kogan KAMHTDRY8NA 8KG Heat Pump Dryer User Guide

kogan KAMHTDRY8NA 8KG Heat Pump Dryer

Specifications:

• Product: 8 KG Heat Pump Dryer
• Model: KAMHTDRY8NA
• Capacity: 8 KG
• Installation Type: Free-standing
• Power Source: Electric

Product Usage Instructions

• Safety & Warnings
  Before using the dryer, read the safety precautions in the manual to reduce the risk of fire, electric shock, and injury. Consult a licensed professional if unsure about maintenance tasks.

• Installation
  Follow the installation instructions carefully. Ensure the dryer is not installed in a mobile home. Make sure to provide adequate clearances as per the location requirements mentioned in the manual.

• Before First Use
  Ensure the dryer is properly grounded. Do not modify the plug provided with the dryer. Remove the door from all discarded appliances to prevent accidents.

• Operation
  Use the control panel to set drying cycles. Empty the water tank and clean the filter regularly to maintain efficiency. Do not touch internal parts during operation.

• Cleaning & Care
  Regularly clean the filter and air inlet to prevent blockages. Wipe down the exterior of the dryer with a damp cloth. Avoid using abrasive cleaners.

• Troubleshooting
  Refer to the troubleshooting section in the manual for common issues and solutions. Contact customer support if problems persist.

FAQ :

• Q: Can I stack a washing machine on top of the dryer?
  A: No, it is not recommended to stack a washing machine on top of the dryer. Follow the stacking kit instructions if you want to stack a dryer on top of a washing machine.

• Q: What should I do if I encounter an error code on the control panel?
  A: Refer to the troubleshooting section of the manual for information on error codes. If the issue persists, contact customer support for assistance.

8KG HEAT PUMP DRYER
KAMHTDRY8NA

SAFETY & WARNINGS

Read this manual thoroughly before first use, the safety precautions listed below reduce the risk of fire, electric shock and injury when correctly adhered to. Retain this user guide for future reference. If applicable, pass these instructions on to the next owner.

WARNING

• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Children less than 36 months old should be kept away unless continuously supervised.

• Ensure the lint filter is cleaned after every cycle and whenever prompted by the dryer.

• The lint filter and filter drawer should be washed frequently.

• Ensure location of the dryer is well ventilated.

• Before use, the dryer must be properly installed as described in this user guide.

• Always follow the fabric care instructions supplied by the garment manufacturer.

• Do not dry articles that have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapours that could ignite or explode.

• Do not use the dryer to dry clothes which have traces of any flammable substance, such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc. or anything containing wax or chemicals, such as mops and cleaning clothes. Flammable substances may cause the fabric to catch fire by itself.

• Do not store or use gasoline or other flammable vapours and liquids near this or any other appliance.

• Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.

• Before the appliance is removed from service or discarded, remove the lid of the washing or door of the drying compartment.

• Do not reach into the appliance if the drum is moving.

• Do not install or store this appliance where it will be exposed to the weather or freezing temperatures.

• Do not tamper with the controls.

• Do not repair or replace any part of the appliance or attempt any servicing unless it is specifically recommended in the Ensure that you understand all instructions and have the skills necessary to carry out any maintenance. If you are not confident, please consult a licenced trade professional.

• Keep the area underneath and around your appliances free of combustible materials
  (lint, paper, rags, etc.), gasoline, chemicals and other flammable vapours and liquids.

• Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• To reduce the risk of fire due to contaminated loads, the final part of a tumble dryer cycle occurs without heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

• Turn off the water faucets and unplug the washer if the machine is to be left for an extended period, such as during vacations.

• Packaging material can be dangerous for children. There is a risk of suffocation! Keep all packaging from children.

• Always check the inside of the dryer for foreign objects before loading laundry. Keep the door closed when not in use.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

• Clean the lint screen before or after each load.

• Keep the area around the exhaust opening and surrounding areas free from lint, dust and dirt.

• The interior of the dryer and exhaust duct should be cleaned periodically by qualified service personnel.

• Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• This appliance must be properly grounded. Never plug the power cord into a receptacle that is not grounded adequately and in accordance with local and national codes. Refer to installation instructions for grounding this appliance.

• Ensure pockets are free from small irregularly shaped hard objects and foreign material, i. e. coins, knives, pins, etc. These objects could damage your dryer.

• Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

Warning: To reduce the risk of fire or explosion

• Do not dry items that have been previously cleaned, washed, soaked or spotted with gasoline, dry cleaning solvents or other flammable or explosive substances. They emit vapours that could ignite or explode.
• Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.
• There are many highly flammable items used in homes, such as acetone, denatured alcohol, gasoline, kerosene, some liquid household cleaners, some spot removers, turpentine, waxes and wax removers.
• Do not dry items containing foam rubber (may be labelled latex foam) or similarly textured rubber-like materials on a heat setting. Heated foam rubber materials can under certain circumstances, produce fire by spontaneous combustion.

Safety and Precautions

Caution

• Do not sit on top of the dryer.
• Do not dry clothing with large buckles, buttons or other heavy metal or solid things.
• Install and use in accordance with the instructions found in this user guide.
• Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even after being washed, these items may contain significant amounts of these oils.
• Residual oil on clothing can ignite spontaneously. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat.
• Heat source such as your dryer can warm these items, allowing an oxidation reaction in the oil to occur.
• Oxidation creates heat. If this heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing these kinds of items may prevent heat from escaping and can create a fire hazard.
• Take care that children’s fingers are not caught in door when closing it. This may result in injury.

Warning: Risk of Fire

• Install and use in accordance with the instructions found in this user guide along with your local regulations.
• To reduce the risk of severe injury or death, follow all installation instructions.

OVERVIEW

INSTALLATION

Read the following instructions carefully before installing the dryer. Retain these instructions for future reference.

Caution

• The dryer is not suitable for installation in a mobile home.
• Remove the door from all discarded appliances to avoid the danger of a child being trapped and suffocating, after unplugging cut off Power Cord.

Warning
The improper connection of the equipment grounding conductor can result in the risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is properly grounded. Do not modify the plug provided with your dryer. If it doesn’t fit the outlet, have a proper outlet installed by a qualified electrician.

Warning
Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Do not contact the following parts while the appliance is powered: Main Motor; Cooling Fan.

Location Requirements

• The dryer should be located where there is enough space at the front for loading the dryer and enough space behind for the exhaust system.
• Make sure the room in which the dryer is located has enough fresh air. The dryer must be located where there are no air-flow obstructions.
• The dryer must not be installed or stored in an area where it will be exposed to water and/or weather. The dryer area must be kept clear of combustible materials, gasoline and other flammable vapours and liquids. A dryer produces combustible lint. The area around the dryer should be kept lint-free.

Alcove, Closet or Recessed Installations
WARNING: Avoid installing the dryer in a closet with other fuel-burning appliances, such as hot water systems.

Minimum clearances between adjacent walls and other surfaces:

Undercounter Installation

Stacked Washing Machine and Dryer Installation

Note:
The front of the closet must have two unobstructed air openings for a combined minimum total area of 465 sq.cm with a minimum clearance of 76mm at the top and bottom. A slatted door with equivalent space clearance is acceptable.

Stacking Kit

Components : Tools required:

Installation:

1. Place the Top Panel (A) on top of the washing machine with the handle facing towards the front.
   Note: Ensure the washing machine is level.

2. Align the Top Panel with the left and right sides of the washing machine.
   WARNING: Ensure the Top panel is not hanging over the edges of the washing machine. 

3. Using the Top Panel as a template, mark the 6 locations for the screws on top of the washing machine.

4. Using a Ø3mm drill bit, drill the 6 holes and attach the Top Panel to the washing machine using x6 M4 Screws (C). Note: Ensure that the torque is less than 10nm when tightening the screws.

5. Place the Top Panel Block (F) underneath the rear of the Top Panel. Attach the jack catch of the Top Panel Block to the top of the washing machine. Align the mounting hole of the Top Panel Block with the hole in the Top Panel and secure it place using the M6 Screw (B) and Gasket (D).

6. Adjust the 4 leveling feet of the dryer so there is a 12mm gap.

7. At the rear of the dryer, remove the x2 screws located towards the base of the dryer.

8. Remove the handle from the Top panel (A) and insert the dryer leveling feet into the frame of the Top panel. Once the 2 rear feet are inside the Top panel , carefully push the dryer backwards until the 4 feet of the dryer are completely in the frame. Secure the rear of the dryer to the Top panel using the x2 previously removed screws.

9. Replace the handle onto the front of the Top Panel and secure it in place using x2 M4 Screws (C). Cover the screws using the x2 Screw Covers (E).

10. Check if there are any loose parts or screws. If everything is secure, the stacking kit installation is now complete.

IMPORTANT: The washing machine must be installed on the ground and not on top of a clothes dryer.

Drain System

Accessories :
The following parts are optional depending on your dryer model. If your dryer includes the following parts, it is recommended to wear gloves during the installation of accessories.

Installation:

1. Remove the drain hose from the hose holder. Disconnect the drain hose from the water container inlet. Note: To assure water tightness, there is tension between the drain hose and the water inlet. It will require increased force to remove the drain hose.
2. Connect the drain hose and the External Drain Hose using the Connector.
3. Place the External Drain Hose into either the laundry basin (78cm high max.) or a floor drain. Note: To assure the smooth drainage, ensure the pipe is not bent or sagging.

Level Adjusting

• To ensure that the dryer provides the optimal drying performance, it must be levelled. To minimise vibration, noise and unwanted movement, the floor must be a perfectly level, solid surface.
• Once the dryer is in its permanent operating position, ensure the dryer is level with the aid of a spirit level. If necessary, rotate the adjusting feet until the dryer is level.
• Note: Adjust the leveling feet only as much as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate.

Power Supply

1. Ensure that the voltage of the power supply is the same as the specification listed in this user guide or on the rating plate on the appliance.
2. Do not connect the dryer using a power board, a universal plug or socket, do not use multi-plug adapters and avoid using extension cords.

Final check

• Make sure the dryer is plugged into an electrical outlet and is properly grounded.
• The dryer is levelled and is sitting firmly on the floor.
• Start your dryer to confirm that it runs, heats and shuts off.

BEFORE FIRST USE

1. Leave the dyer to stand for at least 2 hours after transporting.
2. Use a soft cloth to clean the inside drum.
3. Place some clean rags into the drum.
4. Connect the power cord and press the Power button.
5. Select the Refresh programme and press Start/Pause button.
6. After finishing this programme, refer to  “cleaning and care” section of this user guide to clean the filter. Note: During drying, the compressor and the water will generate some noise which is entirely normal.

• Before drying, ensure that the laundry has been thoroughly spun in the washing machine. Higher spin speeds reduce drying time and save energy.
• For consistent drying results, sort the laundry based on fabric type and select the appropriate drying program.
• Before drying, please close zippers, hooks, eyelets, buttons, and tie fabric belts securely.
• Remove any objects from pockets, such as lighters and matches.
• Sew in or remove underwiring from bras before drying.
• Close duvet covers and pillowcases to prevent small items from getting rolled up inside them.
• Keep jackets open and unzip any long zippers to allow textiles to dry evenly.
• Avoid over-drying clothes as excessive drying can lead to increased wrinkling.
• Do not dry items that contain rubber or similar elastic materials.
• Maintain cleanliness in the vicinity of the tumble dryer. Accumulation of coal dust or flour can pose an explosion risk.
• The door should only be opened after the tumble dryer’s program has finished to prevent scalding from hot steam or an overheated drying machine.
• Clean the lint filter and empty the water tank after each use to prevent prolongation of drying time and excessive energy consumption.
• Do not dry clothes that have undergone dry-cleaning processes.

OPERATION

After Drying
Buzzer beeps and “0:00” on display.

Weight of Dry Clothes (per item)

Notes:

• Do not overload than dryer.
• Do not place dripping wet laundry into the dryer. The dryer might get damaged.

Only dry laundry suitable for tumble drying. Always refer to the garment care labels on clothing and linen:

• Suitable for tumble drying
• Normal drying process: Drying in the tumbler is possible under normal load and temperature 80°.
• Mild drying process: Caution is appropriate when tumble drying. Select mild process with reduced thermal action.
• Do not tumble dry: Articles unsuitable for drying in the tumbler

Control Panel

1. Power button: Turns the dryer ON/OFF. If your dryer is on for more than 10 minutes without user input, it automatically goes into stand-by.
2. Start/Pause button: Press to start or pause the program.
3. Program select knob: Different drying cycles can be selected according to the users need and the type of laundry to be dried.
4. The cycle you select determines the heat control for the cycle.
5. Normal, Jeans, Perm Press, Quick Dry, My Cycle, Mixed Load, Heavy Duty, Bulky, Towels, Active Wear, Delicates, sanitize are Sensor cycles.
6. Wool, Air Fluff, Time Dry, Refresh are Manual cycles.
7. Wrinkle care:
8. Press once to add the wrinkle care step into the operating program. Press again to cancel selection.
9. When enabled, it provides approximately 90 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling.
10. The load can be removed at any time during the wrinkle care cycle.
11. Delay: This function is used for delaying drying time within 24 hours. The delay time means the program will start after X hours. When the delay program starts, the time starts to countdown on the display and the delay icon blinks.
12. Time adjust: For Manual program only. Press the Time adjust button to change the drying time you prefer. Push repeatedly to select your desired drying time (120, 90, 60 & 30 minutes).
13. Dryness :
14. Select the dry level (More, Normal, Less, Damp). Different dry level will result in different drying time. For clothes to be ironed manually, a lower dry level should be selected.
15. Press and hold for 3 seconds to save your favourite drying cycle, this cycle will be saved as “My Cycle”.
16. Buzzer: Press to toggle the buzzer On/Off. Your selection will be saved until this button is pressed again.
17. Damp alert: This function is useful when you want to remove garments for ironing. The unit will beep 10 for seconds when the moisture in the clothes is good for ironing. Garments can now be removed. To continue drying the remaining load, press button once. Note: The unit will not stop operating if garments are note removed for ironing.
18. Child lock
19. This dryer features a child safety lock, which can prevent children pressing buttons.
20. When the dryer is running or paused, press and hold the Wrinkle Care and Buzzer buttons at the same time for 3 seconds to activate child lock.
21. When the child lock function is set, the display will show Child lock icon and all buttons are deactivated, except for the Power button.
22. To deactivate the child lock function, press and hold the Anti-Crease and Signal buttons at the same time for 3 seconds.

My Cycle
Used to define and save your favourite program.

1. Select the desired program and any drying options.
2. Press and hold the Dryness button for 3 seconds until the dryer beeps The desired program has been saved.
3. Turn the program select knob to the (My Cycle) position, then you can start your favourite program. If you want to change the (My Cycle) settings, repeat steps 1 & 2.

Selecting a Program

1. When the display screen turns on, rotate the program select knob to select the desired program.
2. Select options (Delay, Time, Intensity, Wrinkle-Care).
3. Press the Start/Pause button.
4. Press the Power button after the programme has completed.

Program Start
The drum will rotate after the program starts. The display will light up and the remaining time will be displayed.

Program End

1. The drum will stop rotating after the program ends. The display will show”0:00″ and LED will illuminate. The dryer will start the (Wrinkle-Care) function if user doesn’t remove the load.
2. Press the Power button after unloading the dryer and disconnect the plug.

Symbols

Program Status

Drying a Load of Laundry

1. Power on the dryer: Press the Power button to power your dryer on.
2. Load your dryer:
3. Place only one load in the dryer at a time.
4. Mixed loads of heavy and light weight fabrics will dry differently, which may result in lightweight fabrics being dry while heavy fabrics remain damp at the end of a drying cycle.
5. Add one or more similar items to your dryer when only one or two articles of clothing need drying. This improves the tumbling action and drying efficiency.
6. Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some fabrics.
7. Select the appropriate program and options for the load:
8. Select the appropriate program using the program select knob according to the program chart.
9. Select the appropriate optional function according to the program chart.
10. Start your dryer:
11. Pressing Start/Pause button will start the selected cycle. To pause cycle press, Start/Pause button then open the door. To resume operation after closing the door press the Start/Pause.
12. Opening the door during the operation will instantly stop operation and will require pressing the Start/Pause button to resume operation.

Program Chart

Note: Settings in the table are default. Optional functions marked ‘Y’ can be selected. For better drying, select a higher dry level.

Load Size Recommendations
For best results, follow the wet load size recommendations noted for each cycle.

For the best performance, the load for each cycle should be recommended as follows:

Unloading your laundry:

• Clean filter flash for 10 seconds.
• The dryer will beep 3 times after the program has finished.
• The filter should be cleaned after every load once the laundry has been uloaded.

Tips:

• Clothes that are easy to be tangled or worn and small pieces, should be placed in the laundry bag to dry.
• Clothes with long belts or ropes should be tied in a knot to dry.
• Clothes with slender buttons should be buttoned up to dry.
• Clothes with zippers must be zipped up and flipped inside out to dry.

CLEANING & CARE

Emptying the Water Tank

1. Remove the water tank with two hands.
2. Pour out the condensate water into a sink.
3. Re-install the water tank.

Notes:

• Empty the water container after each use.
• If the water container is filled completely, the programme will be paused and the ” ” indicator will turn on. After the container is emptied, the dryer can be restarted by pressing Start/Pause button.
• Do not drink the condensate water.
• Do not use the dryer without the water tank installed.

Clean the Filter
This dryer has a primary door lint filter. Ensure the door filter is cleaned after each cycle.

1. Open the door.
2. Remove the filter.
3. Open the filter and remove the fluff on the filter. Rinse the filter with water.
4. Dry the filter thoroughly before reinstalling.

Notes:

• Take notice of the correct orientation before replacing the filter.
• The fluff accumulated on the filter will block the air circulation. Not cleaning the filter regularly will increase drying time and energy consumption.
• Disconnect the power cord before cleaning.

IMPORTANT: Do not operate the dyer without a lint filet in place. Do not use a damaged of broken lint filter. This may reduce the performance and/or cause a fire.

Clean the Base Filter

1. Open the cover.
2. Unlock the 3 locking levers and grasp the filter handle.
3. Remove the base filter and clean it. If there is too much lint on the filter, clean it in water. Dry the filter thoroughly before installing it back.
4. Clean the rubber sealing, both at the filter and handle.
5. Re-insert the filter.
6. Lock the 3 locking levers and make sure that the levers are in correct lock position.
7. Close the cover and ensure it clicks into place.

Notes:

• The fluff accumulated on the filter will block the air circulation. Not cleaning the filter regularly will increase drying time and energy consumption.
• Disconnect the power cord before cleaning.
• Do not operate the dryer without the base filter.
• Clean the base filter after every fifth cycle to prevent fluff accumulation inside the dryer.

Clean the Heat Exchanger

1. At least every 2 months, remove the fluff from the heat exchanger using a vacuum cleaner with a dusting brush attached.
2. Gently clean the heat exchanger without applying any pressure. Otherwise, the heat exchanger could be damaged. The dryer will not dry if the cooling fins are damaged or bent.

WARNING: Do not touch the heat exchanger with your hand, doing so may cause an injury.

Special Laundry Tips

• Follow the care label instructions or dry in Bulky cycle.
• Make sure the item is thoroughly dry before using or storing.
• May require repositioning to ensure even drying.

Blankets|

• Use the Normal cycle and dry only one blanket at a time for best tumbling action.
• Make sure the item is thoroughly dry before using or storing.
• May require repositioning to ensure even drying.

Curtains & Draperies|

• Use the Casual cycle and less dry to help minimi se wrinkling.
• Dry these in small loads for best results and remove as soon as possible.

Cloth Diapers| Use the Normal cycle.
Down Filled Items (jackets, sleeping bags, comforters, etc.)|

• Use the Normal cycle.
•  Add a couple of dry towels to shorten drying time and absorb moisture.

Foam Rubber (rug backs, stuffed toys, shoulder pads, etc.)| DO NOT dry on a heat setting. Use the Air Fluff cycle (no heat).
Warning: Drying a rubber item with heat may damage it or create a fire hazard.
---|---
Pillows|

• Use the Normal cycle.
• Add a couple of dry towels and a pair of clean sneakers to help the tumbling action and to fluff the item.
• DO NOT dry kapok or foam pillows in the dryer. You can dry these items in the dryer ONLY on the air fluff cycle.

Plastics (shower curtains, outdoor furniture covers, etc.)| Use the Air fluff cycle (no heat).

Cleaning the Control Panel

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Do not spray cleaners directly on the panel.
• The control panel finish may be damaged by some laundry pre-treatment, soil and stain remover products. Apply such products away from your dryer and wipe up any spills or overspray immediately.

Cleaning the Drum

• To clean the drum, use a damp cloth with a mild, non-abrasive cleaner suitable for stainless steel and anodized surfaces.
• Remove the cleaner residue and dry with a clean cloth.

Dryer Exterior

• Clean with a soft, damp cloth. Do not use abrasive substances.
• Protect the surface from sharp objects.
• Do not place any heavy or sharp objects or a detergent box on the dryer. Keep them on the purchased pedestal or in a separate storage box. This may scratch or damage the top cover of the dryer.
• Since the entire dryer has a high-gloss finish, the surface can be scratched or damaged.
• Avoid scratching or damaging the surface when using the dryer.

TROUBLESHOOTING

Many malfunctions and faults that might occur in daily operation can be easily remedied. The following guide may help you to find the reason for a malfunction and correct it.

• Make sure the door is latched shut.
• Be sure the power cord is plugged into a live electrical outlet.
•  Check the home’s circuit breaker and fuses.
• Press the Start/Pause button again if the door is opened during the cycle.

The unit won heat|

• Check the home’s circuit breaker and fuses.
• Select a heat setting other than Air fluff.
• Clean the lint filter.
• Dryer may have moved into the cool-down process of the cycle.

Garments not dry|

• Check the entire above, plus.
• Do not overload. 1 wash load = 1 dry load.
• Sort heavy items from lightweight items.
• Large, bulky items like blankets or comforters may require repositioning to ensure even drying.
• Load may be too small to tumble properly. Add a few towels.

The unit is noisy|

• Check the load for objects such as coins, loose buttons, nails, broken zips, etc. Remove promptly.
• It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle.
• Be sure the dryer is levelled properly as outlined in the installation instruction.

The remaining time changes abnormally| The sensor cycle will estimate dampness of clothes automatically. Due to amount and material of clothes, to assure the expected dampness, the dryer will adjust remaining time, this is normal.
Clothes are unevenly dried|

• Seams, pockets and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the Time Dry setting if desired.
• If one heavy item is dried with a lightweight load, such as one towel with sheets, it is possible that the heavy item will not be completely dry when the rest of the load has reached the selected dryness level. Sort heavy items from lightweight items for best drying results.

---|---
Shuts off before load is dry|

• Household odours from painting, varnishing, strong cleaners, etc. may enter the dryer with surrounding room air. This is normal as the dryer draws the air from surrounding air space of the dryer locations.
• When these odours linger in the air, ventilate the room completely before using the dryer.

Odors remain in clothing after refresh| Fabrics containing strong odours should be washed utilizing desired wash cycle.
Garments still wrinkled after Wrinkle-prevent| Small loads of 1 to 4 items work best.
Load fewer garments. Load similar-type garments.
Lint on clothes|

• Lint filter should be cleaned before every cycle. With some loads that produce high amounts of lint, it is necessary to clean the filter after the cycle.
• Some fabrics are lint producers (for example, a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers (for example, a pair of lack linen pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before washing and drying clothes.

illuminated| Clean lint filter.

|

• When the cycle ends for seconds.
• Check the water container. If it’s full, pour out the condensate water and restart the dryer.
• If the container is not full, restart the dryer directly.
•  icon is still flashing after you have finished the first two steps, contact help.Kogan.com for support.

Degree of dryness was not reached or drying time too long|

• Clean lint filter.
• Empty water container.
• Check drain hose.
• Dryer installation place is too restricted.
• Clean the moisture sensors.
• Keep the Air inlet clean.
• Use higher drying intensity level programme or time programme.

---|---

Error Codes

WARNING :

• Only authorised technicians can carry out repairs.
• If any other error code is displayed. Contact help.Kogan.com for support.

Fabric Care Chart

The following symbols provide garment care direction. The clothing care labels include symbols for washing, bleaching, drying and ironing or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximise garment life and reduce laundering problems.

Need more information?

• We hope that this user guide has given you the assistance needed for a simple set-up.
• For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>