VEVOR 71C06F Camper Wheel Chock Stabilizer User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR 71C06F Camper Wheel Chock Stabilizer
USER MANUAL
WHEEL STABILIZER
MODEL: 71C06F
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
OVERVIEW
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Do not over tighten the Wheel Stabilizer. Damage can be done to tires or Wheel Stabilizer. This damage is not covered by the warranty.
- Do not rely on this Wheel Stabilizer as a brake. While it will assist in braking, other independent devices such as blocks or wedges should also be used.
- The performance of the Wheel Stabilizer is dependent on proper trailer tire pressures. Check tire pressures frequently for safety, good tire wear and good chock performance.
- Adhere to all Department of Transportation (D.O.T.) requirements when using this product.
- Use common sense when working. Stay alert and concentrate when setting up and using this product. Never work while under the influence of alcohol, drugs or medications.
- While assembling and using this product keep work area clean and well lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts.
Specifications
| Model Series | 71C06F |
|---|---|
| Structural Style | H |
| Adjustment Range (mm) | 89-305 |
| MEAS(mm) | 425×215×150 |
| Gross Weight (kg) | 4.5 |
Drawing of the Product
Instructions
A. The purpose of the Wheel Stabilizer is to enhance trailer occupant comfort by preventing the tandem wheels from moving. When the wheels are chocked, the annoying rocking motion is essentially eliminated.
B. As Figure 1 shows, this Wheel Stabilizer is to be positioned between the tandem wheels at the wheel center line. It functions by pressing a fixed distance outward (side to side) against the two wheels, locking one wheel to the other. this Wheel Stabilizer is adjustable for tandem wheel spacing from approximately 89- 305mm.
C. The adjustment is accomplished by turning the nut on the threaded rod protruding from the bottom of the unit.
D. As it is shipped, the unit is in its narrowest position and will not function.
E. To adjust the width the first step is to pull the unit apart (wider). The threaded rod will then protrude further, exposing more threads between the chock and the adjusting nut. Hand-tighten the adjusting nut clockwise. Use the ratchet wrench (included) for final tightening.
F. The foot-pads and locking cover may be a little stiff in movement. Working the pieces open and closed over its range a few times will normally correct this.
G. Lubrication on the pivots of the Wheel Stabilizer will enhance useful life.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA,
California, 91730 United States of America
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China
VEVOR
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China
Frequently Asked Questions (FAQ)
Q: How do I know if the Wheel Stabilizer is properly adjusted?
A: The stabilizer should be snugly positioned between the tandem wheels without over tightening, ensuring it prevents rocking motion effectively.
Q: Can the Wheel Stabilizer be used on all types of trailers?
A: The Wheel Stabilizer is designed for trailers within the specified adjustment range. Ensure compatibility before use.
Q: Is regular maintenance required for the Wheel Stabilizer?
A: Regularly check for any signs of wear or damage, and ensure proper adjustment before each use for optimal performance and safety.