BOMANN KG 7354 IX French Door User Manual

HOUSEHOLD FRIDGE / FREEZER
KG 7354 IX

Instruction manual ****

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these instructions for use
Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage.

WARNING:
This warns you of dangers to your health and indicates possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other objects.
NOTE: This highlights tips and information.

General notes

Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to  other people, also pass on the operating instructions.

NOTE:

• Due to constant product modifications, your appliance may differ slightly from these operating instructions; functions and methods of use remain unchanged.
• The illustrations in these operating instructions are for illustrative purposes only and may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appli- ance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any other purpose. Any other use is not intended and can result in damages or personal injuries.
• This appliance is not intended to be used as a built-in appliance.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight and humidity.
• When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
• The appliance and if possible the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• For safety reasons, alterations or modifications of the appliance are prohibited.
• To ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

**WARNING:**
Do not allow small children to play with the foil.
There is a danger of suffocation!

Special safety information for this unit

• This unit is intended to be used in household and similar applications such as
  – staff kitchen areas in shops, offices and other working environments;
  – farm houses and by clients in hotels, motels and other residential type environments;
  – bed and breakfast type environments;
  – catering and similar non-retail applications.

WARNING:

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not store explosive substances such as aerosol containers with flammable propellant in the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• NOTE: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
• Do not repair the appliance by yourself, always consult an authorized specialist. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. In case of damage, the   ppliance must not be used!
• Use the provided collection points of electrical equipment for the disposal of the appliance.

Coolant
WARNING: Risk of fire / flammable materials
The coolant circuit of this unit contains the refrigerant Isobutane (R600a), a natural gas that is flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during transport and installation of the appliance.

If the coolant circuit is damaged:

• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is installed and
• contact an authorized technician.

Transport and packaging

Transport the appliance
Transport the appliance, if possible, in vertical position.
Otherwise, it is absolutely necessary to allow the appliance standing upright for a few hours before installation ”Prior to first use”.
Protect the appliance during transport against weather influences.

**NOTE:**
The appliance has castors which make it easier for you to transport or install the appliance. Tilt the appliance slightly backwards and move it carefully.

CAUTION:
Use the castors only for forward or backward movement, otherwise the floor and castors could be damaged.

Unpacking the appliance

• Remove the appliance from its packaging.

• Remove all packaging material, such as foils, filler and cardboard packaging.
  Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.

• To prevent hazards, check the appliance for any transport damage.

• In case of damage, do not put the appliance into operation. Contact your distributor.

NOTE:
Production residue or dust may have collected on the appliance. We recommend cleaning the appliance according to chapter “Cleaning and maintenance”.

Appliance equipment

Appliance overview

1. Glass shelves
2. Door storage racks
3. Glass cover of fresh food drawer
4. Fresh food drawer
5. Freezing tray
6. Freezing drawer
7. Feet

Delivery scope
4x glass shelf, 1x drawer, 6x door storage rack,
1x egg tray, 1x ice cube tray

Installation

Conditions for the installation location

• Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient cooling operation at low power consumption. Enough clearance is necessary.
  – Gap to the back approx. 50～70 mm, to the side walls and above the device each approx. min. 100 mm;
  – Place the appliance so that the appliance door can open without being impeded.

Sizes in mm

• Only install at a location with an ambient temperature suitable for the climate class of the appliance.The climate class can be found under “Technical data” and on the rating label located in the interior or on the appliance rear.

• Place the appliance on a steady and safe surface.
  If the appliance is not horizontally leveled, adjust the feet accordingly.

• Avoid the installation:
  – near heaters, next to a stove, direct sunlight or any other heat sources;
  – at locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to corrosion under such circumstances;
  – near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.), in rooms which may have poor air circulation (e.g. garages).
  – Do not expose the appliance any weather.

Leveling the appliance
Slight unevenness in the floor can be leveled out using the front feet.
Check whether the appliance is leveled horizontally.If the appliance is not in balance, the feet must be adjusted.

Electrical connection
WARNING:

• The installation to the mains supply must conform to the local standards and regulations.
• Improper connection may cause to an electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by an authorized specialist.
• The accessibility of the power plug must be ensured to disconnect the appliance from the power supply in case of emergency.
• Make sure that the voltage supply matches the specifications on the rating label before connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations.

Startup / Operation

Intended use The appliance is intended for use in private households.
The fridge is suitable for cooling perishable foods such as milk, dairy products, meat, fish, eggs, mar- garine, various spreads and fruit and vegetables that are not sensitive to cold.
The freezer is suitable for storing commercially frozen food, freezing fresh, room temperature food and making ice cubes.

Prior to first use
CAUTION:
After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown.

Clean the appliance interior including all accessory parts. Consider the instructions which we provide in the chapter “Cleaning and maintenance”.

Starting the appliance

• Connect the appliance to the power supply.
• Set the operating conditions. See also the following sections.

Operating overivew

– After connection to the power supply, all LEDs in the display initially light up for approx. 5s.
– The display goes out automatically as soon as the fridge doors are closed and no button is pressed within 15s.

Function buttons and description
Function
Use the function button to select one of three functions.
The LEDs indicate the selection:

↪ECO→Fast cooling→Fast freezing↩

OK
Press the confirmation button to confirm the temperature and function setting.
Confirm the setting with the confirmation button or wait about 5s without pressing a button, the setting is automatically accepted.
3s to unlock
Keep pressing the confirmation button for approx.
3s to unlock the buttons.
The active button lock prevents buttons being pressed carelessly or incorrect operation.
The button lock is automatically activated approximately 15s after the last button is pressed.
Fridge
The temperature button for the fridge allows you to regulate the internal temperature in the range from 2°C to 8°C or to switch off the cooling mode if re- quired. The display shows the selection:

↪5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃↩

OF means off state, and if the OF- setting is activated, the fridge operation is switched off.
CAUTION! Do not store any fresh or perishable food in the fridge when it is switched off!

Freezer
The temperature button for the freezer allows you to regulate the internal temperature in the range from -16°C to -24°C. The display shows the selection:

↪-18℃→-17℃→-16℃→-24℃→-23℃→ -22℃→-21°C→-20℃→-19℃↩

Care+
The temperature button for the fresh food drawer allows you to adjust the temperature mode within the drawer depending on the contents. The LEDs indi- cate the selection:

↪Vegetables→Fruits→Chill↩
The adjusted humidity and temperature in the respective mode have an optimum effect on the shelf life of the food.
Further information on the modes can be found under “Temperature zones and storage recommenda- tions”.
ATTENTION: If the refrigerator compartment is in the off state, the drawer also has no cooling function.

General information to the functions
– As soon as a function is active, the corresponding LED lights up continuously and goes out when it stops.
– When a function is active, it is not possible to set the fridge and/or freezer temperature (depending on the function).
If you press one of the temperature buttons for the first time, a signal tone sounds; if you press the button again, the active function is deactivated and the temperature can be set.
– If another function is selected, the previously active function is automatically terminated, except for fast cooling and fast freezing, these functions can be activated simultaneously.

ECO
The appliance is set to energy-saving mode.
The internal temperatures are automatically set to +5°C in the fridge and -18°C in the freezer and kept constant.
Select the function using the function button and confirm the selection.
Exit energy-saving mode in the same way.

Fast cooling / Fast freezing
When the fast cooling and/or fast freezing function is activated, the appliance operates at maximum power to speed up the cooling or freezing process.
The fast cooling function switches off automatically after 8 hours and the fast freezing function after 26 hours. The respective internal temperature ad- justs to the preset temperature.
Select the function using the function button and confirm the selection.
The functions can be terminated in the same way at any time before the switch- off times expire.

Alarm function
…when the appliance door is open
If the fridge doors remain open for longer than 3 minutes, a continuous alarm sounds until any button is pressed.
However, the alarm sounds again every 3 minutes until the fridge doors are finally closed correctly.

…when the temperature rises (only after a power failure)
If there is no power supply for a longer period of time, the internal temperature may rise. If this rises to around -10°C in the freezer, the corresponding LED and the temperature display flicker.
The current freezer temperature can be displayed by pressing any button. The normal display is restored 10s later or by pressing any button again.

Reminder function
In the event of a power failure, the appliance retains the operating status that was set before the power failure when the power supply is restored.

Switch-on delay
To protect the compressor from damage in the event of a short-term power failure (i.e. less than 5 minutes), the compressor is not started immediately after the appliance is switched on.

Settings
Basically, the temperature changes depending on the ambient temperature (installation location), the frequency of opening the door and the equipment.
For initial operation, first set the lowest possible internal temperature (= highest power level) or select the fast cooling or fast freezing function until the appliance has reached the desired operating temperature.
It is recommended to reset to a medium power level so that you can easily correct the temperature if necessary.
A high power level also increases energy consumption.

Interior light
When opening the fridge door, the interior light will turn on automatically.

Equipment
Note that the equipment varies depending on the appliance type.
The various shelves and drawers can be heightadjusted (partially and model- dependent) or removed for individual storage. Practical also for cleaning purposes.

**NOTE:**
For the most efficient use of energy, place all shelves/drawers in their original positions.

Removing / inserting the shelves

• To remove, open the unit door completely, lift the shelf, if necessary, slant slightly and pull it out to the front.
• Safely reinsert the shelf at the desired height and push it in until the stop is reached.

Removing / inserting the door racks

• To remove the door rack, press it upwards out of the retainer or, depending on the model, first press one side inwards until this side can be pulled out upwards.
• Place the door rack flat, press down both sides of the rack so that it locks into the retainer.

Removing / inserting the drawers

• To remove the drawer, pull it out to the front, in- cline it if necessary and remove it.
• Insert the drawer, if necessary, lift the front part of the drawer slightly and push it in completely.

Egg tray
Depending on the model, a tray for storing eggs is included with the appliances.
Ice cube tray
Depending on the model, an ice cube tray for making ice cubes is included with the appliance.

• Fill the ice cube tray about ¾ full of fresh drinking water. Then place the tray flat in the freezer for a few hours.
• To release the ice cubes from the tray more easily, you can briefly hold the tray under warm water.

Storing food
NOTE: Recommendation!
To guarantee that the temperature is low enough, you should pre-cool the appliance a few times before initial loading foods.
CAUTION:
Always pay attention to the storage instructions on the sales packaging.

To avoid contamination of food, respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems (see “Cleaning and maintenance”).
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice-cubes.
• One- , two- or three-star compartments are not suitable for the freezing of fresh food.
• If the appliance is out of use for long period, fol- low the instructions under “Switching off”.

Fridge
Always store food covered or packed to prevent drying-out and transfer of odor or taste onto other food items. You may pack the food with e.g.

• Polyethylene plastic bags or foil
• Plastic bowl with lid
• Special plastic covers with elastic strip
• Aluminum foil

Temperature zones and storage recommendations
The optimal cooling temperature is around 4∼7 degrees for the central area of the cooling.
Different cooling zones are created by the air circulation. Regardless of the power level, cold air drops off.

• The coldest zone is on the cooling rear wall and in the lower cooling part. Recommended for storing perishable foods such as meat, fish and sausages at around 2∼3 degrees. Be sure to pack food well or cover it appropriately.

• About that it becomes less cold. For dairy products such as yoghurt, cheese and co., the center of the cooling is just the right temperature at around 4∼7 degrees.

• Well-packed leftovers or preserves needs less cooling. The upper cooling part at around 6∼8 degrees could be the right place.

• The cooling door is one of the warmest locations.
  The upper racks are good location for food that needs moderate cooling, such as butter and eggs.
  There is space for drinks in the lower door racks.

• The vegetable box (depending on model) is suitable for fruit and vegetables at a temperature of around 8 degrees, depending on the cooling temperature.
  To make especially delicate fruits and vegetables feel comfortable, a glass shelf above the drawers retains the falling cold and prevents moisture loss.

• The fresh food drawer offers the perfect storage conditions for all fresh food thanks to special climate control and individual adjustment options.
  Adjust the mode depending on the contents.

Vegetables
Suitable for keeping vegetables, salad and numerous types of fruit fresh at a temperature of around 7°C with optimum humidity.

Fruits
To extend the fresh-keeping time at around 4°C.
Suitable for fruits like apples, pears, cherries, blueberries, strawberries, grapes, etc.
Chill
Suitable for fresh food such as fish, meat and sea- food at a temperature of just above 0°C.
For gentle defrosting of frozen food.
To ensure that sensitive fruit and vegetables in particular feel comfortable, a glass shelf above the drawer holds back the falling cold and prevents moisture loss.
Freezer
The 4-star freezer allows you to store frozen food at a temperature of -18°C or colder for several months; to prepare ice cubes and to freeze fresh food.

Freezing

• CAUTION, refer to the enclosed product data sheet for the maximum amount of food in kg that can be frozen in 24 hours. If the quantity is greater, the quality of the freezing and the already frozen food will be affected.
• Fresh food should be frozen as fast as possible to the core. During freezing operation, the temperature of fresh food should be lowered as fast as possible to keep formation of ice crystals as little as possible and not to damage the food structure.
• Keep a space between the individual items, so that the cold air can circulate.

Storing frozen food

• Packed frozen merchandise should be stored in accordance with the manufacturer’s data. Make sure the food items do not defrost after purchase and to store them as fast as possible in the freezer.
• It is possible to store food for longer periods of time. The period might vary, so observe the storage information on the packaging of the merchandise.

General safety precautions

• Do not store bottles or cans. These can break when the contents freeze – or even explode if they contain carbonated drinks.
• Once products have been defrosted halfway or completely, they should be consumed as soon as possible and should not be frozen again, except they have been processed to a ready meal.
• Do not eat food that is still frozen. Do not eat ice cream directly from the freezer. The cold can cause injuries in the oral cavity.
• Touching metal parts inside the unit can cause symptoms like burns if the skin is very sensitive.
• Never touch frozen food with moist or wet hands.

Packing frozen food
Always select packaging suitable for the food and pack it properly.

• Freeze in portions. Suitable for packaging are e.g. plastic films, polyethylene tubular films, aluminum foil, freezer cans.

• The packaging must be impermeable to air and moisture.
  – Press the air out of the package.
  – Seal the package tightly with e.g. rubber rings, plastic clips, twine or cold-resistant adhesive tapes.

• Label the package with contents and freezing date.

Storage times
The indicated storage times are guide values for the storage duration of various food groups in the freezer.

For commercial frozen products, the storage period indicated on the packaging is decisive.
Operating noise

Switching off
To switch off the appliance, disconnect it from the power supply.
If the appliance is out of use for long periods:

• Remove the appliance content.
• Defrost (model dependent) and clean the appliance thoroughly (see ”Cleaning and mainte- nance”).
• Leave open the appliance door to avoid formation of mold and unpleased odors.

Tips for Energy saving

• Disconnect the appliance from the power supply if it isn’t in use.
• Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
• Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
• Place all shelves, racks or drawers (depending on the model) in their original position.
• Adjust the temperature not colder than necessary.
• Allow warm food to cool before placing it in the appliance.
• Open the appliance door only as necessary.
• Defrost the unit regularly (model dependent).
• The seal of the appliance door must be completely intact, so that the door closes properly.
• Turn off the frame heating, see “Turn off the frame heating manually”.

Frame heating
The front sides of the housing are slightly heated to prevent condensation forming in the area of the door seal.

Turn off the frame heating manually
Keep pressing button combination Care+ and Fridge for about 3s to enter the “Special program working state” mode. The symbol [Sd] flickers on the display and 2s later, the current setting of the “Special program” will be displayed. Then press button combination Fridge and Freezer to switch the setting on, display shows [on]. The setting will be memorized if no button operation within 5s, and the current program gets exited to enter the normal programs.
Keep pressing the button combination Fridge and Function for about 3s to enter the heating on/off setting mode, which is on by default, display shows [on]. Then you can press the Fridge button to switch the setting between 1 (On) and 0 (Off).
When the state of the heating is set to be off, display shows [of], the anti- condensation function is disabled. This function will not be memorized, and the heating is in the on state when the system is powered on again.

Cleaning and maintenance

**WARNING:**

• Always disconnect the appliance from the power supply before cleaning and user maintenance.

• Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components.
  Risk of electric shock! Hot steam could damage the plastic parts.

• The unit must be dry before restarting operation.

**CAUTION:**

• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.

Cleaning the appliance including interior
To keep dirt and germs at bay, clean the appliance regularly!

• First clear out the contents of the appliance and store it in a cool place. Remove all moving parts such as shelves or drawers.
• Clean the interior of the appliance, the exterior surfaces and the accessories with lukewarm water and a mild cleaning agent; or with a clean, damp microfiber cloth without cleaning agent.
• After everything has dried thoroughly, you can put the appliance back into operation.
• Depending on the model: At least once a year, wipe off the dust that has accumulated on the rear wall of the unit and on the condenser (metal grille). Use a soft brush or a vacuum cleaner for this purpose.

Cleaning / replacing the door seal
Regularly check the seal for dirt, damage and air tightness!

Checking the seal for air tightness

• Clamp a thin piece of paper at various points for testing. The paper must be equally difficult to pull through at all points.

Cleaning the gasket

• Clean the gasket with clear water only!
• CAUTION, grease and oil makes the seal porous and brittle. Wipe up grease or oil immediately with a damp, clean cloth.

Replacing the seal

• Remove the contents of the appliance and, if necessary, defrost the unit. Pay attention to how the old gasket is attached. Most gaskets are only plugged in.
• Remove the worn gasket rubber by removing it from the groove. Carefully clean the appliance door and the groove below the rubber and remove any  adhesiveresidue.
• Attach the new rubber. If necessary, heat the rubber seal with a hair dryer or hot water and shape it by hand. Start pressing the gasket in one corner and then press it around the door into the groove provided for this purpose.
• Continue to check the seal regularly for dirt and damage!

Defrosting
The appliance remains ice-free thanks to the fully automatic NoFrost system. It continuously reduces the humidity and thus prevents the formation of ice. Manual defrosting is not necessary.

Changing the light
CAUTION:
Do NOT remove the cover of the light. The LED light may be replaced / repaired in case of failure / defect only by an authorized specialist.

Notes for the authorized specialist!

Lamp data: DC12V, max. 3 W
This product contains a light source of energy efficiency class G.

• Disconnect the appliance from the power supply!
• Carefully prise open the lamp cover with a flat- blade screwdriver and remove the cover.
• Remove the light strip from the holder, pull it out and disconnect the plug connection.
• Replace defective lamp and reassemble properly in reverse order.

Replacing the door hinge
If the appliance door starts to stutter, crack or jam when you open it, it is probably due to a worn or damaged hinge.
It is recommended to replace all door hinges at the same time, otherwise the next repair will soon be beckoning.

• Remove the contents of the appliance and the movable interior parts.
• Tilt the appliance backwards and block it in this position to prevent the door from sliding out.
• Dismount the upper hinge cover.
• Disconnect the two plug connections underneath (applies to the right-hand door hinge) and dismantle the upper door hinge.
• Remove the appliance door, place it safely aside and remove the lower door hinge.
• The respective hinge assembly is carried out in reverse order.
• Open and close the appliance door for a test run, readjust the hinges if necessary. In any case, make sure that the door fits tightly and accurately.

Troubleshooting

Before you contact an authorized specialist
The display shows error messages for some malfunctions!

Problem / Cause / Action
Appliance is not working properly or at all
– Check the power supply / temperature setting / ambient temperature.
– Unblock the ventilation openings, install the appliance freely.
Loading is too warm
– Check the temperature setting / ambient temperature.
– A large quantity of warm food has been stored in the unit in the last 24 hours.
– The appliance door is not closed properly, check the door seal.
Loud noise during operation
– Check that the appliance is level.
– See “Operating noise”.
Water on the appliance bottom
– Check the temperature setting.
Light does not work
– Check the power supply.
– See “Changing the light”.
Error codes: E0, E1, E2, Eb, EH, EC, EE
– An error has occurred, please contact a specialist.

**NOTE:**
If a problem persists after following the steps above, contact your trader or an authorized technician.

Technical data

Climate class SN/N/ST/T: this appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.

Electrical connection……………………………………..
Power voltage: …………………….220-240 V~ / 50 Hz
Rated defrosting power: …………..….…..…..…175 W
Rated current: …………………………..…..………1.3 A
Dimension H x W x D / Weight…..……………………..
Appliance size: ……..….………190.8 x 60.0 x 63.9 cm
Net weight: ……………………….……approx. 73.0 kg
For more information about the product, scan the QR code on the supplied energy label and/or visit the official website of the product data bank: https://eprel.ec.europa.eu

The right to make technical and design modifications during continuous product development remains reserved.
This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the “Dustbin” symbol
This symbol indicates that this product must not be disposed of with household waste in accordance with the Waste Electrical and Electronic Equipment Directive (2012/19/EU) and national legislation.
Improper handling of waste electrical and electronic equipment can have negative effects on the environment and human health due to potentially hazardous substances that are often contained in waste electrical and electronic equipment.
Consumers are legally obliged to dispose of electrical and electronic appliances separately from unsorted municipal waste at the end of their service life. By disposing of this product properly, you are also contributing to the effective utilization of natural resources.
Information on collection points for old appliances can be obtained from your local authority, the public waste disposal authority, an authorized body for the disposal of old electrical and electronic appliances oryour waste collection service.
This product must be returned to a designated collection point. This can be done, for example, by returning it when purchasing a similar product or by hand- ing it in at an authorized collection point for the recycling of old electrical and electronic equipment. The return of old appliances is free of charge. Your dealerand contractual partner is also obliged to take back the old appliance free of charge.
Before disposing of the product, remove all batteries and rechargeable batteries as well as all lamps that can be removed without destroying them.
Please note that you are responsible for deleting personal data from the product to be disposed of.

**WARNING:**
Remove or destroy any existing latches and bolt locks when you take the appliance out of operation or dispose of it.

C. Bomann GmbH
www.bomann-germany.de
Made in P.R.C.

References

• service.com is for sale | www.brandforce.com
• Bomann Startseite
• Bomann Startseite
• Bomann Service

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>