UTILITECH MXW1003-LED6K9027 12 In Plug-In LED Undercabinet Light Instruction Manual
- June 12, 2024
- UtiliTech
Table of Contents
ITEM #5042288
12 IN PLUG-IN LED
UNDERCABINET LIGHT
UTILITECH and logo design are trademarks or registered trademarks of LF, LLC.
All rights reserved.
Thank you for purchasing this Utilitech product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
TOOLS REQUIRED (NOT INCLUDED):
FEELING CONFIDENT? START YOUR NEXT PROJECT
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Fixture does not light. | 1) Power is off. |
- Incorrect wire connection.
- Defective wall switch.| 1) Check circuit breaker or wall switch.
- Check wire splices.
- Replace wall switch.
CARE AND MAINTENANCE
Ensure power is off before cleaning. Clean with a mild glass cleaner and soft cloth. Apply liquid cleaner to cloth. Do not spra Do not attempt to replace LEDs.
WARRANTY
This fixture is warranted to be free from defects in materials and workmanship for three (3) years from the date of original purchase. Call 866-994-4148 to obtain a Return Authorization number and further instructions. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury which is caused by the product.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
- This product CANNOT be used with a dimmer switch.
CAUTION
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.. - This fixture wattage is 6 watts.The maximum distance to the receptacle is determined by the length of cord provided.
- Consult a qualified electrician to ensure correct branch circuit conductor.
To reduce the risk of fire, electric shock, or injury to persons:
a) Use only insulated staples or plastic ties to secure cords;
b) Route and secure cords so that they will not be pinched or damaged when the
cabinet is pushed to the wall;
c) Position the portable cabinet light with respect to the cabinet so the lamp
replacement markings are able to be read during relamping;
d) Not intended for recessed installation in ceilings, or soffits; and
e) The National Electrical Code (NEC) does not permit cords to be concealed
where damage to insulation may go unnoticed. To prevent fire danger, do not
run cord behind walls, ceilings, soffits, or cabinets where it may be
inaccessible for examination. Cords should be visually examined periodically
and immediately replaced when any damage is noted.
IMPORTANT SAFETY INSTRUCTIONS:
- This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
- To prevent electric shot, match wide blade of plug to wide slot.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Install
the metal scraps (CC) at a certain distance as your need.
If the installation surface is made of wood or other soft surface, do not
install plastic expansion (BB). 
Select desired color temperature and
wattage.
Insert
the lighting into the metal scraps. 
A single installation only needs to be
plugged in.Remove
the silicone stopper next to the switch if installed in series./Retire el tope
de silicona junto al interruptor si está instalado en serie.
This fixture links up to 8 units (with max 50 Watts). Use the rubber cap to cover the end of the fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>