MEAN WELL ELG-75 Constant Voltage Constant Current LED Driver series Owner’s Manual
- May 15, 2024
- MEAN WELL
Table of Contents
- ELG-75 Constant Voltage Constant Current LED Driver series
- Specifications
- Product Usage Instructions
- Installation:
- Maintenance:
- Troubleshooting:
- Q: Can I use this LED driver for outdoor applications?
- Q: How do I adjust the voltage and current settings?
- Q: What is the maximum number of LED drivers I can connect to a
ELG-75 Constant Voltage Constant Current LED Driver series
“`html
Specifications
| MODEL | DC VOLTAGE | RATED CURRENT | RATED POWER | OUTPUT | RIPPLE & NOISE (max.) |
|---|---|---|---|---|---|
| ELG-75-12 | 12V | 5A | 60W | 48W | 150mVp-p |
| ELG-75-24 | 24V | 3.15A | 75.6W | 60W | 200mVp-p |
| ELG-75-36 | 36V | 2.1A | 75.6W | 60W | 250mVp-p |
| ELG-75-42 | 42V | 1.8A | 75.6W | Not specified | Not specified |
| ELG-75-48 | 48V | 1.6A | 76.8W | Not specified | Not specified |
Product Usage Instructions
Installation:
-
Ensure power supply is turned off before installation.
-
Connect the LED driver to the appropriate power source based on
the DC voltage requirement. -
Securely mount the LED driver in a suitable location, ensuring
proper ventilation. -
If adjustments are needed, use the built-in potentiometer for
voltage and current adjustments.
Maintenance:
To ensure optimal performance, regularly check for any dust
accumulation on the LED driver and clean if necessary. Avoid
exposure to moisture or extreme temperatures.
Troubleshooting:
If the LED driver malfunctions or the connected LEDs do not
illuminate properly, check the input power source, connections, and
adjust voltage/current settings if needed.
Frequently Asked Questions (FAQ)
Q: Can I use this LED driver for outdoor applications?
A: Yes, the IP65/IP67 rating allows for safe outdoor usage,
providing protection against dust and water ingress.
Q: How do I adjust the voltage and current settings?
A: Use the built-in potentiometer on the LED driver to adjust
the voltage and current within the specified ranges for your
model.
Q: What is the maximum number of LED drivers I can connect to a
16A circuit breaker?
A: The maximum number varies based on the type of circuit
breaker and voltage; please refer to the manual for detailed
guidelines.
“`
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
User’s Manual
IP65 IP67
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
(Please refer safety description)
8
{
A
Dx
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
SPECIFICATION
MODEL
ELG-75-12
ELG-75-24
ELG-75-36
ELG-75-42
ELG-75-48
DC VOLTAGE
12V
CONSTANT CURRENT REGION Note.2 6 ~ 12V
RATED CURRENT
5A
200VAC ~ 305VAC
24V 12 ~ 24V 3.15A
36V 18 ~ 36V 2.1A
42V 21 ~ 42V 1.8A
48V 24 ~ 48V 1.6A
RATED POWER
60W Note.5 100VAC ~ 180VAC
75.6W
75.6W
75.6W
76.8W
OUTPUT
48W
60W
60W
RIPPLE & NOISE (max.) Note.3 150mVp-p
200mVp-p
250mVp-p
VOLTAGE ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer)
10.8 ~ 13.2V
21.6 ~ 26.4V
32.4 ~ 39.6V
CURRENT ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer)
2.5 ~ 5A
1.57 ~ 3.15A
1.05 ~ 2.1A
VOLTAGE TOLERANCE Note.4 ±3.0%
±3.0%
±2.5%
LINE REGULATION LOAD REGULATION
±0.5% ±2.0%
±0.5% ±1.0%
±0.5% ±1.0%
SETUP, RISE TIME Note.6 500ms, 100ms/115VAC, 230VAC
HOLD UP TIME (Typ.)
10ms/ 230VAC 10ms/ 115VAC(at full load)
VOLTAGE RANGE
100 ~ 305VAC 142 ~ 431VDC Note.5 (Please refer to “STATIC CHARACTERISTIC” section)
60W 250mVp-p
37.8 ~ 46.2V
0.9 ~ 1.8A ±2.5% ±0.5% ±0.5%
60W 250mVp-p
43.2 ~ 52.8V
0.8 ~ 1.6A ±2.0% ±0.5% ±0.5%
FREQUENCY RANGE POWER FACTOR
47 ~ 63Hz
PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER
FACTOR (PF) CHARACTERISTIC” section)
TOTAL HARMONIC DISTORTION
THD< 20%(@load50%/115VC,230VAC; @load75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
INPUT
EFFICIENCY (Typ.)
86%
88%
89%
90%
90%
AC CURRENT
0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC
INRUSH CURRENT(Typ.)
COLD START 50A(twidth=350s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION
No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / AB / DA-Type
OVER CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
14 ~ 18V
28 ~ 34V
41 ~ 48V
Shut down output voltage, re-power on to recover
47 ~ 54V
54 ~ 62V
OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
Shut down output voltage, re-power on to recover Tcase=-40 ~ +85 (Please refer
to ” OUTPUT LOAD vs TEMPERATURE” section) Tcase=+85 20 ~ 95% RH non-condensing
-40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 60)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type”HL”), CSA C22.2 No. 250.13-12; IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS
EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384;EAC TP TC
004;BISIS15885(for 12A/12DA/12B/24A/24B/24DA/36A/36B/42A/42B/48A/48B only);
IP65 or IP67; GB19510.1, GB19510.14; KC61347-1,KC61347-2-13 approved
SAFETY & EMC
OTHERS NOTE
DALI STANDARDS
Compliance to IEC62386-101,102,(207 by request) for DA Type only
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load50%) ; BS EN/EN61000-3-3; GB17743, GB17625.1; EAC TP TC 020; KC KN15,KN61547
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547
MTBF
3451.7K hrs min. Telcordia SR-332 (Bellcore) ;331.3K hrs min. MIL-HDBK-217F (25)
DIMENSION
1806335.5mm (LWH)
PACKING
0.8Kg;16pcs/13.4Kg/0.67CUFT
Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
Block Diagram
EMI FILTER
I/P
&
RECTIFIERS
PFC CIRCUIT
POWER SWITCHING
O.T.P.
O.L.P.
PWM & PFC CONTROL
CASE :Protective Earth
RECTIFIERS &
FILTER
PFC fosc : 50~120KHz PWM fosc : 60~130KHz
Vo+ VoO.L.P.
DETECTION CIRCUIT
O.V.P.
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
100
Vo(%)
50 (min.)
(A) Constant
Voltage area
(B) Constant Current area
(C) Hiccup Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
DIMMING OPERATION
AC/N(Blue) AC/L(Brown)
ELG-75
DIM+(Purple)* DIM-(Pink)** Vo-(Black) Vo+(Red)
3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three
methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or
resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with
additional drivers. Dimming source current from power supply: 100A (typ.)
- DIM+ for B/AB-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B/AB-Type DA- for DA-Type PROG- for D2-Type
Applying additive 0 ~ 10VDC
100%
90%
Vo+ +
80%
70%
Output current (%)
Vo-
60%
–
50%
DIM+ +
40%
Additive Voltage
30%
–
20%
DIM-
10%
“DO NOT connect “DIM- to Vo-”
0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
Vo+ +
Vo-
–
DIM+
Additive PWM signal DIM-
“DO NOT connect “DIM- to Vo-”
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM
signal dimming input
Applying additive resistance:
100%
Output current (%)
Vo+ +
VoDIM+
90%
80%
70%
–
60%
50%
40%
Additive Resistance
30%
DIM-
20%
“DO NOT connect “DIM- to Vo-”
10%
0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation)
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and
DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed
at 8% of output.
Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart
timer dimming primarily provides the adaptive proportion dimming profile for
the output constant current level to perform up to 14 consecutive hours. 3
dimming profiles hereunder are defined accounting for the most frequently seen
applications. If other options may be needed, please contact MEAN WELL for
details.
Ex : D01-Type: the profile recommended for residential lighting
Set up for D01-Type in Smart timer dimming software program:
T1
T2
T3
T4
TIME**
06:00
07:00
11:00
—
LEVEL** 100%
70%
50%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a residential lighting application adopts D01-Type, when
turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100%
starting from 6:00pm. [2] The power supply will switch to the constant current
level at 70% in turn, starting from 0:00am, which is 06:00 after the power
supply turns on. [3] The power supply will switch to the constant current
level at 50% in turn, starting from 1:00am, which is 07:00 after the power
supply turns on. [4] The power supply will switch to the constant current
level at 70% in turn, starting from 5:00am, which is 11:00 after the power
supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power
supply turns on.
Ex: D02-Type: the profile recommended for street lighting
Set up for D02-Type in Smart timer dimming software program:
TIME LEVEL
T1 01:00 50%
T2 03:00 80%
T3 8:00 100%
T4
T5
11:00
—
60%
80%
Dimming Level(%)
Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas
LEVEL matches Dimming Level. Example: If a street lighting application adopts
D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The
power supply will switch to the constant current level at 50% starting from
5:00pm. [2] The power supply will switch to the constant current level at 80%
in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in
turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn,
starting from 1:00am, which is 08:00 after the power supply turns on. [5] The
power supply will switch to the constant current level at 80% in turn,
starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power
supply turns on.
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
Ex: D03-Type: the profile recommended for tunnel lighting
Set up for D03-Type in Smart timer dimming software program:
T1
T2
T3
TIME**
01:30
11:00
—
LEVEL** 70%
100%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a tunnel lighting application adopts D03-Type, when turning
on the power supply at 4:30pm, for instance: [1] The power supply will switch
to the constant current level at 70% starting from 4:30pm. [2] The power
supply will switch to the constant current level at 100% in turn, starting
from 6:00pm, which is 01:30 after the power supply turns on. [3] The power
supply will switch to the constant current level at 70% in turn, starting from
5:00am, which is 11:00 after the power supply turns on. The constant current
level remains till 6:30am, which is 14:00 after the power supply turns on.
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
OUTPUT LOAD vs TEMPERATURE(Note.9)
LOAD (%)
THD LOAD (%)
100
80 230VAC input only
60
40
20
-40
-25 -10 0
15
30
50
60
70 (HORIZONTAL)
AMBIENT TEMPERATURE,Ta ()
LOAD (%)
100
80 230VAC input only
60
40
20
-40 -25 0
20
45
55
65
75
85 (HORIZONTAL)
Tcase ()
STATIC CHARACTERISTIC
100 90 80 70 60 50 40
100 120 140 160 180 200 240 250 260 270 280 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.
PF
POWER FACTOR (PF) CHARACTERISTIC
Tcase at 75 Constant Current Mode
1
0.95
0.9
0.85
0.8
0.75
0.7
277V
0.65
0.6
230V
0.55
0.5
115V
0.45
0.4
0.35
0.3
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
LOAD
TOTAL HARMONIC DISTORTION (THD)
48V Model, Tcase at 75
18%
16%
14%
12%
10%
8%
277V75W
230V75W 6%
115V60W 4%
2%
0% 50% 60% 70% 80% 90% 100%
LOAD
EFFICIENCY(%)
EFFICIENCY vs LOAD
ELG-75 series possess superior working efficiency that up to 90% can be
reached in field applications. 48V Model, Tcase at 75
92 90 88 86 84 82 80 78 76 74 72 70
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V75W 230V75W 115V60W
LOAD
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
LIFETIME
LIFETIME(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tc a s e ()
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
Mechanical Specification
Blank-Type
CASE NO.: 243A Unit:mm
180 169
300±20
156
300±20
63
45.8
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
85 tc
4-4.5
tc : Max. Case Temperature
20
SJOW 17AWGx2C &05RN-F 1.0mm2
Vo-(Black) Vo+(Red)
35.5
35
A-Type
180 169
300±20
156
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
85 tc
4-4.5
tc : Max. Case Temperature
20
45.8
63
300±20
SJOW 17AWGx2C &05RN-F 1.0mm2
Vo-(Black) Vo+(Red)
35.5
35
21
30.25 44.25
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
AB-Type
180 169
300±20
156
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
85 tc
4-4.5
tc : Max. Case Temperature
20
45.8
63
300±20
UL2517 20AWGx2C
SJOW 17AWGx2C &05RN-F 1.0mm2
DIM+(Purple) DIM-(Pink) Vo-(Black) Vo+(Red)
35.5
35
21
30.25 44.25
B/DA/D2-Type
180 169
300±20
156
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
85 tc
4-4.5
tc : Max. Case Temperature
20
45.8
63
300±20
UL2517 20AWGx2C
SJOW 17AWGx2C &05RN-F 1.0mm2
DIM+(Purple)* DIM-(Pink)** Vo-(Black) Vo+(Red)
- DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B-Type DA- for DA-Type PROG- for D2-Type
35.5
35
File Name:ELG-75-SPEC 2022-03-16
E L G – 7 5 48~75W Constant Voltage + Constant Current LED Driver
series
3Y Model (3-wire input)
180 169
300±20
156
20 45.8 63
AC/N(Blue) AC/L(Brown) PE (Green/Yellow)
SJOW 17AWGx3C &H05RN-F 1.0mm2
85 tc
4-4.5
tc : Max. Case Temperature
Note1: Please connect the case to PE for the complete EMC deliverance and safety use. Note2: Please contact MEAN WELL for input wiring option with PE.
SJOW 17AWGx2C &05RN-F 1.0mm2
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
File Name:ELG-75-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
User’s Manual
IP65 IP67
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
( P l e a s er e f e rs a f e t yd e s c r i p t i o n )
{
A
Dx
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
SPECIFICATION
MODEL OUTPUT
ELG-150-12
ELG-150-24
ELG-150-36
ELG-150-42
DC VOLTAGE
12V
CONSTANT CURRENT REGION Note.2 6 ~ 12V
RATED CURRENT
10A
RATED CURRENT(for BE Type only) 8A
24V 12 ~ 24V 6.25A 5.6A
36V 18 ~ 36V 4.17A 3.73A
42V 21 ~ 42V 3.57A 3.2A
100VAC ~ 180VAC
RATED POWER
(For All the Types) 84W 200VAC ~ 305VAC
(Except for BE Type) 120W
105W 150W
105W 150.1W
105W 150W
(For BE Type only) 96W
134.4W
134.28W
134.4W
RIPPLE & NOISE (max.) Note.3 150mVp-p
200mVp-p
250mVp-p
250mVp-p
VOLTAGE ADJ. RANGE
Adjustable for A/AB-Type only (via the built-in potentiometer)
10.8 ~ 13.2V
21.6 ~ 26.4V
32.4 ~ 39.6V
37.8 ~ 46.2V
CURRENT ADJ. RANGE
Adjustable for A/AB-Type only (via the built-in potentiometer)
5 ~ 10A
3.2 ~ 6.25A
2.1 ~ 4.17A
VOLTAGE TOLERANCE Note.4 ±3.0%
±3.0%
±2.5%
LINE REGULATION
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±2.0%
±1.0%
±1.0%
AUXILIARY DC OUTPUT
Nominal 15V(deviation 11.5~15.5V)@0.3A for BE-Type only
SETUP, RISE TIME Note.6 1600ms, 80ms/115VAC 500ms, 100ms/230VAC
HOLD UP TIME (Typ.)
10ms/115VAC, 230VAC
1.8 ~ 3.57A ±2.5% ±0.5% ±0.5%
VOLTAGE RANGE
100 ~ 305VAC 142 ~ 431VDC Note.5 (Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR
PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
ELG-150-48 48V 24 ~ 48V 3.13A 2.8A
105W
150.2W 134.4W 250mVp-p
43.2 ~ 52.8V
1.56 ~ 3.13A ±2.0% ±0.5% ±0.5%
ELG-150-54 54V 27 ~ 54V 2.8A 2.5A
105W
151.2W 135W 350mVp-p
49 ~ 58V
1.4 ~ 2.8A ±2.0% ±0.5% ±0.5%
TOTAL HARMONIC DISTORTION
THD< 20%(@load50%/115VC; @load60%/230VAC; @load75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
INPUT
EFFICIENCY (Typ.)
88.5%
89%
90%
90%
90%
91%
EFFICIENCY (Typ.)(for BE Type only) 86%
89%
89%
89%
89%
89%
AC CURRENT INRUSH CURRENT(Typ.)
1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC COLD START 65A(twidth=550s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD / STANDBY POWER CONSUMPTION
No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / AB / DA-Type
OVER CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY & DALI STANDARDS
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
14 ~ 18V
28 ~ 34V
41 ~ 48V
Shut down output voltage, re-power on to recover
47 ~ 54V
54 ~ 62V
59 ~ 68V
Shut down output voltage, re-power on to recover
Tcase=-40 ~ +90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)
Tcase=+90
20 ~ 95% RH non-condensing
-40 ~ +80, 10 ~ 95% RH
±0.03%/ (0 ~ 60)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type”HL”)(except for BE-type), CSA C22.2 No. 250.13-12;IEC/BS EN/EN/AS/NZS 61347-1,IEC/BS EN/EN/AS/NZS 61347-2-13 independent,BS EN/EN62384,BISIS15885(for 12/12A/12B/12DA/24/24A/24B/24DA/36A/36B/42/42A/42B/48A/48B/54/54A/54B only), EAC TP TC 004,GB19510.1,GB19510.14; IP65 or IP67; KC61347-1,KC61347-2-13 approved
Compliance to IEC62386-101,102,(207 by request) for DA Type only
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load60%) ; BS EN/EN61000-3-3; Gb17743,GB17625.1, EAC TP TC 020; KC KN15,KN61547
OTHERS NOTE
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV),EAC TP TC 020; KC KN15,KN61547
MTBF
2661.6K hrs min. Telcordia SR-332 (Bellcore) ;313.7K hrs min. MIL-HDBK-217F (25)
DIMENSION
2196335.5mm (LWH)
PACKING
0.95Kg ; 16pcs/16.0kg/0.77CUFT
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
Block Diagram
PFC fosc : 50~120KHz PWM fosc : 60~130KHz
EMI FILTER
I/P
&
RECTIFIERS
PFC CIRCUIT
POWER
RECTIFIERS
Vo+
SWITCHING
& FILTER
Vo-
O.L.P.
O.T.P.
O.L.P.
PWM & PFC CONTROL
DETECTION CIRCUIT
O.V.P.
CASE :Protective Earth
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
100
Vo(%)
50 (min.)
(A) Constant
Voltage area
(B) Constant Current area
(C) Hiccup Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
This characteristic applies to Blank/A/B/AB/DX/D2/BE-Type, For DA-Type, the Constant Current area is 60%~100% Vo.
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
DIMMING OPERATION
AC/N(Blue) AC/L(Brown)
ELG-150
DIM+(Purple)* DIM-(Pink)** Vo-(Black) Vo+(Red)
3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)
Applying additive 0 ~ 10VDC
100%
- DIM+ for B/AB-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B/AB-Type DA- for DA-Type PROG- for D2-Type
90%
Vo+ +
80%
70%
Output current (%)
Vo-
60%
–
50%
DIM+ +
40%
Additive Voltage
30%
–
20%
DIM-
10%
“DO NOT connect “DIM- to Vo-”
0% 0V 1V
2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
Vo+ +
Vo-
–
DIM+
Additive PWM signal DIM-
“DO NOT connect “DIM- to Vo-”
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM
signal dimming input
Applying additive resistance:
100%
Output current (%)
Vo+ +
VoDIM+
90%
80%
70%
–
60%
50%
40%
Additive Resistance
30%
DIM-
20%
“DO NOT connect “DIM- to Vo-”
10%
0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity forsynchronizeddimmingoperation)
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and
DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed
at 8% of output.
Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart
timer dimming primarily provides the adaptive proportion dimming profile for
the output constant current level to perform up to 14 consecutive hours. 3
dimming profiles hereunder are defined accounting for the most frequently seen
applications. If other options may be needed, please contact MEAN WELL for
details.
Ex : D01-Type: the profile recommended for residential lighting
Set up for D01-Type in Smart timer dimming software program:
T1
T2
T3
T4
TIME**
06:00
07:00
11:00
—
LEVEL** 100%
70%
50%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a residential lighting application adopts D01-Type, when
turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100%
starting from 6:00pm. [2] The power supply will switch to the constant current
level at 70% in turn, starting from 0:00am, which is 06:00 after the power
supply turns on. [3] The power supply will switch to the constant current
level at 50% in turn, starting from 1:00am, which is 07:00 after the power
supply turns on. [4] The power supply will switch to the constant current
level at 70% in turn, starting from 5:00am, which is 11:00 after the power
supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power
supply turns on.
Ex: D02-Type: the profile recommended for street lighting
Set up for D02-Type in Smart timer dimming software program:
TIME LEVEL
T1 01:00 50%
T2 03:00 80%
T3 8:00 100%
T4
T5
11:00
—
60%
80%
Dimming Level(%)
Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas
LEVEL matches Dimming Level. Example: If a street lighting application adopts
D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The
power supply will switch to the constant current level at 50% starting from
5:00pm. [2] The power supply will switch to the constant current level at 80%
in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in
turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn,
starting from 1:00am, which is 08:00 after the power supply turns on. [5] The
power supply will switch to the constant current level at 80% in turn,
starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power
supply turns on.
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
Ex: D03-Type: the profile recommended for tunnel lighting
Set up for D03-Type in Smart timer dimming software program:
T1
T2
T3
TIME**
01:30
11:00
—
LEVEL** 70%
100%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a tunnel lighting application adopts D03-Type, when turning
on the power supply at 4:30pm, for instance: [1] The power supply will switch
to the constant current level at 70% starting from 4:30pm. [2] The power
supply will switch to the constant current level at 100% in turn, starting
from 6:00pm, which is 01:30 after the power supply turns on. [3] The power
supply will switch to the constant current level at 70% in turn, starting from
5:00am, which is 11:00 after the power supply turns on. The constant current
level remains till 6:30am, which is 14:00 after the power supply turns on.
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
OUTPUT LOAD vs TEMPERATURE(Note.9)
LOAD (%)
100 90 80 230VAC
input only 60
40
20
for BE Type
-40
-25 -10 0
15
30
50 55 60
70 (HORIZONTAL)
AMBIENT TEMPERATURE,Ta ()
LOAD (%)
100
80 230VAC input only
60
40
20
-40 -25 0
10
30
50
70
Tcase ()
85
90 (HORIZONTAL)
STATIC CHARACTERISTIC
LOAD (%)
100 90 80 70 60 50 40
100 120 140 160 180 200 240 250 260 270 280 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.
TOTAL HARMONIC DISTORTION (THD)
54V Model, Tcase at 80
22% 20% 18% 16% 14% 12% 10%
8% 6% 4% 2%
50%
60%
70%
80%
90% 100%
2 7 7 VAC (1 5 0 W) 2 3 0 VAC (1 5 0 W) 1 1 5 VAC (1 0 5 W)
LOAD
EFFICIENCY(%)
PF
POWER FACTOR (PF) CHARACTERISTIC
Tcase at 80 Constant Current Mode
1 0 .9 8 0 .9 6 0 .9 4 0 .9 2
0 .9 0 .8 8 0 .8 6
50% 60% 70% 80% 90% 100%
2 7 7 V(1 5 0 W) 2 3 0 V(1 5 0 W) 1 1 5 V(1 0 5 W)
LOAD
EFFICIENCY vs LOAD
ELG-150 series possess superior working efficiency that up to 91% can be
reached in field applications. 54V Model, Tcase at 80
94 92 90 88 86 84 82 80
50% 60% 70% 80% 90% 100% LOAD
277V(150W) 230V(150W) 115V(105W)
File Name:ELG-150-SPEC 2022-03-16
THD
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
LIFE TIME
LIFETIME(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase ( )
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
Mechanical Specification
Blank-Type
CASE NO.: 237A Unit:mm
219
208
300±20
195
300±20
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
tc
105
tc : Max. Case Temperature
SJOW 17AWGx2C &05RN-F 1.0mm2
Vo-(Black) Vo+(Red)
63 45.8 20 35 35.5
A-Type
300±20
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
63 45.8 20
219 208 195
tc
105
4-4.5
tc : Max. Case Temperature
300±20
SJOW 17AWGx2C &05RN-F 1.0mm2
Vo-(Black) Vo+(Red)
35 35.5
21.5
14 36
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
AB-Type
219
208
300±20
195
63 45.8 20
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
tc
105
4-4.5
tc : Max. Case Temperature
300±20
UL2517 20AWGx2C
SJOW 17AWGx2C &05RN-F 1.0mm2
DIM+(Purple) DIM-(Pink) Vo-(Black) Vo+(Red)
35 35.5
21.5
14 36
B/DA/D2-Type
219
208
300±20
195
AC/N(Blue) AC/L(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
tc
105
4-4.5
tc : Max. Case Temperature
300±20
UL2517 20AWGx2C
SJOW 17AWGx2C &05RN-F 1.0mm2
DIM+(Purple)* DIM-(Pink)** Vo-(Black) Vo+(Red)
- DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B-Type DA- for DA-Type PROG- for D2-Type
63 45.8 20 35 35.5
File Name:ELG-150-SPEC 2022-03-16
E L G – 1 5 0 84~150W Constant Voltage + Constant Current LED Driver
series
BE-Type
219
208
300±20
195
AC/N(Blue) AC/L(Brown)
FG (Green/Yellow)
SJOW 17AWGx3C &H05RN-F 1.0mm2
tc
105
4-4.5
tc : Max. Case Temperature
200±20
SJOW 17AWGx4C &H05RN-F 1.0mm2
SJOW 17AWGx2C &05RN-F 1.0mm2
300±20
AUX+(Red) AUX-(Black) DIM+(Purple) DIM-(Pink)
Vo-(Black) Vo+(Red)
63 45.8 20 35 35.5
3Y Model (3-wire input)
219
208
300±20
195
63 45.8 20
AC/N(Blue) AC/L(Brown) PE (Green/Yellow)
SJOW 17AWGx3C &H05RN-F 1.0mm2
tc
105
4-4.5
tc : Max. Case Temperature
Note1: Please connect the case to PE for the complete EMC deliverance and safety use. Note2: Please contact MEAN WELL for input wiring option with PE.
INSTALLATION MANUAL
SJOW 17AWGx2C &05RN-F 1.0mm2
File Name:ELG-150-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
User’s Manual
IP65 IP67
IS 15885(Part 2/Sec13)
THOMAS SAMUEL
THOMAS SAMUEL
R-41027766
( P l e a s er e f e rs a f e t yd e s c r i p t i o n )
8
{
A
Dx
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
SPECIFICATION
MODEL
ELG-240-24
ELG-240-36
ELG-240-42
DC VOLTAGE
24V
CONSTANT CURRENT REGION Note.2 12 ~ 24V
RATED CURRENT
10A
36V 18 ~ 36V 6.66A
42V 21 ~ 42V 5.71A
RATED POWER
200VAC ~ 305VAC 240W 100VAC ~ 180VAC
239.76W
239.82W
OUTPUT
180W
180W
179.76W
RIPPLE & NOISE (max.) Note.3 200mVp-p
250mVp-p
250mVp-p
VOLTAGE ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer)
22.4 ~ 25.6V
33.5 ~ 38.5V
39 ~ 45V
CURRENT ADJ. RANGE
Adjustable for A/AB-Type only (via built-in potentiometer)
5 ~ 10A
3.33 ~ 6.66A
2.86 ~ 5.71A
VOLTAGE TOLERANCE Note.4 ±2.0%
±2.0%
±2.0%
LINE REGULATION
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME Note.6 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
HOLD UP TIME (Typ.)
10ms/ 230VAC 10ms/ 115VAC
VOLTAGE RANGE
100 ~ 305VAC 142 ~ 431VDC Note.5 (Please refer to “STATIC CHARACTERISTIC” section)
FREQUENCY RANGE POWER FACTOR
47 ~ 63Hz
PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER
FACTOR (PF) CHARACTERISTIC” section)
ELG-240-48 48V 24 ~ 48V 5.0A
240W
180W 250mVp-p
44.8 ~ 51.2V
2.5 ~ 5A ±2.0% ±0.5% ±0.5%
ELG-240-54 54V 27 ~ 54V 4.45A
240.3W
180.36W 350mVp-p
50 ~ 57V
2.23 ~ 4.45A ±2.0% ±0.5% ±0.5%
TOTAL HARMONIC DISTORTION
THD< 20%(@load50%/115VC,230VAC; @load75%/277VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
INPUT
EFFICIENCY (Typ.)
92%
92%
92.5%
93%
93%
AC CURRENT INRUSH CURRENT(Typ.)
2.2A / 115VAC 1.5A / 230VAC 1.2A/277VAC COLD START 60A(twidth=510s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER
4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC
NO LOAD / STANDBY
No load power consumption <0.5W for Blank / A / Dx / D-Type
POWER CONSUMPTION Note.7 Standby power consumption <0.5W for B / AB / DA-Type
OVER CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE
OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
SAFETY STANDARDS
SAFETY & DALI STANDARDS
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
27 ~ 34V
42 ~ 49V
47 ~ 54V
54 ~ 63V
60 ~ 67V
Shut down output voltage, re-power on to recover
Shut down output voltage, re-power on to recover Tcase=-40 ~ +90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)
Tcase=+90
20 ~ 95% RH non-condensing
-40 ~ +90, 10 ~ 95% RH
±0.03%/ (0 ~ 60)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type”HL”), CSA C22.2 No. 250.13-12;IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, BS EN/EN62384; EAC TP TC 004;BISIS15885(for 24/24A/24B/24DA/36/36A/36B/42/42A/42B/48/48A/48B/54/54A/54ADA/54B only); GB19510.14,GB19510.1; IP65 or IP67;KC61347-1,KC61347-2-13 approved
Compliance to IEC62386-101,102,(207 by request) for DA Type only
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load50%) ; BS EN/EN61000-3-3; GB17625.1,GB17743;EAC TP TC 020; KC KN15,KN61547
OTHERS NOTE
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 02; KC KN15,KN61547
MTBF
2391.4K hrs min. Telcordia SR-332 (Bellcore) ; 190.7K hrs min. MIL-HDBK-217F (25)
DIMENSION
2447137.5mm (LWH)
PACKING
1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
Block Diagram
PFC fosc : 50~120KHz PWM fosc : 60~130KHz
EMI FILTER
I/P
&
RECTIFIERS
PFC CIRCUIT
POWER
RECTIFIERS
Vo+
SWITCHING
& FILTER
Vo-
O.L.P.
O.T.P. PFC CONTROL
O.L.P.
PWM & PFC CONTROL
DETECTION CIRCUIT
O.V.P.
CASE :Protective Earth
DRIVING METHODS OF LED MODULE
This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
100
Vo(%)
50 (min.)
(A) Constant
Voltage area
(B) Constant Current area
(C) Hiccup Protection
50
100
Io(%)
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
DIMMING OPERATION
ACN(Blue) ACL(Brown)
ELG-240
Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**
3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three
methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is
suggested. It is not suitable to be used with additional drivers. Dimming
source current from power supply: 100A (typ.)
- DIM+ for B/AB-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B/AB-Type DA- for DA-Type PROG- for D2-Type
Applying additive 0 ~ 10VDC
100%
90%
Vo+ +
80%
70%
Output current (%)
Vo-
60%
–
50%
DIM+ +
40%
Additive Voltage
30%
–
20%
DIM-
10%
“DO NOT connect “DIM- to Vo-”
0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage
Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
Vo+ +
Vo-
–
DIM+
Additive PWM signal DIM-
“DO NOT connect “DIM- to Vo-”
Output current (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM
signal dimming input
Applying additive resistance:
100%
Output current (%)
Vo+ +
VoDIM+
90%
80%
70%
–
60%
50%
40%
Additive Resistance
30%
DIM-
20%
“DO NOT connect “DIM- to Vo-”
10%
0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation)
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and
DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed
at 8% of output.
Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart
timer dimming primarily provides the adaptive proportion dimming profile for
the output constant current level to perform up to 14 consecutive hours. 3
dimming profiles hereunder are defined accounting for the most frequently seen
applications. If other options may be needed, please contact MEAN WELL for
details.
Ex : D01-Type: the profile recommended for residential lighting
Set up for D01-Type in Smart timer dimming software program:
T1
T2
T3
T4
TIME**
06:00
07:00
11:00
—
LEVEL** 100%
70%
50%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a residential lighting application adopts D01-Type, when
turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100%
starting from 6:00pm. [2] The power supply will switch to the constant current
level at 70% in turn, starting from 0:00am, which is 06:00 after the power
supply turns on. [3] The power supply will switch to the constant current
level at 50% in turn, starting from 1:00am, which is 07:00 after the power
supply turns on. [4] The power supply will switch to the constant current
level at 70% in turn, starting from 5:00am, which is 11:00 after the power
supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power
supply turns on.
Ex: D02-Type: the profile recommended for street lighting
Set up for D02-Type in Smart timer dimming software program:
TIME LEVEL
T1 01:00 50%
T2 03:00 80%
T3 8:00 100%
T4
T5
11:00
—
60%
80%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a street lighting application adopts D02-Type, when turning
on the power supply at 5:00pm, for instance: [1] The power supply will switch
to the constant current level at 50% starting from 5:00pm. [2] The power
supply will switch to the constant current level at 80% in turn, starting from
6:00pm, which is 01:00 after the power supply turns on. [3] The power supply
will switch to the constant current level at 100% in turn, starting from
8:00pm, which is 03:00 after the power supply turns on. [4] The power supply
will switch to the constant current level at 60% in turn, starting from
1:00am, which is 08:00 after the power supply turns on. [5] The power supply
will switch to the constant current level at 80% in turn, starting from
4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power
supply turns on.
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
Ex: D03-Type: the profile recommended for tunnel lighting
Set up for D03-Type in Smart timer dimming software program:
T1
T2
T3
TIME**
01:30
11:00
—
LEVEL** 70%
100%
70%
Dimming Level(%)
Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming
Level. Example: If a tunnel lighting application adopts D03-Type, when turning
on the power supply at 4:30pm, for instance: [1] The power supply will switch
to the constant current level at 70% starting from 4:30pm. [2] The power
supply will switch to the constant current level at 100% in turn, starting
from 6:00pm, which is 01:30 after the power supply turns on. [3] The power
supply will switch to the constant current level at 70% in turn, starting from
5:00am, which is 11:00 after the power supply turns on. The constant current
level remains till 6:30am, which is 14:00 after the power supply turns on.
File Name:ELG-240-SPEC 2022-03-16
LOAD (%)
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
OUTPUT LOAD vs TEMPERATURE(Note.10)
100
80 230VAC input only
60
40
20
110VAC
LOAD (%)
100
80 230VAC input only
60
40
110VAC
20
-40
-25 0 10
20
30
50
60
70 (HORIZONTAL)
AMBIENT TEMPERATURE,Ta ()
If ELG-240 operates in Constant Current mode with the rated current, the
maximum workable Ta is 60.
-40 -25 0
20
45
55
65
75
90 (HORIZONTAL)
Tcase ()
STATIC CHARACTERISTIC
100 90 80 75 70 60 50 40
100 120 140 160 180 200 240 250 260 270 280 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.
PF
POWER FACTOR (PF) CHARACTERISTIC
Tcase at 80 Constant Current Mode
1
0.98
0.96
0.94 277V(240W)
0.92
230V(240W)
0.9
115V(180W)
0.88
0.86
50%
60%
70%
80%
90%
100%
LOAD
TOTAL HARMONIC DISTORTION (THD)
48V Model, Tcase at 80
18%
16%
14%
12%
10%
8%
6%
4%
50%
60%
70%
80%
LOAD
277V(240 W) 230V(240 W) 115V(180 W)
90%
100%
EFFICIENCY(%)
EFFICIENCY vs LOAD
ELG-240 series possess superior working efficiency that up to 93% can be
reached in field applications. 48V Model, Tcase at 80
96 94 92 90 88 86 84 82 80
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V(240W) 230V(240W) 115V(180W)
LOAD
THD LOAD (%)
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
LIFE TIME
LIFETIME(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase ( )
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
MECHANICAL SPECIFICATION
Blank-Type
244
233
300±20
220
CASE NO.: 262A Unit:mm
300±20
ACN(Blue) ACL(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
tc
90
4-4.5
tc : Max. Case Temperature
Vo-(Black) Vo+(Red) SJOW 17AWGx2C &05RN-F 1.0mm2
71 53.8 32 37 37.5
A-Type
300±20
ACN(Blue) ACL(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
71 53.8
244 233 220
tc
90
4-4.5
tc : Max. Case Temperature
300±20
Vo-(Black) Vo+(Red) SJOW 17AWGx2C &05RN-F 1.0mm2
32 37 37.5
21.01
14.5 38.5 File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
AB-Type
300±20
ACN(Blue) ACL(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
71 53.8
244 233 220
tc
90
4-4.5
tc : Max. Case Temperature
300±20 SJOW 17AWGx2C &05RN-F 1.0mm2 UL2517 20AWGx2C
Vo-(Black) Vo+(Red) DIM+(Purple) DIM-(Pink)
32 37 37.5
21.01
14.5 38.5
B/DA/D2-Type
300±20
ACN(Blue) ACL(Brown)
SJOW 17AWGx2C &H05RN-F 1.0mm2
244 233 220
tc
90
4-4.5
tc : Max. Case Temperature
300±20 SJOW 17AWGx2C &05RN-F 1.0mm2 UL2517 20AWGx2C
Vo-(Black) Vo+(Red) DIM+(Purple)* DIM-(Pink)**
- DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type
- *DIM- for B-Type DA- for DA-Type PROG- for D2-Type
71 53.8 32 37 37.5
File Name:ELG-240-SPEC 2022-03-16
E L G – 2 4 0 180~240W Constant Voltage + Constant Current LED Driver
series
3Y Model (3-wire input)
300±20
AC/N(Blue) AC/L(Brown) PE (Green/Yellow)
SJOW 17AWGx3C &H05RN-F 1.0mm2
71 53.8 32
244 233 220
tc
90
4-4.5
tc : Max. Case Temperature
SJOW 17AWGx2C &05RN-F 1.0mm2
Note1: Please connect the case to PE for the complete EMC deliverance and safety use. Note2: Please contact MEAN WELL for input wiring option with PE.
INSTALLATION MANUAL
File Name:ELG-240-SPEC 2022-03-16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>