Consciot ‎CL37003-RGB-US-2 Solar Landscape Light User Manual

May 15, 2024
Consciot

User Manual
Solar Landscape Light
Consciot ‎CL37003 RGB US 2 Solar Landscape Light

SPECIFICATION

Consciot ‎CL37003 RGB US 2 Solar Landscape Light - Fig

LeD 24LEDs
Location Type Wetlocation
Working temperature -10-40°C
Housing material ABS
Induction mode Light control

INTRODUCTION

The solar landscape lights can automatically detect the changes in the brightness of the exteral environment. When the brightness is low enough, it will automatically switch from energy-saving mode to lighting mode without motion detection (Auto on at night / Auto off at sunrise).

Consciot ‎CL37003 RGB US 2 Solar Landscape Light - Fig
1

PACKAGE CONTENTS

Lamp body
Plastic Rod1
Plastic Rod2
Plastic Spike
User Manual
“Note: I 4 Pack, content A-D will double.

Consciot ‎CL37003 RGB US 2 Solar Landscape Light - Fig
2

INSTALLATION

Press the button and select a desired mode. Then choose a place that can get enough sunshine to install the light, the more sunshine it gets, the longer it can illuminate.

  1. Take out the lamp body, connect the rods and spike in different combinations based on the height you need, adjust the angle of lamp holder and solar panel.Consciot ‎CL37003 RGB US 2 Solar Landscape Light - Fig 3
  2. Tighten the knob clockwise to prevent looseningConsciot ‎CL37003 RGB US 2 Solar Landscape Light - Fig 4
  3. Insert the assembled light into the ground vertically.

OPERATION GUIDE

The default mode of the product is OFF mode. Press the button to adjust modes when using the light.

Consciot ‎CL37003 RGB US 2 Solar Landscape Light -
Button

3 LIGHTING MODES
Press the power button, turn on the solar landscape light.
It will charge but not light up in the day and automatically be on in darkness or at night.
Press once to switch among colors under below 3 Modes in a sequence:
Solid Color Mode
Red, Green, Blue, Max working time: 12 hours
Mix Color Mode
Red & Green, Red & Blue, Green & Blue, Rainbow(3 colors mixed),
Max working time: 12 hours.
Color Cycling Mode
‘The solar light will change the color gradually in a cycle.
Max working time: 12 hours
OFF
On the basis of Color Cycling Mode, press the power button again, the landscape light will power off.
‘WARM TIPS

  1. Itis recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
  2. During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
  3. Whether the solar landscape lights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions.

TROUBLE SHOOTING

If the light failed to tum on, please
a ) check if there is any light source around;
b) charge the light for a while and then cover the solar panel to have a test;
c ) make sure you hear a clear “click” sound when you press the button.
Consciot
Our goalis to bring you the best shopping experience on Amazon.
If you have any questions about our product, please feel free 1o contact us. Our customer service is right here to resolve the case.

CaII:+1 866-698-6211(PST
9:OOam-5:OOpm, Monday to Friday)
[email protected]
https://www.consciot.com
Why not share your stories to help other buyers?
Madein China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Consciot User Manuals

Related Manuals