RAB A17 FA Area Light Slipfitter Mount Kit Instructions
- June 4, 2024
- RAB
Table of Contents
RAB A17 FA Area Light Slipfitter Mount Kit Instructions
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture.
INSTALLATION
Notice: 90° of angle adjustment.
-
Feed Fixture wires through the Slipfitter Bracket and secure in place with (4) Screws (provided) as shown in Fig. 1.
-
Continue wire feed through the Slipfitter Mount and secure to the Slipfitter Bracket with Locking Bolt as shown in Fig. 2.
-
To adjust Fixture angle, loosen Locking Bolt and set Fixture to desired angle.
-
Tighten the Locking Bolt to set angle.
Easy Answers
rablighting.com
Visit our website for product info
Tech Help Line
Call our experts : 888 722-1000
e-mail sales@rablighting.com
Free Lighting Layouts