RENOGY 441R300PHX Phoenix 300 Power Station User Guide

441R300PHX Phoenix 300 Power Station
User Guide

IMPORTANT SAFETY INSTRUCTIONS

Please read the User Guide carefully before recharging or operating your Phoenix 300.

IMPORTANT SYMBOLS

| Indicates potentially dangerous conditions that could result in personal injury
---|---
| Indicates conditions or practices that could result in damages to the unit or other equipment
| Indicates procedures or functions that are important for the proper and safe operation of the unit and/or other equipment
| DO NOT submerge the unit in water or operate the unit in the rain. Doing so may cause short-circuits, electric shocks, and/or fire.
| DO NOT place the unit near the fire and/or heat the unit. Doing so may cause irreversible damages
to the unit and/or battery explosion.
| DO NOT overload the AC or DC outputs. Please check the specifications of output ports and devices before operation.
| Please dispose of the product according to the local recycling and environmental regulations.
| Please turn off the output ports when no devices are connected to the unit to prevent electric shocks.
| DO NOT dismantle or modify the unit. Doing so may cause irreversible damages to the unit and
void the warranty.
| DO NOT drop or strike the unit. Doing so may cause circuit failures and cracks in the casing.
| Keep the unit out of the reach of young children.
| DO NOT place the unit under direct sunlight or place it in high-temperature situations. Doing so
may cause unit malfunction or component degradation.
| DO NOT expose the unit to strong electrostatic fields, strong magnetic fields, and/or radiation.
| Please check the unit before each use. Stop using the unit if you notice unusual smells, heating,
distortion, or any other abnormalities.

FEATURES

REVOLUTIONARY SPEED
The PHOENIX 300’s USB-C port features Power Delivery (PD) technology that can pump out up to 60W power to compatible devices. Quick Charge (QC) technology allows for up to 18W of output power from the USB-A port.

VERSATILE POWERING OPTIONS
The PHOENIX 300 is equipped with multiple commonly used output ports to power essential gadgets and small appliances, while a D-Tap port is at the ready for your photography and videography equipment.

PURE SINE WAVE
Produce clean, silent, and stable AC power up to 200W with the pure sine wave inverter to power delicate electronic devices efficiently and safely.

ULTIMATE SAFETY
The battery management system (BMS) commands voltage control, temperature control, short circuit protection, and overcurrent protection to keep both the power station and your devices safe from damage.

PACKAGE CONTENTS

• 1 x Renogy PHOENIX 300 Power Station
• 1 x USB-A to USB-C Cable
• 1 x USB-C to USB-C Cable
• 1 x Solar Panel Connectors to 5.5mm DC Adapter Cable
• 1 x AC/DC Adapter
• 1 x User Guide

PRODUCT OVERVIEW

SPECIFICATIONS

General

Dimension| 181 x 155 x 143 mm / 7.1 x 6.1 x 5.6 in.
Weight| 2.9 kg / 6.4 lb.
Material| PC + ABS
Flashlight| 2 x 1.6W LED
Normal Operating Temperature| 0-40 ℃ / 32-104 ℉
Storage Temperature| 0-45 ℃ / 32-113 ℃
Operating / Storage Humidity| 45-95%
Certifications| FCC, CE, PSE, RoHS
Battery
Type| Lithium-ion Battery
Voltage| 14.4V
Capacity| 23400mAh / 337Wh
Cycle Life| 1000 Cycles to 80% Capacity
Input
DC Input Port| 12-25V, 50W Max
USB-C PD Port| 5-20V, 60W Max
Total| 110W Max
Output
QC USB-A Port| 3.6-6V / 3A, 6.5-9V / 2A, 9-12V / 1.5A, 18W Max
USB-A Port (2)| 5V / 2.4A Each, 3.4A Total Max
USB-C PD Port| 5-20V, 60W Max
CIG Port| 11-17V / 10A Max
D-Tap Port| 11-17V / 10A Max
AC Outlet (2)| 110V / 60Hz (US, JP, CA)
220V / 50Hz (AU, EU, CN)
200W Rated, 350W Surge
Pure Sine Wave
Total Continuous Output| 300W Max

BATTERY LEVEL LED INDICATORS

• Four Battery Level LED Indicators to indicate the battery level of the PHOENIX 300, approximating 25% – 50% – 75% – 100% capacity.
• As you use your PHOENIX 300 to power other devices, the Battery Level LED Indicators will go out one by one to indicate the remaining battery capacity.
• When the battery level of PHOENIX 300 is lower than 15%, the last Battery Level LED Indicator will flash twice per second.
• When recharging your PHOENIX 300, one of the Battery Level LED Indicators will flash. The flashing LED indicates the unit’s current battery level. Once your  PHOENIX 300 is fully recharged, all Battery Level LED Indicators will be lit and remain solid.

If the Battery Level LED Indicators to flash in an unusual way, your PHOENIX 300 may need special attention. Please refer to the TROUBLESHOOTING section for help.

RECHARGING YOUR PHOENIX 300

To maximize battery life, be sure to fully recharge your PHOENIX 300 before operating or storing it.

To shorten the recharge time of PHOENIX 300, it is recommended to disconnect all loads while recharging the unit.

Recharge Time
Recharge via Solar : 8 Hours
Recharge via AC/DC Adapter: 8 Hours
Recharge via USB-C PD Wall Charger: 6 Hours
Recharge via both AC/DC Adapter and USB-C PD Wall Charger: 3.5 Hours

The above recharge times are based on conditions when the PHOENIX 300 is recharged at full speed with no loads connected to it.

Recharging via Solar

• For optimal recharging performance, it is strongly recommended to recharge your PHOENIX 300 using a compatible solar panel (not included) on bright sunny days free of scattered clouds.
• Place the solar panel under direct sunlight. Steer clear of trees or branches that can shade the solar panel and slow down the recharging process.
• Use the included Solar Panel Connectors to DC Adapter Cable to connect the solar panel to the DC Input Port of your PHOENIX 300 and place your PHOENIX 300 in the shade to prevent it from overheating.
• The PHOENIX 300 will begin to recharge automatically and one of the Battery Level LED Indicators will flash.
  The flashing LED indicates the unit’s current battery level.

Compatible Solar Panels:
Renogy Monocrystalline Solar Panel: 50W, 80W, 100W
Renogy Polycrystalline Solar Panel: 50W, 100W
Renogy ECLIPSE Series Solar Panel: 100W
Renogy Monocrystalline Foldable Solar Suitcase w/o Controller: 100W
Renogy ECLIPSE Series Foldable Solar Suitcase w/o Controller: 100W
Renogy Flexible Solar Panel: 50W, 100W
Renogy E.FLEX Series Portable Solar Panel: 50W

Electrical shock can occur if the Solar Panel Connectors to DC Adapter Cable is damaged or frayed. DO NOT use a damaged or frayed cable to recharge your PHOENIX 300.
Make sure the open circuit voltage of the solar panel does not exceed 25V or fall short of 12V.
The solar recharge time is highly dependent on solar irradiance and ambient temperature.

Recharging via AC/DC Adapter
Plug your PHOENIX 300 into a wall outlet through the DC Input Port using the included AC/DC Adapter.
The PHOENIX 300 will begin to recharge automatically and one of the Battery Level LED Indicators will flash.
The flashing LED indicates the unit’s current battery level.

Electrical shock can occur if the power supply cable of the AC/DC Adapter is damaged or frayed.
DO NOT use a damaged or frayed cable to recharge your PHOENIX 300

Recharging via USB-C PD Wall Charger

• Connect the USB-C PD Port of your PHOENIX 300 to a USB wall charger (not included) using the included USB-A to USB-C Cable or USB-C to USB-C Cable and plug the  USB wall charger into a wall outlet.

• The PHOENIX 300 will begin to recharge automatically and one of the Battery Level LED Indicators will flash.
  The flashing LED indicates the unit’s current battery level.

• The PHOENIX 300 is designed to be recharged via either a USB-C wall charger or a USB-A wall charger.
  However, for optimal recharging performance, it is highly recommended to recharge your PHOENIX 300 using a USB-C PD wall charger (not included) with a high power rating.

Recommended USB Wall Chargers:

• Apple USB-C Power Adapter: 30W, 61W, 87W, 96W
• Google USB-C Power Adapter: 45W

Electrical shock can occur if the USB wall charger is damaged. DO NOT use a damaged USB wall charger to recharge your PHOENIX 300.

OPERATING YOUR PHOENIX 300

Operating your PHOENIX 300 at high temperatures above 104℉ (40℃) or at low temperatures below 32℉ (0℃) can result in battery performance degradation and service life-shortening. For optimal battery performance and maximum battery life, it is strongly recommended to operate your PHOENIX 300 at room temperature.

Operation Time

Battery Powered Devices:

Number of Full Charges =| 67,392mAh x 0.95
The Battery Capacity of the Device (mAh)
DC Powered Devices:
Working Hours =| 337Wh x 0.95
The Rated Power of Device (W)
AC Powered Devices:
Working Hours =| 337Wh x 0.85
The Rated Power of Device (W)

The above estimation formulas only apply when the PHOENIX 300 has been fully recharged and the device does not draw too much power.
An actual number of full charges and working hours may vary from different powering methods and device operation status.

Powering Your Devices

• Four Port Status LED Indicators respectively display the status of the AC Outlets, D-Tap Port and CIG Port, USB-C PD Port, as well as QC USB-A Port and USB-A Ports.
• To use the CIG Port, D-Tap Port, and AC Outlets, first press the corresponding Port On/Off Button to turn on the port. The corresponding Port Status LED Indicator will illuminate. Then, connect your device to the port for power. When not using the port, long press the corresponding Port On/Off Button to turn it off and the corresponding Port Status LED Indicator will go out.
• To use the USB-A Ports and QC USB-A Port, directly connect your device to the port. The PHOENIX 300 will begin to power your device automatically with the corresponding Port Status LED Indicator illuminating. When not using the port, long press the corresponding Port On/Off Button to turn it off and the corresponding  Port Status LED Indicator will go out.
• To use the USB-C PD Port, directly connect your device to the port. The PHOENIX 300 will begin to power your device automatically with the corresponding Port Status  LED Indicator illuminating. When not using the port, disconnect your device from the port and the corresponding Port Status LED Indicator will go out.
• When no device is connected to the PHOENIX 300, press the Main Power Button to turn it off to conserve energy.
• When the battery level of PHOENIX 300 is lower than 10%, the use of the AC Outlets will be automatically disabled. Please use DC outputs to continue powering your devices.
• When the battery voltage is excessively low, all the outputs will be cut off automatically. See TROUBLESHOOTING for more details.

Compatible Devices:

• USB-A Ports / QC USB-A Port: Smart Watch, Electronic Book, Smart Phone, Tablet, Action Camera, Digital Camera, Bluetooth Speaker, Wireless Headphone, Drone, and other USB-enabled devices.
• USB-C PD Port: Smart Phone, Tablet, Laptop, Handheld Gaming Console, DSLR Camera, and other USB-C enabled devices.
• CIG Port: Portable Refrigerator, Car Vacuum, Car Air Fan, CPAP Machine, and other car-powered devices.
• D-Tap Port: DSLR Camera, Camcorder, Digital Cinema Camera, LED Light, and other photography or videography equipment.
• AC Outlets: Laptop, Monitor, TV, Game Console, Inkjet Printer, Portable Projector, Light Bulb, and other AC-powered devices.

The PHOENIX 300 can provide up to 300W total continuous output. Allocate the outputs rationally and follow the specifications of each output port. DO NOT overload your PHOENIX 300.
Battery high-temperature protection may be triggered when the PHOENIX 300 is operating at full load. When this is the case, cool down the unit before resuming operation.  See TROUBLESHOOTING for more details.
When using the AC outlets of your PHOENIX 300, keep 4 inches of space on either side of the unit to guarantee efficient heat dissipation of the inverter.
If any of the Ports Status LED Indicators flashes in an unusual way, your PHOENIX 300 may need special attention. See TROUBLESHOOTING for help.
Some devices that require high current impulse may not be compatible with the PHOENIX 300 even though they do not exceed the power ratings of output ports.
When the PHOENIX 300 is powering devices that have high power consumption, the battery level can drop quickly. In this case, you may not get exactly 337Wh of energy.
The PHOENIX 300 can be recharged and deliver DC power to your devices simultaneously.
However, AC power is not available when the PHOENIX 300 is being recharged.

Using the LED Flashlight

• The LED Flashlights on both sides of the Folding Carrying Handle have four light modes: Bright (100% brightness), Dim (50% brightness), Flashing, and SOS.
• Press the Flashlight On/Off Button to turn on the LED Flashlights, switch light modes, and turn off the LED Flashlights. You can also long-press the Flashlight On/Off  Button to turn off the LED Flashlights no matter what mode are they in.

MAINTENANCE

• To prolong the service life of your PHOENIX 300, keep it away from harsh sunlight, water, dust, and dirt. DO NOT leave your PHOENIX 300 outside in harsh environments.
• If possible, keep your PHOENIX 300 connected to a power source when it is not being used, and avoid using large loads when the battery level is low.
• To maintain a healthy battery, please recharge your PHOENIX 300 at least once every two months.
• If you do not intend to use your PHOENIX 300 frequently, it is strongly recommended to keep its battery level at around 50% and store it in a clean, dry, and well-ventilated  environment with temperatures around 77℉ (25 ℃) and humidity no higher than 75%.
• Keep your PHOENIX 300 away from corrosives, fire, and heat sources.

TROUBLESHOOTING

• If your PHOENIX 300 does not operate normally, please refer to the following table for a possible cause and solution.
• If the following troubleshooting solutions do not work, please contact us for help. Refer to the last page of the User Guide for contact information.

All Battery Level LED Indicators
flash twice per second| 1. DC Input Port Overvoltage
Protection
2. DC Input Port Undervoltage
Protection| 1. Remove all connections
2. If the voltage rating of the power source does not fall in the range of 12~25V, stop using
that power source to recharge the unit via the DC Input Port.
3. Connect the unit to the power source that conforms to the specifications of the DC Input Port and the unit will resume recharging automatically.
All Battery Level LED Indicators
and Port Status LED Indicators
flash twice per second| 1. Battery High Temperature
Protection
2. Battery Low Temperature
Protection| 1. Remove all connections.
2. Cool down or warm up the
3. unit to the room temperature.
If the unit was powering loads, press the  Port On/Off Button(s) to turn on the output port(s) again and reconnect the loads to the unit.
4. If the unit was recharging, reconnect the unit to the power source, and the unit will resume recharging automatically.
The last Battery Level LED
Indicator flashes twice per
second and the unit gets shut
off afterward| 1. Battery Low Voltage Protection| 1. Remove all output connections.
2. Press the Port On/Off Buttons.
3. If output ports can be turned on,
it means that the loads drew too much power from the unit and pulled down the battery voltage.
In this case, only connect small loads to the unit.
4.If none of the output ports can be turned on, it means that the unit should not continue powering loads. In this case, recharge the unit as soon as possible to avoid permanent damage to the battery.
All Battery Level LED Indicators
and the Port Status LED Indicator of USB-A Ports and QC USB-A Port flash twice per second| 1. USB-A Ports or QC USB-A Port Overcurrent Protection
2. USB-A Ports or QC USB-A Port Short-circuit Protection| 1. Remove connections to the USB-A Ports and QC USB-A Port.
2. If the USB-A Ports or QC USB-A Port were shorted, remove the short circuit immediately.
3. If the loads drew currents that exceed the specifications of USB-A Ports or QC USB-A Port, stop powering those loads via the USB-A Ports or QC USB-A Port.
4. Connect only the loads that conform to the specifications of USB-A Ports and QC USB-A Port to the unit.
All Battery Level LED Indicators and the Port Status LED Indicator of D-Tap Port and CIG Port flash twice per second| 1. D-Tap Port or CIG Port Overcurrent Protection
2. D-Tap Port or CIG Port Short-circuit Protection| 1. Remove connections to the D-Tap Port and CIG Port.
2. If the D-Tap Port or CIG Port was shorted, remove the short circuit immediately.
3. If the loads drew currents that exceed the specifications of the D-Tap Port or CIG Port, stop powering those loads via the D-Tap Port or CIG Port.
4. Press the Port On/Off Button to turn on the D-Tap Port and CIG Port again and connect only the loads that conform to the specifications of D-Tap Port and CIG  Port to the unit.
All Battery Level LED Indicators and the Port Status LED Indicator of USB-C PD Port flash twice per second| 1. USB-C PD Port Overcurrent Protection
2. USB-C PD Port Short-circuit Protection| 1. Remove the connection to the USB-C PD Port.
2. If the USB-C PD Port was shorted, remove the short circuit immediately.
3. If the load drew a current that exceeds the specifications of
USB-C PD Port, stop powering that load via the USB-C  PD Port.
4. Connect only the load that conforms to the specifications of the USB-C PD Port to the unit.
All Battery Level LED Indicators and the Port Status LED Indicator of AC Outlets flash twice per second| 1. AC Outlets Overcurrent Protection
2. AC Outlets Short-circuit Protection
3. Inverter Over Temperature Protection
4. Inverter Undervoltage Protection| 1. Remove all output connections.
2. If the AC Outlets were shorted, remove the short circuit immediately.
3. If the loads drew power that exceeds the specifications  of AC Outlets, stop powering those loads via the AC
Outlets.
4. If the unit has been operating at high loads or at high
temperatures for a long time, cool down the unit to room temperature.
5. If the unit was powering large loads via AC Outlets at a  low battery level, recharge the unit before resuming operation.
6. Press the Port On/Off Button to turn on the AC  Outlets again and connect only the loads that conform to the specifications of AC Outlets to the unit.
All Battery Level LED Indicators and the Port Status LED Indicators of all operating  output ports flash twice per second| 1. Total Output Overload Protection| 1. Reallocate the outputs to keep the total output power under 300W.
2. Press the Port On/Off Button(s) to turn on only necessary output port(s).

FREQUENTLY ASKED QUESTIONS

1. Why doesn’t my PHOENIX 300 power other devices?
   First, make sure the output ports have been turned on by pressing the corresponding Port On/Off Buttons.
   Then, check the battery level of the unit. If the last Battery Level LED Indicator is flashing, please recharge the unit as soon as possible. Finally, check if the connected device conforms to the specifications of the output ports. If the unit still cant power your devices, see TROUBLESHOOTING or contact us for help. Refer to the last page of the User Guide for contact information.

2. Can I replace the battery pack in my PHOENIX 300?
   No, the battery pack in PHOENIX 300 is not replaceable. Do not try to dismantle your PHOENIX 300 and replace the battery by yourself. Doing so may cause irreversible damage to the unit and battery explosion.

3. Is the PHOENIX 300 chainable?
   No, the PHOENIX 300 cannot be chained with other power stations. If you are looking for a rechargeable AC power supply with a larger capacity, please visit our official website or contact us for more options. Refer to the last page of the User Guide for contact information.

4. Is the PHOENIX 300 waterproof?
   No, the PHOENIX 300 is not waterproof. Please keep the unit away from moisture. Do not submerge the unit in water or operate the unit in the rain. Doing so may cause short-circuits, electric shocks, and fire.

5. Why doesn’t the battery of PHOENIX 300 last as long as I expect?
   The battery capacity is rated at 0.2C. When the PHOENIX 300 is powering devices that have high power consumption, the internal resistance of the battery will turn more energy into heat and lower battery capacity as a result. When this is the case, you may not get exactly 337Wh of energy.

WARRANTY

• RENOGY products are covered by a 12-month limited warranty from the original purchase date. If any problems occur, please contact us for assistance. Refer to the last page of the User Guide for contact information.
• We only provide after-sales services for products that are sold by RENOGY or retailers and distributors authorized by RENOGY. If you have purchased your unit from other channels, please contact your seller for more information about return and warranty.
• Please register your purchase(s) directly at warranty.renogy.com/support/tickets/new or your region’s corresponding website so that we can stay in touch and contact you in the unlikely event that a safety recall is required.

FCC Compliance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation.

RENOGY.COM
Renogy reserves the right to change the contents of this manual without notice.

US| 2775 E Philadelphia St, Ontario, CA 91761, USA909-287-7111
www.renogy.com
support@renogy.com
---|---
JP| https://www.renogyjp
supportjp@renogy.com
UK| https://uk.renogy.com
supportuk@renogy.com

Easy Connection, More Power

Pair the AURA 100 Monocrystalline Solar Suitcase with the PHOENIX Portable Solar Generator or the PHOENIX 300 Power Station to get endless clean energy for your essential gadgets and small appliances.

Please visit Renogy’s official website www.renogy.com to find out
more products that are compatible with the AURA and PHOENIX.

RENOGY PHOENIX 300 POWER STATION
With an impressive capacity of 337Wh, the Renogy PHOENIX 300 Power Station is one of the smallest and lightest rechargeable AC power supplies in its class! High energy density battery cells and a compact design make it all possible. Multiple output ports allow you to power an extensive range of devices and appliances at the push of a button – quickly and safely. And powerful LED flashlights on both sides of the PHOENIX 3oo’s folding carrying handle will light your way in the darkness.

KEY FEATURES
Revolutionary Speed
The PHOENIX 3oo’s USB-C port features a Power Delivery (PD) technology that can pump out up to 60W power to compatible devices. Quick Charge (QC) technology allows for up to 18W of output power from the USB-A port.
Versatile Powering Options
The PHOENIX 30o is equipped with multiple commonly used output ports to power essential gadgets and small appliances. while a D-Tap port is at the ready for your photography and videography equipment.
Pure Sine Wave
Produce clean, silent, and stable AC power up to zoom with the pure sine wave inverter to power delicate electronic devices efficiently and safely.
Ultimate Safety
The battery management system (BMS) commands voltage control, temperature control, and short circuit protection. and overcurrent protection to keep both the power station and your devices safe from damage.

Specifications

General

Output

Input

Limited Warranty for PV Modules

Thank you for your interest in the products and services of Renogy. By acquiring the products of Renogy, you have purchased quality. As a sign of confidence in our quality, we are pleased to grant you with the following warranties for our photovoltaic products.

Limited Warranty
The products manufactured by Renogy (the “Warrantor”) are warranted to be free from defects in workmanship and materials under normal use and service. The warranty is in effect from the date of purchase by the user (the “Purchaser”). This limited warranty covers substantial defects in material or workmanship and performance.
If any Renogy PV Module(s) fails to follow this Limited Warranty and any and all power loss is determined by the Warrantor’s technical support team then the Warrantor will either repair or replace the defective PV module(s) with a new or refurbished PV module(s). All replacements will be compatible with the original PV module(s) with an equal or even greater power rating (in some cases). If for any reason Renogy is unable to repair or replace the defective PV module(s) then a refund can occur.
Please Note: All outsourced PV modules and OEM PV modules will not be covered by Renogy’s limited material and workmanship warranty or Renogy’s Limited Performance  Warranty. Instead, outsourced PV modules will be covered under the original manufacturer’s warranty, if applicable, and OEM PV modules’ warranty will be determined at the time of purchase.
Please Note: There will be a 30-day window upon receipt of the product in which the receiver may file a claim for packages that were damaged while in transit or missing components. Beyond the 30-day window, Renogy (the Warrantor) forfeits liability and the receiver assumes responsibility for incurring damage, missing items, or negligence and fees for extended storage.
Please Note: All orders over $200 will be shipped out with a signature requirement.
Please Note: Once an order has been placed, Renogy cannot reroute to a new destination. Should the shipment not be received or refused by the destination, reshipment costs will not be covered by Renogy If after shipment, cancellation is required, shipments will be subject to Renogy’s standard 10% restocking fee.

Material and Workmanship Warranty period for the following PV Modules after August 1st, 2015:
*Excluding charge controller and wire defects

RNG-240P; RNG-250D; RNG-255D; RNG-250P; RNG-260D
RNG- 260P; RNG-270D; RNG-270P; RNG-270P-S
RNG-280D; RNG-300P; RNG-300D; RNG-310P; RNG-320P
RNG-320D; RNG-320D-H| 10-year material and workmanship warranty
---|---
RNG-10D; RNG-10D-SS; RNG-20D; RNG-30D; RNG-30D-SSRKIT30DST-G1
RNG-50D; RNG-50D-SS; RNG-50P; RNG-80D-SS
RNG-100D; RNG-100D-S; RNG-100D-SS; RNG-100D-R;
RNG-100D-R-BK; RNG-100MB; RNG-100P
RNG-150D; RNG-160P; RNG-160D-SS; RNG-175D
RNG-190D; RSP200D-G1; RNG-210D
RNG-50DB-H; RNG-100DB-H
RNG-160DB-H; RNG-175DB-H; RNG-185DB-H| 5-year material and workmanship warranty
RNG-50MB-ME; RNG-KIT-STCS60D
RNG-KIT- STCS100D; RNG-KIT-STCS100D-NC
RNG-KIT-STCS100D-VOY20; RNG-KIT-STCS200D-VOY20
RNG-KIT-STCS100MB; RNG-KIT-STCS100MB-NC
RNG-KIT-STCS100MB-VOY20
RNG-KIT-STCS200MB; RNG-KIT-STCS200MB-NC
RNG-KIT-STCS200MB-VOY20
R100DAUR-G1| 3-year material and workmanship warranty
RNG-30D-C; RNG-30D-R
RNG-KIT-STCSLW-50MB-10CC
RNG-KIT-STCSLW-50MB-NC
RNG-KIT-STCSLW-100MB-10CC
RNG-KIT-STCSLW-100MB-NC| 1-year material and workmanship warranty

The performance Warranty period for the following PV Modules after August 1st, 2015:
Excluding charge controller and wire defects
The power output will be measured under Renogy standard measurement conditions.

RNG-10D; RNG-10D-SS; RNG-20D; RNG-30D; RNG-30D-SS
RNG-30D-C; RNG-30D-R; RKIT30DST-G1
RNG-50D; RNG-50D-SS; RNG-80D-SS
RNG-100D; RNG-100D-S; RNG-100D-SS
RNG-100D-R; RNG-100D-R-BK; RNG-100MB
RNG-150D; RNG-160D-SS; RNG-175D; RSP200D-G1
RNG-250D; RNG-255D; RNG-260D; RNG-270D; RNG-280D; RNG-300D
RNG-320D; RNG-320D-H
RNG-50P; RNG-100P; RNG-160P; RNG-240P; RNG-250P; RNG-260P;
RNG-270P; RNG-270P-S; RNG-300P; RNG-310P; RNG-320P
RNG-50DB-H; RNG-100DB-H; RNG-160DB-H; RNG-175DB-H
RNG-50MB-ME; RNG-KIT-STCS60D
RNG-KIT-STCS100D; RNG-KIT-STCS100D-NC
RNG-KIT-STCS100D-VOY20; RNG-KIT-STCS200D-VOY20
RNG-KIT-STCS100MB; RNG-KIT-STCS100MB-NC
RNG-KIT-STCS100MB-VOY20
RNG-KIT-STCS200MB; RNG-KIT-STCS200MB-NC
RNG-KIT-STCS200MB-VOY20; R100DAUR-G1| 5-year 95% output warranty
10-year 90% output warranty
25-year 80% output warranty
---|---
RNG-KIT-STCSLW-50MB-10CC; RNG-KIT-STCSLW-50MB-NCRNG-KIT-STCSLW-100MB-10CC; RNG-KIT-STCSLW-100MB-NC| No Performance Warranty

General Conditions for Warranty Claims
For Workmanship and Material Warranty: If the Purchaser experiences any defects in materials and workmanship under normal application, such as defects and/or failures due to manufacturing or due to materials, it is their responsibility to contact the Warrantor’s technical support team. The technicians will offer steps and procedures to test the PV  module(s), repair the PV module(s) or require the Purchaser to ship the PV module(s) to the technical support team if needed. Based on the outcome, the warranty service will then be in effect.
For Performance Warranty: If the Purchaser experiences any difficulty with the performance of their PV module(s), it is their responsibility to contact the Warrantor’s technical support team. If the PV module(s) is under performance warranty, the technicians will offer steps and procedures to test a product, repair a product or require the Purchaser to ship the product to the technical support team if needed. The power output volumes with be determined by Renogy standard measurement conditions. Based on the outcome,  the warranty service will then be in effect.
This warranty extends only to the original Purchaser. If gifted or resold the customer must go through the original Purchaser in order to claim the warranty. Original order information is needed to claim the warranty. If the original order was shipped within the US, the Purchaser will be responsible for additional shipping costs out of the US. The  Customer’s sole and exclusive remedy and the entire liability of the Warrantor, its suppliers, and affiliates for breach of the warranty is, either to replace the PV module(s) or component parts of the PV module(s), and in some cases refund the PV module(s) cost. This warranty does not cover labor. PV modules or components that have been serviced or replaced under their warranty period do not receive extended warranties. Instead, the serviced/replaced PV module(s) will abide by the original warranty period issued when first purchased. No employee, agent, dealer, or any other person is authorized to give any warranties on behalf of the Warrantor, not expressly set forth in this limited warranty.

Exclusions and Limitations

The warranty does not cover failures resulting from incorrect handling, product modifications, installation, conversion or additions, supplements, operation, natural elements  (weather), excessive or deficient energy supply, chemicals, the effect of solid bodies, or deliberate damage. If the Warrantor determines that the problem with the PV module(s) is not due to a manufacturing defect in the Warrantor’s workmanship or materials, or otherwise does not qualify for warranty repair, then the Purchaser will be responsible for all costs incurred by the Warrantor necessary to repair, replace and transport the PV module(s).
The warranty shall be asserted with the Warrantor in writing enclosing a copy of the invoice and a description of the defect/loss of performance within the warranty period. The  Warrantor shall accept no returns of PV modules without the previous written request for this. Within five (5) business days of the date of notification, the Warrantor will provide the Purchaser with an RMA number and the location to which the Purchaser must return the defective PV module(s). Any PV module(s) returned for valid warranty service shall be shipped at the expense and risk of the Warrantor. The Purchaser must return the PV module(s) (or, if authorized by the Warrantor, the defective component parts), within fifteen (15) days after issuance of the RMA number. The Warrantor will be under no obligation to accept any returned PV module(s) that does not have a valid  MA number. All parts that the Warrantor replaces shall become the Warrantor’s property on the date the Warrantor ships the repaired PV module(s) or part back to the  Purchaser. The Warrantor will use all reasonable efforts within thirty (30) days of receipt of the defective PV module(s) to repair or replace such PV module. If a warranty claim  is invalid for any reason, the Purchaser will be charged at the Warrantor’s then-current rates for services performed and will be charged for all necessary repairs and expenses incurred by the Warrantor. If the Warrantor determines that a warranty claim is valid, it will ship the repaired or replaced PV module(s) to the Purchaser at the Warrantor’s cost.

RENOGY MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY  OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION  ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE.

LIMITATION OF LIABILITY

UNDER NO CIRCUMSTANCES WILL RENOGY OR ITS AFFILIATES OR SUPPLIERS BE LIABLE OR RESPONSIBLE FOR ANY LOSS OF USE,  INTERRUPTION OF BUSINESS, LOST PROFITS, LOST DATA, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN  IF RENOGY OR ITS AFFILIATE OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. Neither Renogy nor its affiliates or suppliers will be held liable or responsible for any damage or loss to any items or products connected to, powered by or otherwise attached to the Product. The total cumulative liability to the Purchaser, from all causes of action and all theories of liability, will be limited to and will not exceed the purchase price of the Product paid by the Purchaser. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.

Renogy
2775 E. Philadelphia St.
Ontario, CA 91761
Phone: 909-287-7111
Fax: 888-543-1164

Limited Warranty for Accessories

Thank you for your interest in the products and services of Renogy. By acquiring the products of Renogy, you have purchased quality. As a sign of confidence in our quality, we are pleased to grant you with the following warranties for our products.

Limited Warranty
The products manufactured by Renogy (the “Warrantor”) are warranted to be free from defects in workmanship and materials under normal use and service. The warranty is in effect from the date of purchase by the user (the “Purchaser”). This limited warranty covers substantial defects in material or workmanship and performance.
If any Renogy product(s) fail to follow this Limited Warranty and any and all power loss is determined by the Warrantor’s technical support team then the Warrantor will either repair or replace the defective product(s) with a new or refurbished product(s). All replacements will be compatible with the original product(s) with an equal or even greater power rating (in some cases). If for any reason Renogy is unable to repair or replace the defective product(s) then a refund can occur.
Please Note: All outsourced product(s) will not be covered by Renogy’s limited material and workmanship warranty. Instead, outsourced products will be covered under the original manufacturer’s warranty, if applicable. Including but not limited to Samlex America, Enphase Energy, MidNite Solar Inc., VMAX USA,
UPG (Universal Power Group), RITAR, etc.
Please Note: There will be a 30-day window upon receipt of the product in which the receiver may file a claim for packages that were damaged while in transit or missing components. Beyond the 30-day window, Renogy (the Warrantor) forfeits liability and the receiver assumes responsibility for incurring damage, missing items, or negligence and fees for extended storage.

Prorated Warranty

Prorated warranted products manufactured by Renogy (the “Warrantor”) are warranted to be free from defects in workmanship and materials under normal use and service.  The warranty is in effect from the date of purchase by the user (the “Purchaser”). This limited warranty covers substantial defects in material or workmanship and performance and follows the guidelines of the Limited Warranty with the addition of the following table detailing exchange costs for warranty replacements for prorated warranty items.
*Please Note: Failure to properly install or operate the battery will void the warranty. Please refer to the product page on our website for detailed installation and operation instructions.

Material and Workmanship Warranty period for the following products after August 1,st 2015

RNG-AK-10FT-10; RNG-AK-10FT-12; RNG-AK-20FT-10; RNG-AK-20FT-12;
RNG-AK-30FT-10; RNG-AK-30FT-12; RNG-AK-40FT-10; RNG-AK-40FT-12;
RNG-AK-9IN-12;
RNG-BATTERYCB-12IN-4; RNG-BATTERYCB-14IN-4
RNG-BATTERYCB-16IN-4
REC1.5FT12PR-G1 ; REC5FT10PR-G1; REC5FT12PR-G1
REC10FT10PR- G1 ; REC10FT12PR-G1 ; REC15FT10PR-G1
REC15FT12PR-G1 ; REC20FT10PR-G1; REC20FT12PR-G1
RNG-INVTCB-5FT-4; RIVCB2FT4-G1; RIVCB3FT4-G1
RNG-INVTCB-5FT-0000
RNG-TRAYCB-8FT-8; RNG-TRAYCB-8FT-10; RNG-TRAYCB- 8FT-12
RNG-TRAYCB-16FT-8; RNG-TRAYCB-16FT-10; RNG-TRAYCB-16FT-12
SOLAR CONNECTORS FOR SOLAR PANELS MALE & FEMALE PAIR
SOLAR Y BRANCH CONNECTORS MMF+FFM PAIR
3 TO 1 SOLAR BRANCH CONNECTORS MMMF+FFFM PAIR
4 TO 1 SOLAR BRANCH CONNECTORS MMMMF+FFFFM PAIR
SOLAR CONNECTOR TO SAE ADAPTER 12 AWG CABLE
PHOENIX SOLAR CONNECTOR TO 4.5MM DC ADAPTER
RNG-PHOENIX-DC-DC; RNG-PHOENIX-CIG-DC; RNG-LYCAN-RJ45
SOLAR CONNECTOR TO ANDERSON POWERPOLE ADAPTER CABLE
RNG-LYCAN-XT90; RNG-CNCT-DC-BULB
RNG-LYCAN-ADS-ALGTR; RNG-LYCAN-CIG-ADS; RNG-ANLFUSECB
RNG-TRAYCBDR-8FT-4; RNG-TRAYCB-ALGTR
RNG-RV1530-12IN-12-BL; RNG-RV1550-12IN-10-BL
RNG-RV3015-12IN-12-BL; RNG-RV3050-12IN-10-BL
RNG-RV5030-12IN-10-BL
RBARA23FT4-G1; RBARA7FT4-G1; RBARA1FT4-G1
RADEC15FT4-G1; RADEC4.5FT4-G1| Cables & Connectors
1-year material and
workmanship warranty
---|---
RNG-CNCT-FUSE10; RNG-CNCT-FUSE15; RNG-CNCT-FUSE20
RNG-CNCT-FUSE30
RNG-ANL-FUSE20; RNG-ANL-FUSE30; RNG-ANL-FUSE40
RNG-ANL-FUSE60; RNG-ANL-FUSE100
RNG-SET-ANL20; RNG-SET-ANL30; RNG-SET-ANL40; RNG-SET-ANL60;
RNG-SET-ANL100| Fuses
1-year material and
workmanship warranty
RNG-MTS-ZB; RNG-MTS-ACB; RNG-MTS-CB; RNG-MTS-SP100
RNG-MTS-WM
RNG-MTS-MPM4; RNG-MTS-MPM5; R-MTS-MPM; RNG-MTS-STM
RNG-MTS-TM100; RNG-MTS-TMB; RNG-MTS-CE; RNG-MTS-QMSC| Mounts & Brackets

1-year material and
workmanship warranty

RNG-CTRL-PWM10DB; RNG-CTRL-PWM20DB; RNG-CTRL-WND30
RNG-CTRL-WND30-LI; RNG-CTRL-VOY20; RNG-CTRL-VS-TS
RNG-CTRL-CMD20; RNG-CTRL-CMD40; RNG-CTRL-CMD60| Charge Controllers

1-year material and
workmanship
warranty

RNG-CTRL-WND10; RNG-CTRL-WNDPG10
RCC10VOYP-G1; RCC20VOYP-G1; RNG-CTRL-ADV30-LI
RCC20RVRE-G1, RCC40RVRE-G1
RNG-CTRL-RVR20; RNG-CTRL-RVR30; RNG-CTRL-RVR40
RNG-CTRL-RVRPG20; RNG-CTRL-RVRPG30; RNG-CTRL-RVRPG40;
RNG-CTRL-RVRPG60; RNG-CTRL-RVR60; RNG-CTRL-RVR100
RCC45RVRP; RCC60RVRP
RCC10RVRB
RBC30D1S; RBC50D1S-G1| Charge Controllers
2-year material and
workmanship
warranty 
RNG-INVT-500-12V; RNG-INVT-1000-12V; RNG-INVT-2000-12V
RNG-INVT-600-12V-P3; RNG-INVT-1000-12V-P3
RNG-INVT-2000-12V-P3
RNG-INVT-700-12V-P2; RNG-INVT-1000-12V-P2
RNG-INVT-2000-12V-P2; RNG-INVT-3000-12V-P2
R-INVT-PGH1-10111S; R-INVT-PGH1-20111S; R-INVT-PGH1-30111S| Inverters
1-year material and
workmanship
warranty
RNG-INVT-1000-12V-C; RNG-INVT-2000-12V-C; RNG-INVT-3000-12V-C;
R-INVT-PCL1-20111S; R-INVT-PCL1-30111S
RIV4835CSH1S| Inverter-Chargers
1-year material and
workmanship
warranty
RNG-BATT-GEL12-200; RNG-BATT-GEL12-100; RNG-BATT-GEL12-160;
RNG-BATT-GEL6-260
RBT100GEL12-G1 ; RBT200GEL12-G1
RBT100GEL12B (The battery box is warranted separately for 1 year)| GEL Batteries
3-year material
warranty
RNG-BATT-AGM12-100; RNG-BATT-AGM12-200; RNG-BATT-AGM6-260;RNG-BATT-AGM12-7; RNG-BATT-AGM12-9; RNG-BATT-AGM12-18
RBT100AGM12B (The battery box is warranted separately for 1 year)| AGM Batteries
2-year material
warranty
RNG-BATT-LFP12-50; RNG-BATT-LFP12-100; RNG-BATT-LFP-12-170;RBT100LFP12S-G1; RBT50LFP48S| LFP Batteries
**5-year prorated warranty
RBB2431; RBBIV1210CC20; RBB400-G1| Battery Box
1-year material and
workmanship warranty
RBC20A1P
RNG-BATT-ISO200
RNG-DCC1212-20; RNG-DCC1212-40; RNG-DCC1212-60
RNG-DCC1212-100; RBC30D14
RDC4812N60| Battery Chargers &
DC-DC Converters 1-year material and
workmanship warranty 
RNG-CTRL-BT-1; RCM-BT1-G1; RCM-BT2-G1; RCM-HUB-G1
RNG-CTRL-DM-1
RNG-TRCRMTR-MT-1; RNG-TRCRMTR-MT-5
RNG-TRCRMTR-MT-50; RMS-RVRE; RMS-DCDC
RBM500-G1; RMS-LFPS
RNG-INVT-C-RC; RMS-PGH| Monitoring
1-year material and
workmanship
warranty
RNG-CTRL-TS; RNG-VOY-TS; RTSCC-G1; RTSDCC-G1; RVSCC;
MCEVOY-G1
SOLAR CONNECTOR ASSEMBLY TOOL
RNG-TOOL-SD; RNG-TOOL-CR; RNG-TOOL-WS; RNG-TOOL-MM;
RNG-TOOL-BOX; RNG-TOOL-V46
RSCB1.8M24| Accessories & Tools
1-year material and
workmanship
warranty
RNG-CMP-PACK; RMFF-3P6V-101; RNG-CMP-T100; RNG-CMP-RPP
RNG-CMP-EFL5; RNG-CMP-EFL10; RNG-CMP-EFLP5; RNG-CMPEFLP10; RNG-CMP-ELMN200; R526ELS-G1; R526ELS-G2 RNG- CMP-ITUNES; RNG-CMP-SPB15K-US-R RNG-ELM-PHOENIX; RNG- ELM-LYCAN; R100PHX-G1; R200PHX; R300PHX-G1; R300PHXE RSP5TC-G1; RSP8TC-G1; RSP10TC-G1; RSP16TC-G1 RSP5BM;  RSP10BM R21EF-G1; R30EF-G1; R50EF; R100EF-G1; R120EF-G1  R10EPS-G1; R16EPSQC-G1; R20EPSQC-G1; R24EPSQC-G1 RNG- JS12000-01 RSP5CPR-G1; RSP10GO-G1| Consumer Products
1-year material and
workmanship
warranty

General Conditions for Warranty Claims
For Workmanship and Material Warranty: If the Purchaser experiences any defects in materials and workmanship under normal application, such as defects and/or failures due to manufacturing or due to materials, it is their responsibility to contact the Warrantor’s technical support team. The technicians will offer steps and procedures to test the product(s), repair the product(s) or require the Purchaser to ship the product(s) to the technical support team if needed. Based on the outcome, the warranty service will then be in effect.
This warranty extends only to the original Purchaser. If gifted or resold the customer must go through the original Purchaser in order to claim the warranty. Original order information is needed to claim the warranty. If the original order was shipped within the US, the Purchaser will be responsible for additional shipping costs out of the US. The  Customer’s sole and exclusive remedy and the entire liability of the Warrantor, its suppliers, and affiliates for breach of the warranty is, either to replace the product(s) or component parts of the product(s) and in some cases refund the product(s) cost. This warranty does not cover labor. Products that have been serviced or replaced under their warranty period do not receive extended warranties. Instead, the serviced/replaced product(s) will abide to the original warranty period issued when first purchased. No  employee, agent, dealer or any other person is authorized to give any warranties on behalf of the Warrantor, not expressly set forth in this limited warranty.

Exclusions and Limitations
The warranty does not cover failures resulting from incorrect handling, product modifications, installation, conversion or additions, supplements, operation, natural elements  (weather), excessive or deficient energy supply, chemicals, the effect of solid bodies or deliberate damage. If the Warrantor determines that the problem with the product(s) is not due to a manufacturing defect in the Warrantor’s workmanship or materials, or otherwise does not qualify for warranty repair, then the Purchaser will be responsible for all costs incurred by the Warrantor necessary to repair, replace and transport the product(s).
The warranty shall be asserted with the Warrantor in writing enclosing a copy of the invoice and a description of the defect/loss of performance within the warranty period. The  Warrantor shall accept no returns of the product(s) without the previous written request for this. Within five (5) business days of the date of notification, the Warrantor will provide the Purchaser with an RMA number and the location to which the Purchaser must return the defective module(s). Any product(s) returned for valid warranty service shall be shipped at the expense and risk of the Warrantor. The Purchaser must return the product(s) (or, if authorized by the Warrantor, the defective component parts), within fifteen (15) days after issuance of the RMA number. The Warrantor will be under no obligation to accept any returned product(s) that does not have a valid RMA number. All parts that the Warrantor replaces shall become the Warrantor’s property on the date the Warrantor ships the repaired product(s) or part back to the Purchaser. The Warrantor will use all reasonable efforts within thirty (30) days of receipt of the defective product(s) to repair or replace such product(s). If a warranty claim is invalid for any reason, the  Purchaser will be charged at the Warrantor’s then-current rates for services performed and will be charged for all necessary repairs and expenses incurred by the Warrantor. If the Warrantor determines that a warranty claim is valid, it will ship the repaired or replaced product(s) to the Purchaser at the Warrantor’s cost.

Exclusions and Limitations for Batteries
The warranty does not cover failures resulting from incorrect handling, product modifications, installation, conversion or additions, supplements, operation, natural elements  (weather), excessive or deficient energy supply, chemicals, the effect of solid bodies, or deliberate damage. Additionally, the warranty does not cover damages sustained from abuse or neglect, damage from shipping, loose terminal or bolts resulting in over-heating, water damage, worn-out batteries, or tampered batteries. If the Warrantor determines that the problem with the product(s) is not due to a manufacturing defect in the Warrantor’s workmanship or materials, or otherwise does not qualify for warranty repair, then the Purchaser will be responsible for all costs incurred by the Warrantor necessary to repair, replace and transport the product(s). The Warrantor will not be responsible for expenses related to installation/removal, electrical system tests, loss of time, or other expenses considered incidental damages.

RENOGY MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY  OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION  ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE.

LIMITATION OF LIABILITY

UNDER NO CIRCUMSTANCES WILL RENOGY OR ITS AFFILIATES OR SUPPLIERS BE LIABLE OR RESPONSIBLE FOR ANY LOSS OF USE,  INTERRUPTION OF BUSINESS, LOST PROFITS, LOST DATA, OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN  IF RENOGY OR ITS AFFILIATE OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. Neither Renogy nor its affiliates or suppliers will be held liable or responsible for any damage or loss to any items or products connected to, powered by or otherwise attached to the Product. The total cumulative liability to the Purchaser, from all causes of action and all theories of liability, will be limited to and will not exceed the purchase price of the Product paid by the Purchaser. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.

Renogy
2775 E. Philadelphia St.
Ontario, CA 91761
Phone: 909-287-7111
Fax: 888-543-1164

RENOGY.COM/RENOGY-GEAR
909.287.7111

ABOUT US
Renogy started as a small project by students at Louisiana State University. With the help and support of the Louisiana Business and Technology Center, Renogy has grown into a healthy and flourishing company. At its inception, Renogy sold a limited range of solar products through Amazon, eBay!, and a handful of suppliers. It wasn’t much longer until Renogy grew its product lines by creating innovative products to solve everyday problems. During the process, Renogy was able to increase our presence by expanding the number of online marketplaces. suppliers, and wholesale partners they worked with. Over the years, Renogy has received numerous awards and recognition, including a spot in
Inc. 5ooo’s top 500 fastest growing private companies in 2016. Today, you can find Renogy all over the globe – and it’s all thanks to the help and support we’ve received from  Louisiana State University, hardworking Renogy employees, our suppliers, and of course, our amazing customers.

PORTABLE GENERATORS

LYCAN POWERBOX
SKU: RNG-ELM-LYCAN

• AC and DC output

• 3 ways to charge:
  o Solar power
  o AC power
  o 12V car charging socket

• Power any USB or AC appliance under 1200W

• Heavy duty handle and wheels for portability

• Compatible with all
  Renogy solar panels
  up to 300W

PHOENIX
PORTABLE GENERATOR
SKU: RNG-ELM- PHOENIX

• All-In-One solar system

• 3 ways to charge:
  o Solar power
  o AC power
  o 12V car charging socket

• MPPT charging technology

• Pure sine wave inverter

• Capability to add up to 100W more

PHOENIX
2.00 MINI POWER STATION
SKU: R100PHX-G1

• Available AC outlet
• Compact size for on the go
• 27ooomAh capacity battery
• The lifespan of 1,000• cycles
• Charges your laptop in as little as 2 hours

PORTABLE CHARGERS

THE E.POWER SERIES
Available in 10,000, 16,000, 20,000, and 24,oooh
SKU: R10EPS-G1, R16EPSQC-G1, R20EPSQC-G1, R24EPSQC-G1

• Integrate solar panel for auxiliary charging

• Multi-mode LED flashlight

• Superior durability

• Built-in carabiner/carabiner loop

• Quick Charge technology
  o 16k, 20k, and 24k models only

• Waterproof
  o 16k, 20k, and
  24k models only

SOLAR CHARGERS

THE E.FLEX SERIES
SKU: R21EF-G1 and R30EF-G1

• Foldable design for ultimate portability
• Optimized charging with advanced iSolar Technology
• Premium high-efficiency solar panels
• Adjustable nylon kickstand
• Rugged nylon protective backing

E.LUMEN 500
MULTI-FUNCTIONAL FLASHLIGHT
SKU: R526ELS-G2

• Superior brightness
  o A powerful headlight and sidelight combine to offer
  7 working modes

• Your outdoor companion
  o Integrated seat belt cutter, glass shattering hammer, and more!

• Effortless recharging
  o A high-efficiency solar panel utilizes sunlight to recharge the E.LUMEN 500
  • Portable charging
  o A built-in rechargeable battery keeps your essentials fully charged

References

• Renogy® Official- offer all off grid solar system products
• Renogy® Official- offer all off grid solar system products
• Renogy® Official- offer all off grid solar system products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>