EMOOR Wooden Slatted Folding Bed Frame Twin Installation Guide
- May 15, 2024
- EMOOR
Table of Contents
EMOOR Wooden Slatted Folding Bed Frame Twin
ASSEMBLY INSTRUCTIONS
Thank you very much for your purchase. Read all instructions carefully before assembly. Keep this instruction for future reference.
EMOOR Wooden Slatted Folding Bed Frame / Twin size
Model: zd-d-startfb-s
PRODUCT INFORMATION
| Size: | approx. 40.2 x 81.9 x 15.7in (102 x 208 x 40cm) |
|---|---|
| Floor to platform height: | 11.8in (30cm) |
| Platform: | Approx. 35.8 x 78.9in (91 x 200.5cm) |
| When folded: | Approx. 40.2 x 15.9 x 43.3in (102 x 40.5 x 110cm) |
| Material: | Frame: Steel (powder coating), Floor board: Natural paulownia wood |
| Load Capacity: | 200kg |
| Note: | Product specifications are subject to change without notice. |
SAFETY PRECAUTIONS
We do not assume any liability or responsibility for any injury or damage arising from misuse or inappropriate use of the products.
WARNING
- Keep away from flame.
- Do not smoke in bed. It may cause a fire.
CAUTIONS
- Do not use on the tilted floor.
- Direct sunlight or direct heating and cooling air from airconditioner may cause deformation or discoloration.
- Keep away from heat and moisture to prevent rusted screws.
- Ventilate regularly.
- Periodically re-tighten all bolts.
- Be careful not to get injured by the packing materials.
- Domestic use only, not for business, commercial or industrial purposes.
- Do not modify or remodel. It may cause damage or injury.
Additional Information:
- Natural disasters accidents or damage caused by carelessness, improper repair or modification by customers are not guaranteed.
- When using on a floor that is easily scratched or dented, protect the floor before assembly.
- In case of unusual shakes or sounds, stop using.
- If the cause is unknown, contact a vendor.
KEY POINTS
Secure enough space and assemble in the right order.
Do not tighten up each bolt from the first time.
Tighten each bolt temporarily with about 80%, correct distortion, and then tighten up all bolts.
Tighten bolts in a diagonal sequence.
Start tightening any bolt (but not tighten up), and 2nd one should be in a diagonal position. Tighten 3rd and 4th, then back to 1st one and tighten up evenly.
HOW TO CARE
- When cleaning, wipe with a soft cloth tightly dampened with mild detergent and/or water.
- Do not use harsh cleaners or abrasives.
Contact Information
EMOOR Co., Ltd. 1-25-12 Akebonocho Tachikawa Tokyo 190-0012 JAPAN
Customer Support
- Email: cs@emoor.co.jp
- Phone: +81-42-595-6185
- MON-FRI 10am – 4pm (Japan time)
- Website: https://emoor.co.jp/
- Amazon: https://www.amazon.com/emoor
- Facebook: https://www.facebook.com/emoorjapan
- Instagram: https://www.instagram.com/emoor_japan
Parts List
- Center Support Leg x1
- Side Frame A with Casters x1
- Side Frame B with Casters x1
- Side Frame A with Handle x1
- Side Frame B with Handle x1
- Center Crossbar x2
- Foot Frame x1
- Center Support Frame x2
- Head Frame x1
- Head Support Leg x1
- Foot Pipe Bar x1
- Center Slat x1
- Slatted Board (Middle) x4
- Slatted Board (Head/Foot) x2
- Bolt [M] x16
- Nut x4
- Bolt [L] x16
- Frances Nut x8
- Washer x12
- Bolt [S] x10
- Hexagonal Wrench x1
- Spanner x1
- Caster x2
- Spring x2
*The parts other than those indicated are packing materials.
Assembly Instructions
The assembly process is depicted through illustrations and part references. For each assembly step, parts used are listed along with corresponding diagrams displaying the proper assembly method. Diagrams include directional arrows and tools needed for the step. Key reminders include tightening bolts temporarily at first, then tightening them firmly at the end, and the suggestion to always assemble with two or more people supporting it.
Specifications
| Bolt Sizes | Bolt [M] 6mm x 40mm, Bolt [L] 8mm x 50mm, Bolt [S] 6mm x 15mm |
|---|---|
| Tools Included | Hexagonal Wrench, Spanner |
| Preparation | Gloves, Floor Protection Sheet (not included) |
FAQ
- What should I do if a part is missing or defective?
- Contact EMOOR customer support for assistance with missing or defective parts.
- Can the bed frame be used for commercial purposes?
- No, the bed frame is for domestic use only, not for business, commercial, or industrial purposes.
- Is it safe to smoke in bed with this frame?
- No, keep away from flame and do not smoke in bed as it may cause a fire.
- How do I care for the bed frame?
- Wipe with a soft cloth tightly dampened with mild detergent and/or water. Do not use harsh cleaners or abrasives.
- What is the load capacity of the bed frame?
- The load capacity is 200kg.
- How should the bolts be tightened during assembly?
- Tighten each bolt temporarily with about 80% first, correct any distortion, and then tighten up all bolts evenly, following a diagonal sequence.
Installation Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>