Consciot M17KEY Ceiling Fan Instructions
- June 15, 2024
- Consciot
Table of Contents
M17KEY Ceiling Fan
Remote controller
GENERAL INFORMATION
1. INSTALLING RECEIVER IN CEILING FAN
A. Safety precautions
WARNING: HIGH VOLTAGE!
Disconnect power by removing fuse or switching off circuit breaker.
Electrical wire must meet all local and national electrical code requirements
B. Electrical rating: 100V–240VAC 50/60Hz
C. Wiring diagram:
2. OPERATING TRANSMITTER:
A. Install battery LR03/AAA1.5V*2(not included).
(To prevent damage to transmitter, remove the battery if not used for a long time). B. Store the transmitter away from excessive heat or humidity.
C. Operating the buttons on the panel of the transmitter.
3. Setting the codes on the receiver:
Learning code matching mode is used between REMOTE CONTROL and receiver. Turn on the supply power within 5 seconds and press the REMOTE CONTROL “ALL OFF” button for 3 seconds, it can load normally after hearing a long sound “bee”, which means learning successfully and it can works normally.
(PS: Learning mode not accepted after turn “ON” the supply power for 5 seconds)