qi2 G220 Magnetic Wireless Charger Instruction Manual
- September 26, 2024
- Qi2
Table of Contents
- G220 Magnetic Wireless Charger
- Specifications
- Product Usage Instructions
- 1. Connecting the Charger
- 2. Maximum Output and Power Adapter
- 3. Proper Connection
- 4. Avoid Interference
- 5. Temperature Consideration
- Q: What should I do if my device is not charging with the
- Q: Can I use any power adapter with the magnetic wireless
G220 Magnetic Wireless Charger
Specifications
- Product Name: G220 Magnetic Wireless Charger
- Charging Area: 80x80mm
- Power Supply: TYPE-C
- Maximum Output: Up to 15W
Product Usage Instructions
1. Connecting the Charger
It is recommended to use a PD adapter to connect the Type-C
port. When using the PD adapter, ensure the default input of the
product is 9V.
2. Maximum Output and Power Adapter
The maximum output of the magnetic wireless charger is 15W. To
optimize charging speed, use a power adapter with a rating of more
than 18W.
3. Proper Connection
Fully plug the Type-C power plug into the port to ensure the
product charges your device correctly.
4. Avoid Interference
Avoid placing foreign metal objects in the Phone charging area
to prevent interference with the charging process.
5. Temperature Consideration
Maintain a temperature below 28°C to prevent adverse effects on
charging speed.
FAQ
Q: What should I do if my device is not charging with the
magnetic wireless charger?
A: Ensure that the Type-C power plug is fully inserted into the
port and that there are no foreign metal objects in the charging
area. Also, check the temperature to make sure it is below 28°C for
optimal charging speed.
Q: Can I use any power adapter with the magnetic wireless
charger?
A: It is recommended to use a power adapter with a rating of
more than 18W to avoid affecting the charging speed.
G220
Magnetic Wireless Charger
G220 80x80mm
Magnetic wireless charging area for Phone. Power supply: TYPE-C.
2.1 It’s recommended to use the PD adapter to connect Type-C port (When using the PD adapter, The default input of the product is 9V ).
Magnetic Wireless Charger
G220
4.1 The maximum output of the magnetic wireless charger can be up to 15W, it
is recommended to use more than 18W power adapter to avoid affecting the
charging speed.
4.2 Please fully plug the Type-C power plug into the port to prevent the
product from not charging.
4.3 Please don’t put foreign metal objects in the Phone charging area to
prevent the product from charging.
4.4 It is recommended that the temperature not exceed 28 , affecting the
charging speed.
5. FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: – Reorient or relocate the receiving antenna. – Increase
the separation between the equipment and receiver. – Connect the equipment
into an outlet on a circuit different from that to which the
receiver is connected. – Consult the dealer or an experienced radio/TV
technician for help. FCC RF exposure statement: The equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance between 20cm
the radiator your body.
EN-4
JOIN OUR VIP CLUB NOW!
SCAN ME WITH YOUR PHONE’S CAMERA APP Contact us for a FREE Lifetime Warranty!
NOT HAPPY WITH YOUR PRODUCT? WE’LL MAKE IT RIGHT! JUST EMAIL US AT
support@oandys.com
www.oandys.com EN-5