MeloAudio S12 Open Ear Headphones Instruction Manual
- June 13, 2024
- MeloAudio
Table of Contents
S12 Open Ear Headphones
Instruction Manual
S12
OPEN-EAR HEADPHONES
INSTRUCTIONS MANUAL
Packing List
Product Schematic Description
- Multi-function buttons
- Indicator
- Magnetic Charging
- Memory silicone
- Multi-function buttons
- Digital Display
- Charging port
- USB output
Product operating instructions
Power on
Method 1: Open the charging case,the headphones will turn on automatically.
Method 2: Long touch the MF button of the headphones for 3s to turn on
theheadphones.
Power off Method 1: Put the headphones into the charging case ande close
the cover. Method 2: When the headphones is not connected to the Bluetooth
device long touch the ME button of the headphones for Ss to turn off the
headphones. Method 3: After disconnected from the Bluetooth device for 3
minutes.
Pairing
Step one: Open the charging case, the headpnones will start pairging
automatically.
Step two: Search and click for MeloAudio S12″ on the Bluetooth list ofthe
smart device.
Operation
( Restore factory settings ) When not connected to the phone, four clicks on the headphones (both left and right operations are required) will automatically shut down after the four clicks take effect, completing the reset. Then, put the headphones into the charging compartment and take them out to pair again.
Wearing Guide
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC ID: 2BA20-S12
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>