GLOBAL V2.00 Digital Video Recorders User Guide
- May 15, 2024
- GLOBAL
Table of Contents
GLOBAL V2.00 Digital Video Recorders
Packing List
Contact your local dealer if the package is damaged or incomplete. The package contents may vary with the device model.
Remarks
means optional and supplied with certain models only.
Interfaces
The interface may vary with the device model
Disk Installation
The illustrations are for reference only. The actual device may vary.
Preparation
- Prepare a 1# or 2# Philips screwdriver, a pair of antistatic gloves or a wrist strap.
- Disconnect power before installation.
HDD Installation
- Loosen the four screws on the side panels, and remove the upper cover.
- Insert the screws (e.g., ①) into the disk (②) and tighten halfway.
- Slide the screws in the holes on the chassis bottom from A to B as illustrated and then tighten.
- Tighten two other screws to fasten the hard disk.
- Put the cover back in place and tighten the screws.
Startup and Shutdown
Check that the cables are connected correctly, the device is grounded
properly, and the power supply meets requirements.
Startup
Connect the device to power to start up the device.
Shutdown
Go to the live view page, right-click, and then choose Shutdown in the
shortcut menu.
CAUTION!
Do not disconnect power when the device is operating or shutting down.
Local Operations
Add IP Camera
Make sure the IP camera to add is connected to the network.
- Right-click on the live view page, and click Camera > Camera > Camera.
- Click Custom Add, and enter the IP address and other required information.
- Check camera status
- If the icon is highlighted, it means the camera is online.
- If the icon is greyed out, point to the icon to view failure information. Click the edit button to modify device information.
NOTE!
- You can also click to add a device.
- To search for devices in a specified network segment, click Search Segment.
Recording and Playback
Recording
A 24/7 recording schedule is enabled by default. To modify the recording
schedule, go to Menu > Storage > Recording Schedule, and then set the
recording type and time as needed.
Playback
In the live view page, right-click a preview window and select Playback to
play the recording of the current day.
NOTE!
If you choose the Event recording type, you need to enable the corresponding
alarm function and configure alarm-triggered recording first.
Web Login
Before you begin, check that your PC is connected to your DVR through the
network. Open the browser on your PC, enter the IP address (default is
192.168.1.30) in the address bar, and then press Enter.
NOTE!
You may need to install the plugin at your first login. Close all the web
browsers before the installation starts. In the login page, enter the username
(admin) and password (123456), then click Login.
Disclaimer and Safety Warnings
Copyright Statement 2022-2023 Zhejiang Uniview Technologies Co., Ltd. All
rights reserved. No part of this manual may be copied, reproduced, translated
or distributed in any form or by any means without prior consent in writing
from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us
hereafter). The product described in this manual may contain proprietary
software owned by Uniview and its possible licensors. Unless permitted by
Uniview and its licensors, no one is allowed to copy, distribute, modify,
abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer,
or sublicense the software in any form or by any means.
Trademark Acknowledgements
are trademarks or registered trademarks of Uniview. The terms HDMI, HDMI High-
Definition Multimedia Interface, HDMI trade dress and HDMI Logos are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. All
other trademarks, products, services and companies in this manual or the
product described in this manual are the property of their respective owners.
Export Compliance Statement
Uniview complies with applicable export control laws and regulations
worldwide, including those of the People’s Republic of China and the United
States, and abides by relevant regulations relating to the export, re-export
and transfer of hardware, software and technology. Regarding the product
described in this manual, Uniview asks you to fully understand and strictly
abide by the applicable export laws and regulations worldwide.
EU Authorised Representative
UNV Technology EUROPE B.V. Room 2945,3rd Floor,Randstad 21-05 G,1314
BD,Almere,Netherlands.
Privacy Protection Reminder
Uniview complies with appropriate privacy protection laws and is committed to
protecting user privacy. You may want to read our full privacy policy on our
website and get to know the ways we process your personal information. Please
be aware, that using the product described in this manual may involve the
collection of personal information such as face, fingerprint, license plate
number, email, phone number, and GPS. Please abide by your local laws and
regulations while using the product.
About This Manual
- This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product.
- This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.
- Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot be held responsible for any such errors and reserves the right to change the manual without prior notice.
- Users are fully responsible for the damages and losses that arise due to improper operation.
- Uniview reserves the right to change any information in this manual without any prior notice or indication.
- Due to such reasons as product version upgrades or regulatory requirements of relevant regions, this manual will be periodically updated.
Disclaimer of Liability
- The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purposes, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
- To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.
- Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attacks, hacking, and viruses.
- Uniview strongly recommends that users take all necessary measures to enhance the protection of network, device, data and personal information. Uniview disclaims any liability related thereto but will readily provide necessary security-related support.
- To the extent not prohibited by applicable law, in no event will Uniview and its employees, licensors, subsidiary, and affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however, caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if Uniview has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).
Network Security
- Please take all necessary measures to enhance network security for your device.
- The following are necessary measures for the network security of your device:
- Change the default password and set a strong password: You are strongly recommended to change the default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters.
- Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security.
- Visit Uniview’s official website or contact your local dealer for the latest firmware.
- The following are recommendations for enhancing the network security of your device:
- Change the password regularly: Change your device password regularly and keep the password safe. Make sure only the authorized user can log in to the device.
- Enable HTTPS/SSL: Use an SSL certificate to encrypt HTTP communications and ensure data security.
- Enable IP address filtering: Allow access only from the specified IP addresses.
- Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT.
- Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access.
- Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked.
- Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions.
- Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risk of data leakage.
- Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router.
- Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network.
- Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.
- Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
- SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
Learn More
You may also obtain security information under the Security Response Center at
Uniview’s official website.
Safety Warnings
The device must be installed, serviced and maintained by a trained
professional with the necessary safety knowledge and skills. Before you start
using the device, please read through this guide carefully and make sure all
applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
- Store or use the device in a proper environment that meets environmental requirements, including but not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
- Make sure the device is securely installed or placed on a flat surface to prevent falling.
- Unless otherwise specified, do not stack devices.
- Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.
- Protect the device from the liquid of any kind.
- Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices.
- Verify that the device is properly installed before connecting it to power.
- Do not remove the seal from the device body without consulting Uniview first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.
- Always disconnect the device from power before attempting to move the device.
- Take proper waterproof measures by requirements before using the device outdoors.
Power Requirements
- Install and use the device in strict accordance with your local electrical safety regulations.
- Use a UL-certified power supply that meets LPS requirements if an adapter is used.
- Use the recommended cordset (power cord) by the specified ratings.
- Only use the power adapter supplied with your device.
- Use a mains socket outlet with a protective earthing (grounding) connection.
- Ground your device properly if the device is intended to be grounded.
Battery Use Caution
- When the battery is used, avoid:
- Extremely high or low temperature and air pressure during use, storage and transportation. Battery replacement.
- Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.
- Replace the battery with an incorrect type;
- Dispose of a battery in a fire or a hot oven, or mechanically crushing or cutting a battery;
- Dispose of the used battery according to your local regulations or the battery manufacturer’s instructions.
Personal safety warnings
- Chemical Burn Hazard. This product contains a coin cell battery.
- Do NOT ingest the battery.
- It can cause severe internal burns and lead to death.
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Regulatory Compliance
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Visit
http://en.uniview.com/Support/Download_Center/Product_Installation/Declaration/
for SDoC.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used by the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own expense.
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU and
EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of responsibly.
Battery Directive-2013/56/EC
The battery in the product complies with the European Battery Directive
2013/56/EC. For proper recycling, return the battery to your supplier or a
designated collection point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>