Consciot LS37001-RGB-US-4 Solar Landscape Light User Manual

June 15, 2024
Consciot

Consciot LS37001-RGB-US-4 Solar Landscape Light

Consciot-LS37001-RGB-US-4-Solar-Landscape-Light-
PRODUCT

SPECIFICATION

LED 54 LEDs
Location Type Wet location
Working temperature -10-40°C
Housing material ABS
Induction mode Light control

DIMENSIONS

INTRODUCTION

The solar landscape lights can automatically detect the changes in the brightness of the external environment. When the brightness is low enough, it will automatically switch from energy-saving mode to lighting mode without motion detection (Auto on at night/ Auto off at sunrise).

PACKAGE CONTENTS

  • Lamp body
  • Plastic Rod 1
  • Plastic Rod2
  • Plastic Spike
  • User Manual

Note : If 4 Pack, content A-D will double

Press the button and select a desired mode. Then choose a place that can get enough sunshine to install the light, the more sunshine it gets, the longer it can illuminate.

  1. Take out the lamp body, connect the rods and spike in different combinations based on the height you need, adjust the angle of lamp holder and solar panel.Consciot-LS37001-RGB-US-4-Solar-Landscape-Light-FIG- \(5\)
  2. Insert the assembled light into the ground vertically.

OPERATION GUIDE

The default mode of the product is OFF mode. Press the button to adjust modes when using the light.

3 LIGHTING MODES
  • Press the power button, turn on the solar landscape light. It will charge but not light up in the day and automatically be on in darkness or at night.
  • Press once to switch among colors under below 3 Modes in a sequence:
    • Solid
    • Colour
    • Mode
  • Red, Green, Blue, Max working time: 12 hours.

Mix Color Mode
Red & Green, Red & Blue, Green & Blue, Rainbow(3 colors mixed), Max working time: 12 hours.

Color Cycling Mode
The solar light will change the color gradually in a cycle, Max working time: 12 hours.

OFF
On the basis of Color Cycling Mode, press the power button again, the landscape light will power off.

WARM TIPS

  1. lt is recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
  2. During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
  3. Whether the solar solar landscape lights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons and other conditions.

If the light failed to turn on, please

  • check if there is any light source around;
  • charge the light for a while and then cover the solar panel to have a test;
  • make sure you hear a clear “click” sound when you press the button.

Consciot
Our goal is to bring you the best shopping experience on Amazon. If you have any questions about our product, please feel free to contact us. Our customer service is right here to resolve the case.

1-855-955-7007(24×7) support@consciot.com, https://www.consciot.com

Why not share your stories to help other buyers?

Made in China

Documents / Resources

| Consciot LS37001-RGB-US-4 Solar Landscape Light [pdf] User Manual
LS37001-RGB-US-2, LS37001-RGB-US-4, LS37001-RGB-US-4 Solar Landscape Light, LS37001-RGB-US-4, Solar Landscape Light, Landscape Light, Light
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals