EMOOR B0C7KK3YD2 Franco Tower Half Fold Type Slatted Bed Instruction Manual
- June 17, 2024
- EMOOR
Table of Contents
EMOOR B0C7KK3YD2 Franco Tower Half Fold Type Slatted Bed
IMPORTANT
Small parts included. Keep out of reach of small children and pets.
Secure enough space for assembly and cover the floor and furniture around to
prevent scratches or damages.
Assemble the bed with all parts correctly as instructed.
PARTS LIST
Be sure all parts below are included before assembly.
ASSEMBLY INSTRUCTIONS
Thank you very much for your purchase. Read all instructions carefully before assembly. Keep this instruction for future reference.
Paulownia Wooden Slatted Mat [FRANCO TOWER] zd-sunoko-t-s : Twin size
- Material Natural paulownia wood EVA
- Country of Origin China
- Dimensions Twin Size: 37.8×77.5in (96x197cm)
SAFETY PRECAUTIONS
We do not assume any liability or responsibility for any injury or damage
arising from misuse or inappropriate use of the products.
WARNING Failer to follow these warnings and the assembly instructions
could result in serious injury or death.
- Keep away from flame.
- Do not smoke in bed. It may cause a fire.
CAUTIONS
- Do not use on the tiled floor.
- Direct sunlight or direct heating and cooling air from air conditioner may cause deformation or discoloration.
- Keep away from heat and moisture to prevent rusted screws. Ventilate regularly.
- Periodically re-tighten all bolts.
- Be careful not to get injured by the packing materials.
- Domestic use only, not for business, commercial or industrial purposes.
- Do not modify or remodel. It may cause damage or injury.
- Natural disasters or accidents or damage caused by carelessness, improper repair or modification by customers are not guaranteed.
- When using on a floor that is easily scratched or dented, protect the floor before assembly.
- In case of unusual shakes or sounds, stop using.
- If the cause is unknown, contact a vendor.
HOW TO ASSEMBLE
Assemble correctly as instructed below. Assembly by two people is recommended.
STEP 1 Place Slats with the bottom side up, as it is shown in the picture.
STEP.2 Fix the Slats with Connecting Metal Fittings and Allen Bolt.
Fix the Slats with G)Connecting Metal Fittings and @ Allen Bolt, using ® Allen
Key. Note the directions to fix the parts.
With the Connecting position A, please fix the Connecting Metal Fittings from
outside. With the Connecting position B, please fix the Connecting Metal
Fittings from inside Fixing the Fittings from the wrong side may result in not
being able to fold the slats. So please be careful.
Do not tighten up the bolts from the beginning.
Tightening up the bolts from the beginning may cause misalignment of other
bolt holes or overall distortion.
Tighten all bolts temporarily with about 80%, then tighten them over firmly.
Useful Usage
A slatted Mat can be set up to stand and use it for drying a Japanese Futon
Mattress like in the photo.
Fold the slatted mat into a mountainous shape and fasten the Velcro firmly as
shown in the photo.
Spread out the slatted mat until the Velcro is firmly spread.
Place the mattress gently on the slatted mat and hang the mattress in a well- ventilated area.
- DO NOT DRY WET LAUNDRY. AS IT CAN CAUSE MOLD GROWTH.
- DO NOT LET THE CHILD GO INSIDE WHEN IT IS SET UP TO STAND
HOW TO CARE
- When cleaning, wipe with a soft cloth tightly dampened with mild detergent and/or water
- Do not use harsh cleaners or abrasives.
Customer Support
cs@emoor.co.jp (+81-42-595-6185)
- https://emoor.co.jp/
- https://www.amazon.com/emoor
- https://www.facebook.com/emoorjapan
- https://www.instagram.com/emoor_japan