Heath Zenith 18000088 Wired Doorbell Chime User Manual

Heath Zenith 18000088 Wired Doorbell Chime User Manual

SAFETY INFORMATION

• Please mac and understand this entre manual before attemptna to assent:at wry ot operate this doorbell a ‘re
• M electrical wort must he In accordance 021 oaaunal and ►ca electrical codes II in doubt, consult a quiailkicl electrician
• This doorbell chime requires an /I to 16 volt AC, 10VA transtorr er (not inctuteci). • This doorbell chime requites a low voitiot electrical COnnectkrr Do corned directly le 120V AC.

PACKAGE CONTENTS AND SPECIFICATIONS

I NSTALLAT1ON 1 Vt FIPYING

ItrE IRANSORMER POWER WNG A WAN/N0 rhos (barbell chime replays s ab low ‘Aar GOnliPCbill DO mul connect &way to 120v AC
16 von AC Iranslonrier with a 10 nett or greater rain

2. RLNICVNG DIE EXISTING DOORBELL OM

Remove the cow from the existmg Martel chirre ana Label as wires with missions tape before Oisccnlecling “F’ Front door doorbell buttcri w.ve -1” – Transformer Wire -Ft- Rear door Oonthell tiotor wwe pf apOcabiel Disconnect al wires from Ine existrig &vibe° chime and remove the ilevelel chops Prom mouinting surface.

3 IVIOUN’ It4G 1s= DOORBELL CHIME BASE

Routs tow grecs through the wire entrance nolo n w ororbell chime base Using vw arrow indicator, place the dcrobell ogre base agairts1 the well ame mark the twv. screw hole location. 0n11 two 7:32 i. allot ncies and insert Vial I arChort AttaCti Eirxxtell chime base to dte rr•ounInig surface using the two screws and *emir mutely

4 Vol RING THE DOORBELL

Connect els or,orbell wires lc VW ciciorbe chime base Wire sz-rew terminal •FROeil” Wire screw terminal ‘TRANS” Wire 13 screw terminal “REAR Press int ocw)rsacl &roe cover Otto lie tinorbell ham
fOTE. io rINTOUW! 1.*! :•`4′ 4:veer aft?! Aroleili dame base s elkAr2.: rt^TVI.’ craSp drortra,’ cfvne COW SOO AA

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>