Consciot A19 E26 Wi-Fi Smart Light Bulbs Instruction Manual
- June 14, 2024
- Consciot
Table of Contents
Wi-Fi Smart Light Bulb
Operation Manual
Function Introduction
Installation Instructions
- Afterinstalling the bulb, power onthe bulb
- The bulo wil gradually change to a warm white light after R-G-B-W, and then enter the state of waiting to connect to the network
- To connect bulb to the Internet, download the Aidot APP and follow the AP guidelines
Quick Start Guide
-
Scan the OR code below, or search for’AiDot” in App Store or Google Play. https://apps.aidot.com
Google, Google Home and Google play ae trademarks of Google LLC. -
Create an account and sign in Tap “+ to add the “Wi-Fi Light Bulb”.
-
Follow the instructions on the App.
(Note:Please turn on Bluetooth and location. )
For more information about the usage guidelines and FAQs, Please scan the OR code below or visit the website: https://www.aidot.com/s/00002a
Warning
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. Such modifications
or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur ina particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
To maintain compliance with FCC’ s RF Exposure guidelines, This equipment
should be installed and operated with minimum 20cm distance between the
radiator and your body: Use only the supplied antenna.
Cautions
To avoid personal injury and/or possible product damage, the following
cautions must be followed:
- Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.
- To prevent early lamp failure, lamp should only be installed in operating environments ranging between: -20C and +40 C (-4°F and +104°F).
- Suitable for damp locations.
- Not for use with dimmers.
- Lamp dims via wireless control and will not operate with a dimmer switch.
- Not for use in totally enclosed luminaires.
- Not for use in emergency light fixtures or exit signs.
- Ensure fixture can support the added weight of the lamp/bulb.
Contact Us
SPRING SUNSHINE TECHNOLOGY CO.,
LIMITED FLAT/RM 01-04. 24/F. FU FAI
COMMERCIAL CENTRE, 27 HILLIER STREET,
SHEUNG WAN, HK
Phone: +1 866-698-6211
Website: www.consciot.com
Email: support@consciot.com
Made in China
Manufacturer: Leedarson loT Technology Inc.
Adress: No.1511, 2nd Fanghu North Rd, Huli
District, Xiamen, China
V1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>