BOMANN HL 6064 CB Fan Heater Instruction Manual

BOMANN HL 6064 CB Fan Heater

Product Information

The HL 6064 CB is a space heater with a power output ranging from 1 kW to 2 kW. It has a temperature control knob, a handle for easy portability, and a function selector switch that allows you to choose between two heat settings or a fan-only mode. The heater also features a warning symbol to alert users of potential hazards. The product comes with a user manual, technical data sheet, and a warranty.

Product Usage Instructions

General Notes
Before using the product, ensure that all packaging materials (plastic bags, cardboard, styrofoam, etc.) are removed and disposed of properly. Keep the heater away from children to avoid accidents.

Operation

1. Place the heater on a flat, stable surface.
2. Plug the heater into an electrical outlet.
3. Turn the temperature control knob to your desired setting (0 for off, I for 1000 W, II for 2000 W).
4. Select the desired function using the function selector switch (heating or fan-only mode).
5. The heater will begin to warm up the surrounding area. Use caution when adjusting the temperature control knob as it may be hot to the touch.
6. To turn off the heater, turn the temperature control knob to 0 and unplug it from the electrical outlet.

Cleaning

Before cleaning the heater, ensure that it has been unplugged and has cooled down. Use a soft cloth or brush to remove any dust or dirt from the surface of the heater. Do not use water or cleaning agents on the heater.

Storage

When not in use, store the heater in a cool, dry place away from direct sunlight and moisture.

Disposal

Dispose of the product in accordance with local regulations. Do not dispose of the product with regular household waste.

This product is only suitable for well isolated rooms or for occasional use.
Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in this Instruction Manual
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the appliance:

• WARNING:
  This warns you of dangers to your health and indicates possible injury risks.

• CAUTION:
  This refers to possible hazards to the appliance or other objects.

• NOTE:
  This highlights tips and information.

General Notes
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you pass the appliance on to a third party, always include all the relevant documents.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
• Always switch off the appliance and pull the mains plug out of the socket (pull the mains plug, not the cable) when you are not using the appliance, attaching accessories, for cleaning or in the event of a fault.
• Do not operate the appliance without supervision. If you leave the room you should always turn the appliance off. Remove the plug from the socket.
• The appliance and the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• Do not repair the appliance by yourself. Always contact an authorized technician.
• Use only original spare parts.
• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

WARNING:
Do not allow small children to play with the plastic foil. There is a danger of suffocation!

Special Safety Precautions for this Appliance

You will find the following symbol with warning character on the appliance:

WARNING:
In order to avoid overheating, do not cover the heater.

WARNING: Risk of Burns!

• Some parts of the product can become very hot and cause burns. Avoid skin contact. Carry the appliance by the handle.
• Take special care when children and vulnerable persons are present.
• Do not place the heater immediately below a socket-outlet.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• Do not use this heater if it has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Use this heater on a horizontal and stable surface.
• Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
• To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1m from the air outlet.
• Children younger than 3 years of age should be kept away from the appliance, unless they are supervised at all times.
• Children from the age of 3 and younger than 8 years of age may only turn the appliance on and off if they are supervised, or have been instructed with regard to the safe use of the appliance, and if they have understood the risks resulting from it, provided that the appliance has been placed and installed in its normal position of use.
• Children from the age of 3 and younger than 8 years of age may not insert the plug into the socket, may not regulate the appliance, may not clean the appliance and/or may not perform the maintenance by the user.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Under no circumstances may the fan heater be used in rooms with explosive gas (e.g. petrol) or while work is being carried out with inflammable adhesives or solvents (e.g. when gluing or painting parquet, PVC etc.).
• Do not insert any objects into the fan heater.
• Ensure that a safety distance is maintained between the power cord and the housing.
• Do not use the fan heater in the open air.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling material, cable ties and cardboard packaging.
3. Check the appliance for possible transport damage to avoid hazards. Do not operate a damaged appliance. Return it to the dealer immediately

NOTE:
There may still be dust or production residues on the appliance. We recommend that you clean the appliance as described under “Cleaning”.

Overview of the Components

1. Temperature control

2. Handle

3.  Function control knob

4. On/Off switch for oscillation

5.  Stand

6. Safety switch

7. Grille for heating elements

8. Indicator lamp

Notes for Use
Safety Switch
Your fan heater features a safety switch that disconnects the power supply in case the appliance falls over. The safety switch prevents hazards caused by overheating.

WARNING:
Place the appliance on a smooth, horizontal and stable surface. Avoid carpets in order to prevent failure of the safety switch.

NOTE:
The appliance turns on automatically once back in an upright position.

Connected Load
The appliance supports a power input of 2000W.
CAUTION : Overload

• When using an extension cord, it must have a cable cross-section of at least 1.5mm².
• Do not use a multiple socket as this appliance is too powerful.
• Do not connect any other powerful devices to the same electric circuit.

Operation

Electric Connection

1. Make sure the voltage of the appliance (see rating label) matches the mains voltage to be used.
2. Set the function control knob to 0.
3. Unwind the mains cable completely.
4. Only connect the mains plug with a properly installed earthed socket.

Setting the Temperature
The thermostat constantly switches the fan heater on and off, thereby keeping the temperature at the desired level. Set the desired temperature as followed:

1.  Set the temperature control to its highest setting.

2. Once the desired temperature has been reached, slowly turn the temperature control back, until the fan heater switches off audibly. The indicator lamp turns off.
   NOTE:
   The audible position of the temperature control depends on the ambient temperature.

3. The fan heater will then keep the desired temperature level

CAUTION:
When not using the appliance, disconnect the mains plug.

Oscillation
To achieve even heating or ventilation, the appliance is additionally equipped with an oscillation function.
There is a switch on the back of the appliance to switch the oscillation mode on or off.

• 0 = Oscillation switched off
• I = Oscillation switched on

CAUTION:
Never adjust the swivel mechanism with your hand. The mechanism could be damaged.

Fan Operation
If you want to use the appliance as a fan, turn the function control knob to the fan icon and turn the temperature control to highest position.

End Operation
If you want to end the operation, set the function control knob to the position 0. The indicator lamp turns off. Then disconnect the mains plug from the socket.

Overheat Protection

The appliance features an overheat protection mechanism causing the appliance to switch off automatically in case of overheating.

1. Set the function control knob to position 0 and pull the mains plug out of the socket.
2. Let the appliance cool down for approx. 10 minutes before using it again.

NOTE:
If the overheat protection mechanism causes the appliance to switch off again after a short period, this might indicate a defect.

1. Switch off the appliance and disconnect it from the mains.
2. Have the appliance checked by your dealer or our customer service.

Cleaning

WARNING:

• Always unplug the appliance from the mains before cleaning and wait until the appliance has cooled down.

• Never immerse the appliance in water to clean it. This may lead to electrical shock or fire.
  CAUTION:

• Do not use wire brushes or other abrasive materials.

• Do not use caustic or scouring agents.

• Wipe away dust with a dry cloth.

• Flecks can be removed with a suitably damp cloth.

Dust on the Protective Grilles
Accumulation of dust on the protective grilles can lead to overheating.

• Remove the dust by careful brushing.
  or

• Use the upholstery nozzle of your vacuum cleaner to remove the dust.

Storage

• Let the appliance cool down before putting it away!
• Wind the mains cable loosely.
• We recommend storing the appliance in its original packaging if you do not intend to use it for a long period of time.
• Always store the appliance out of the reach of children in a well-ventilated and dry place.

Technical Data

• Model:…………………………………………………………HL 6064 CB
• Power supply:……………………………….220–240V~, 50–60Hz
• Power consumption: ……………………………………………2000W
• Protection class:………………………………………………………….
• Net weight: …………………………………………….. approx. 1.25kg

The right to make technical and design modifications in the course of continuous product development remains reserved.

Notice of Directive Conformity
The appliance meets the European standards and directives in the current version at delivery:

• Low Voltage Directive (LVD) 2014/35/EC
• Electromagnetic Compatibility (EMC) Legislation Directive 2014/30/EC
• RoHS-directive 2011/65/EU & (EU) 2015/863
• Ecodesign-directive (ErP) 2009/125/EC
• Commission Regulation (EU) 2015/1188 (Product Data Sheet see page 16)

Disposal

Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equipment in the domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of re-utilisation of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

Product Data Sheet

C. Bomann GmbH
Internet: www.bomann-germany.de
Made in P.R.C.

References

• Bomann Startseite

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>