VEVOR LSSP-30E RV Surge Protector Instruction Manual

: May 15, 2024
: VEVOR

Table of Contents

VEVOR LSSP-30E RV Surge Protector
Product Information
SPECIFICATIONS AND FEATURES
INSTALLATION INSTRUCTIONS
Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VEVOR LSSP-30E RV Surge Protector

VEVOR-LSSP-30E-RV-Surge-Protector-product

Product Information

Specifications

Model: LSSP-30E
Rated Joule Rating: 4100J
Type: 3 SPD
Operating Voltage: 125V

Frequently Asked Questions

Q: What should I do if the LED indicators show an incorrect wiring condition?
- A: If the GREEN and BLUE LEDs are not both illuminated, refer to the provided diagrams to identify and rectify any wiring issues such as Reverse Polarity, Open Neutral, or Open Ground before connecting your RV.
Q: How can I verify if the Surge Protective Device is providing optimal protection?
- A: Ensure that both the GREEN and BLUE LEDs are lit up before connecting your RV. This indicates the Correct Wiring condition for optimal surge protection.

We continue to be committed to provide you tools with competitive price.

“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.

SPECIFICATIONS AND FEATURES

SPECIFICATIONS

Model	LSSP-30E
Rated	125V
Jopule Rating	4100J
Type 3 SPD

FEATURES INCLUDE

(3) color LED indicator lights
Weather resistant
Limited lifetime warranty
Pull handle on plug
It’s portable, just plug it in

INSTALLATION INSTRUCTIONS

INSTALL STEPS

STEP 1: Plug Surge Protective Device into AC power. DO NOT plug in your RV at this time. Verify GREEN surge indicator LED(s) is on.
STEP 2: Verify which LED’s come on.
- A. The Correct Wiring condition occurs when both the GREEN and BLUE LED’S are on If this does not occur you may be experiencing one of the other three (3) Wiring Conditions as noted in the diagrams:
- B. Reverse Polarity
- C. Open Neutral
- D. Open Ground
  Your Surge Protective Device will continue to work during any of the wiring conditions; however, only the Correct Wiring condition (both GREEN & BLUE LED’s on) is optimal and any other wiring condition should be corrected by Campground Maintenance before use.
STEP 3: Plug in your RV power to the Smart Surge Protector. Refer to
STEP 2: above for surge protection wiring conditions.

LED INDICATORS

VEVOR-LSSP-30E-RV-Surge-Protector-fig-1

Note

The below Green light off indicates a surge occurrence.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, USE ONLY IN DRY LOCATIONS.
Do not install this device if there is not least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel
This device features an internal protection that will disconnect the surge protective component but will maintain power to the load – now unprotected. if this situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device.