eurowise VR6 Coolant Tank Mounting And Hose Routing Installation Guide
- May 15, 2024
- eurowise
Table of Contents
eurowise VR6 Coolant Tank Mounting And Hose Routing
Product Information
Eurowise Coolant Tank
The Eurowise Coolant Tank is designed for use with 24-valve VR6 engines,
specifically the AFP models.
Specifications
- Engine Compatibility: 24 valve VR6 AFP
- Material: High-quality plastic
- Colour: Black
- Manufacturer: Eurowise
Product Usage Instructions
Mounting and Hose Routing
For AFP Models with Heat:
- Route the upper tank hose to the heater core hose.
- Route the opposite heater core hose to the back of the VR6 cylinder head nipple.
For AFP Non-Heat Models:
- Use the supplied 90-degree hose and route the upper pipe back into the top of the cylinder head nipple.
- Route the longer hose to the smaller hose on the thermostat housing under the intake manifold.
Contact Information
If you have any questions, comments, or concerns related to your product,
please contact Eurowise at:
- 440 Springbrook Road, Charlotte, NC 28217
- Phone: 704-559-8100
- Email: info@eurowise.com
- Website: www.eurowise.com
FAQ (Frequently Asked Questions)
-
Q: Can this coolant tank be used with engines other than the 24-valve VR6 AFP?
A: No, this coolant tank is specifically designed for use with 24-valve VR6 AFP engines. -
Q: Is installation of the coolant tank difficult?
A: Installation instructions are provided in the user manual. If you encounter any difficulties, please contact Eurowise for assistance.
We will try to continuously update this thread as there are many ways to route the hoses. We will show you the way we do ours. If you don’t see your version listed here please don’t hesitate to email us. info@eurowise.com.
Assembly Instruction
AAA
- On AAA non-heat models use the supplied 90-degree hose and route the upper pipe back into the top of the cylinder head nipple.
- On AAA models with head route the upper tank hose to the heater core hose and route the opposite heater core hose to the back of the VR6 cylinder head nipple.
Routing for (Heat models can be seen here ).
24 valve VR6
AFP
On AFP models with head route the upper tank hose to the heater core hose and route the opposite heater core hose to the back of the VR6 cylinder head nipple. Routing for (Heat models can be seen here).
On AFP non-heat models use the supplied 90-degree hose and route the upper pipe back into the top of the cylinder head nipple.
24 valve VR6
3.6 VR6
- The opposite end of the longer hose routes to the smaller hose on the thermostat housing under the intake manifold.
- Routing for (Heat models can be seen here ).
IF YOU HAVE ANY QUESTIONS, COMMENTS, OR CONCERNS RELATED TO YOUR PRODUCT PLEASE CONTACT US!
Contact Information
- 440 SPRINGBROOK ROAD. CHARLOTTE, NC 28217
- 704-559-8100
- INFO@EUROWISE.COM
- WWW.EUROWISE.COM
- SHOP.EUROWISE.COM.
References
- Specializing in European Service, Performance and Fabrication – Eurowise Performance
- Eurowise Audi, BMW, Volkswagen, Mercedes, & Porsche Service
- eurowise – Profile – Eurowise Forum
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>