TWISTED MINDS TM24FHD100IPS LED Gaming Monitor Instruction Manual
- May 15, 2024
- TWISTED MINDS
Table of Contents
TWISTED MINDS TM24FHD100IPS LED Gaming Monitor
Product Specifications
- Model: TM24FHD100IPS
- Screen Size: 23.8 inches
- Refresh Rate: 100Hz
- Resolution: 1920 x 1080
- Contrast Ratio: 1000:1 (TYP)
- Color Depth: 16.7 million
- Dimensions: 539 x 321 x 42 mm
- Weight: 2.54 kg
- Power Input: DC 12V, 2.5A
Product Usage Instructions
Connection Setup
- HDMI interface: Use the HDMI cable to connect the monitor’s HDMI IN port to the HDMI OUT port of a PC.
- VGA interface: Use the VGA cable to connect the monitor’s VGA IN port to the VGA OUT port of a PC.
- AUDIO: Connect audio devices using the Audio In and Audio Out ports as necessary.
- Power: Connect the power adapter to the monitor and plug it into a power socket.
Settings Adjustment
- Brightness: Adjust the brightness level using the on-screen menu.
- Contrast: Modify the contrast setting to your preference.
- Color Settings: Fine-tune settings such as Black Equalizer, Low Blue, Eco mode, and DCR as needed.
Additional Features
- GamePlus: Explore additional gaming features provided by the monitor.
Frequently Asked Questions (FAQ)
-
Q: Can I use this monitor with a gaming console?
A: Yes, you can connect gaming consoles using compatible cables to the monitor’s available ports. -
Q: How do I adjust the monitor for optimal gaming performance?
A: You can adjust settings like brightness, contrast, and color settings to enhance your gaming experience.
EMAIL : INFO@TWISTEDMINDS.CO
WEBSITE : WWW.TWISTEDMINDS.CO
Notices
Before using this product, please read this User Manual carefully and keep
it well
- Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
- Make sure the monitor is placed on a flat surface. If the monitor falls down, it mat cause human iniury or device damage.
- Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
- Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
- The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
- If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
- Please use a reliable earthing socket, do not overload the socket, or it mat cause fire or electric shock.
- Do not put foreign matters into the monitor,or it may cause short circuits resulting fire or electric shock.
- Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
- Do not pull or twist the power cable forcedly.
- There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or thr product may be damaged and the warranty will be invalid.
Product introduction
Packing list
- Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
- The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
- Wires supplied may vary with purchased products. Figures in this User Manual are for reference only.
- Redunda nt screws can be used as spa re screws.
Installation
Installation of base
- Take out the Stand Neck and base, and assemble the base with a screw.
- Insert the assembled neck into the monitor until you hear a “cicl k” sound, the installation is complete.
- After assembly, simply hold the stand with hand to stand the monitor uplight.
Note : During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.
Adjusting the monitor
- Tilting angle -5.0°(±2.0°)- +15°(±2.0°)
Usage
Description of buttons
Explanation of indicators
- Indicator: Steady green light indicates the power is on and the monitor runs normally. Green light flashing indicates no video source and no horizontal or vertical signal detected or low voltage. Please make sure your computer is turned on and all video cables are fully plugged in and/or connected.
Cable connection:
-
- The bottom interface configuration at the back of the monitor varie with products.
-
- Note : If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.
HDMI interface
VGA interface
AUDIO IN
AUDIO OUT
Power Adapter
OSD menu
Menu description
- The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
- Specifications of the OSD menu may change with improvements of functions without prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.
- Press to enter the OSD screen.
- Press or to scroll through the functions.
- Select the desired function, and press to enter the sub-menu.
- Press or to scroll through sub-menus, and press key to select and confirm the desired function.
- Press or to select one option, and press to confirm settings and exit from the current menu.
- Press to exit from the menu screen.
Functions of the monitor vary with models, and the functions in this manual
are for reference only.
Basic parameters
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
P/N:750-00-02999
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>