TWISTED MINDS TM22FHD100IPS 21.45 Inch LED Gaming Monitor Instruction Manual

TWISTED MINDS TM22FHD100IPS 21.45 Inch LED Gaming Monitor

Notices

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it mat cause human iniury or device damage.
• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable earthing socket, do not overload the socket, or it mat cause fire or electric shock.
• Do not put foreign matters into the monitor,or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or thr product may be damaged and the warranty will be invalid.

Product introduction

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor.
• The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
• Wires supplied may vary with purchased products. Figures in this User Manual are for reference only.
• Redunda nt screws can be used as spare screws.

Installation

Installation of base

1. Take out the Stand Neck and base, and assemble the base with a screw.
2. Insert the assembled neck into the monitor until you hear a “ciclk” sound, the installation is complete.
3. After assembly, simply hold the stand with hand to stand the monitor upright.

Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid damage to the screen.

Adjusting the monitor

• Tilting angle -5.0°(±2.0°)- +15°(±2.0°)

Usage

Description of buttons

Explanation of indicators

Indicator: Steady green light indicates the power is on and the monitor runs normally. Green light flashing indicates no video source and no horizontal or vertical signal detected or low voltage. Please make sure your computer is turned on and all video cables are fully plugged in and/or connected.

Cable connection:

• The bottom interface configuration at the back of the monitor varie with products.
• Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

OSD menu

Menu description

• The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the figure.
• Specifications of the OSD menu may change with improvements of functions without prior notice.

The screen display (OSD) menu can be used to adjust the settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.

1. Press to enter the OSD screen.
2. Press DOWN or UP to scroll through the functions.
   • Select the desired function, and press to enter the sub-menu.
   • Press  DOWN or UP to scroll through the sub-menus, and press  key to select and confirm the desired function.
   • Press DOWN or UP to select one option, and press  to confirm settings and exit from the current menu.
3. Press POWER to exit from the menu screen.
   • Functions of the monitor vary with models, and the functions in this manual are for reference only.

Brightness

| Brightness| 0-100
---|---|---
Contrast| 0-100
Black equalizer| 0-100
Low blue| Off/On
Eco Mode| Standard/Text/Game/FPS/RTS/Movie
DCR| Off/On

Image

| H.Position| 0-100
V.Position| 0-100
Clock| 0-100
Phase| 0-100
Aspect| Wide (16:9), 4:3
FREE SYNC| Off/On

Color Temp.

| Color Temp.| Warm/Cool/User
Red| 0-100
Green| 0-100
Blue| 0-100
HDR mode| Off/On

OSD Setup

| Language| 12 Countries Language(Defaut:English)
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Timer| 5-60
Transparence| 0-100

Reset

| Image Auto adjust| /
Color Auto adjust| /
Reset| /
Auto Power down| Off/On
Timecount| 10-90
OD| Off/On

Misc.

| Signal source| HDMI / VGA
Mute| Off/On
Volume| 0-100
MPRT| Off/On

Basic parameters

The standard voltage and current may vary with countries, please refer to the

label at the back of the product.

Product Dimentions

Normal base

| Without base| 49228142mm/ weightx2.13kg
With base| 492380170mm/ weightx2.94kg
Tilting angle| Forward titling: 5°±2°; Backward tilting : 15°±2°
Height range| NA
Rotation angle| NA
Vertical angle| NA

Environmental conditions

| Action| Temperature: 0°C~ 40°C (32°F ~ 104°F)

Humidity: 10%~90% RH (non-condensing)

Storage| Temperature: -20°~ 60° (-4°F ~ 140°F)

Humidity: 5%~95% RH (non-condensing)

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

• P/N:750-00-02999

References

• Twisted Minds | All Rules Broken – Twisted Minds UAE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>