HOME DECORATORS COLLECTION 33654 Rainbrook 2 Light Outdoor Pendant User Manual

Item #1007260822
Model #33654
USE AND CARE GUIDE
RAINBROOK 2 LIGHT OUTDOOR PENDANT

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

• Consult a quailed electrician if you have any electrical questions.

CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-986-3460.
WARNING: Before starting installation of this !true or removal of a previous !true, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

Warranty

The manufacturer warrants this lighting !xture to be free from defects in materials and workmanship for a period of !ve (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and  service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modi! cations, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty  shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the !nish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of !tness for a particular purpose, other than the warranty contained herein. The manufacturer speci!cally disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

Pre-Installation

PLANNING INSTALLATION

• Read all instructions before installation.
• To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
• Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Installation

1. Attaching the mounting unit to the junction box

2. Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring.

3. Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed.

4. Secure the chain (B) to the screw collar loop on the mounting unit (AA) and the top loop of the light fixture (A). Lower the screw collar ring and canopy (C) over the chain (B).

5. Weave the electrical wires, ground wires through the chain (B),canopy (C) and the center of the mounting unit (AA).
   NOTE: Ensure the quick connector is fully closed when installing the chain.

6. Making the electrical connections

7. Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.

8. Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire  nuts (CC) and secure with electrical tape (not included). NOTE: If the wires from the fixture are the same color, attach the smooth wire to the black (positive) wire, attach the ridged wire to the white (neutral) wire.

9. Securing the light fixture

10. Secure the canopy (C) to the mounting unit (AA) with the screw collar ring.
    CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly during installation and use silicone sealant around the canopy for better sealing after installation.

11. Installing the light bulb

12. Secure the socket covers (D) onto the light fixture (A)

13. Install two E12 candelabra 60-watt bulbs (not included).

Operation

1. Turning the light on
2. Turn the light switch on to activate the fixture.

Care and Cleaning

• Clean the lamp with a soft, dry cloth.
• Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

connections.
Contact a qualified electrician or call the Customer Service Team at 1-800-986-3460.

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

References

• Home Decorators Collection - Home Decor - The Home Depot
• Home Decorators Collection - Home Decor - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>