BROCK Electronics HBS 6001 Hand Blender Set User Manual

: June 4, 2024
: BROCK Electronics

Table of Contents

BROCK Electronics HBS 6001 Hand Blender Set
SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
PRODUCT DESCRIPTION
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
OPERATING THE APPLIANCE
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
Warranty card
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BROCK Electronics HBS 6001 Hand Blender Set

BROCK-Electronics-HBS-6001-Hand-Blender-Set-featured

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE

READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let cord hang over edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
The exchange of accessories may only be carried out with the device switched off.
The blades are very sharp. The highest caution is offered. Before replacing the mixers, unplug the power cord from the wall outlet.
Only use original accessories that are included in the scope of supply.
Do not cover the ventilation openings in the housing during operation.
For washing the case, do not use any heavy cleaning agents because they can be used to remove graphical information symbols, e.g. Signs, warning photograms, etc.
Never use the appliance for hot oil or grease (hot products).
Never touch with wet hands.
The appliance is not intended for crushing ice, bone and other hard products or for grinding nuts and coffee.
During the mixing process, never place your hands or cutlery into the container.
Observe the maximum uninterrupted operating time of the unit of 50 seconds. After the continuous operating time of 50 seconds, wait 4 minutes before turning the unit back on. Exceeding the operating time of the appliance and the absence of sufficient breaks can lead to irreversible engine damage.
When the appliance is aged, unplug it from the mains before cleaning.
Before first use, wash thoroughly and dry the appliance (see: Cleaning and maintenance).

PRODUCT DESCRIPTION

BROCK-Electronics-HBS-6001-Hand-Blender-Set-fig-1

A – 1Speed /2Speed Button
B – Motor Part
C – Stainless Blender leg
D – Whisk gearbox
E – Whisk
F – Mini chopper gearbox
G – Mini chopper blade
H – Mini chopper bowl, 500 ml
I – Beaker, 700 ml

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

Before you start assembling or disassembling the appliance, check that the motor unit is turned off and disconnected from the power socket and that the rotating parts have come to a complete stop.

Stick blender
Attach the slick blender attachment from underneath to the motor unit. The connection of both parts is indicated by a click. For blending, use the beaker or another suitable container intended for coming into contact with food. The anti-slip base pad also serves as a lid for the beaker, when you wish to use it for short-term storage of food.

Chopper
Place the bowl on an even, dry and stable surface, and seat the blade assembly onto the central pin at the bottom of the bowl. Close the bowl using the lid, whilst ensuring that the blade assembly shaft fits into the middle part of the lid and that the safety locks along the sides of the lid slide into the safety system of the bowl. Turn the lid clockwise all the way. This will secure it in place and is indicated by a click.

Hand mixer
Slide the whisk, into the holder, until it clicks in. Before use, always check that the whisk is securely attached. Attach the holder with the whisk from underneath to the motor unit. The attachment is indicated by a click.

OPERATING THE APPLIANCE

Select the type of accessories that you wish to use and assemble the appliance according to the instructions in the chapter Assembling and disassembling the appliance.
Attention: When assembling the chopper, place the food into the bowl only after placing the blade assembly onto the central pin at the bottom of the bowl. Do not fill the bowl over the maximum mark.

First cut the food that will be placed into the chopper bowl into small cubes measuring approximately 2 × 2 cm. With vegetables like onions, it is sufficient to cut them into quarters. To prevent food from squirting out when using the stick blender or the whisks, hold the attachment submerged while the appliance is running.

Attention:
The maximum continuous operating time of the appliance is 1 minute. Then allow it to cool down for 3 minutes. When using the appliance to hard foodstuffs, interrupt operation already after 15 seconds. Then allow it to cool down for 1 minute. After three consecutive cycles, allow the appliance to cool down for 15 minutes. After you finish using it, disconnect the power cord from the power socket. Make sure that the rotating parts have stopped rotating, and disassemble the appliance into its individual parts.

CLEANING AND MAINTENANCE

Before cleaning it, make sure that the appliance is turned off, disconnected from the power socket and that the rotating parts have stopped. Disassemble the appliance into its individual parts. Thoroughly wash the used accessories using warm water and neutral kitchen detergent. Then rinse them with clean water and allow them to dry naturally or dry them out thoroughly using a wiping cloth. Take care that water does not enter into these parts. When cleaning the removable attachment of the stick blender, do not submerge the top end that connects to the motor unit.

After finishing using the stick blender, it is possible to clean the stick blender blade assembly by submerging it in warm water with kitchen detergent and running it for a short time. Then disconnect the appliance from the power socket, disassemble it, and rinse the blade assembly with clean drinking water and dry it thoroughly. To clean the outer surface of the motor unit, use a cloth lightly dampened in a weak detergent solution. After applying the detergent solution, wipe the surface with a cloth lightly dampened in clean water and then wipe dry. Never submerge the motor unit or the power cord in water or in any other liquid. Do not use solvents, cleaning products with an abrasive effect, etc. for cleaning the appliance. Otherwise, the surface coat of the appliance may be damaged.

TECHNICAL SPECIFICATIONS

Related voltage …………………………………………………………………………………………… 220-240 V
Related frequency ……………………………………………………………………………………… 50/60 Hz
Related power ……………………………………………………………………………………………. 300 W

INFORMATION FOR USERS FOR THE USE OF ELECTRICAL AND ELECTRONIC DEVICES
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

This product meets all the basic requirements of EU directives related to it.

The owner of the trademark “BROCK Electronics” is GTCL Baltic LTD