Elefesign WF318758AAK Modern Floating Vanity with Ceramic Basin Installation Guide
- June 1, 2024
- Elefesign
Table of Contents
Elefesign WF318758AAK Modern Floating Vanity with Ceramic Basin
Product Information
- Model: WF318758AAK
- Material: Metal
- Dimensions: 850-900mm (height), 305mm (width)
- Hardware: M4 X 14mm screws, M6 X 35mm screws, M6 X 60mm screws, etc.
Product Usage Instructions
Assembly:
- Refer to the assembly instructions provided in the manual.
- Ensure all parts are accounted for before starting assembly.
- Follow the step-by-step guide for proper installation.
Mounting on Wall:
- Mark the location on the wall using a pencil.
- Punch holes as marked for mounting.
- The recommended mounting height is between 85-90cm.
- Use appropriate screws and hardware for wall mounting.
Door Adjustment:
- Loosen the screws to adjust the door up and down to match the cabinet.
- Adjust the door left and right to ensure a suitable crack between the door and cabinet.
- Adjust the door backward and forwards by loosening screws and adjusting the distance between the front and back.
Frequently Asked Questions
Q: What should I do if some parts are missing?
A: Contact our customer service to request replacement parts. Make sure to check all packaging thoroughly before assembly.
Q: Can this product be mounted on a plasterboard wall?
A: It is recommended to mount the product on a solid wall for better stability. If mounting on plasterboard, use appropriate wall anchors for support.
Q: How do I clean and maintain the product?
A: Use a damp cloth to clean the surfaces. Avoid harsh chemicals that may damage the finish. Regularly check and tighten any loose screws for maintenance.
Parts List
Tools And Hardware
ASSEMBLY INSTRUCTION
Step 12
- When the door position is not standard, please adjust the door according to the right picture.
- Please place the cabinet on the flat floor before adjustment.
Adjust the door following the directions.
Adjust the door up and down to match the cabinet.
- loosen the screw.
- Adjust the upper and lower positions.
- tighten the screw.
Adjust the door left and right to match the cabinet for the suitable crack in the door
- loosen the screw to keep the hinge and apply force toward the direction of the arrow.
- tighten the screw to keep the hinge and apply force toward the direction of the arrow.
Adjust the door backwards and forwards to match the cabinet.
- Loosen the screw.
- Adjust the distance between the front and back.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>