EMOOR Adjustable Recliner Chair for Living Room Brown Instruction Manual

: May 15, 2024
: EMOOR

Table of Contents

EMOOR Adjustable Recliner Chair for Living Room Brown
ASSEMBLY INSTRUCTIONS
PRODUCT INFORMATION
SAFETY PRECAUTIONS
HOW TO CARE
Parts List
Assembly
How to Recline
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EMOOR Adjustable Recliner Chair for Living Room Brown

ASSEMBLY INSTRUCTIONS

Thank you very much for your purchase.
Read all instructions carefully before assembly. Keep this instruction for future reference.

Fab leather upholstered sofa chair LEON/su-809ev

PRODUCT INFORMATION

Dimensions : 600 x 580-950 x 940-1000mm
Materials: Frame: Steel
Inner material: Pocket coil sheet, Urethane foam
Upholstery: I 00% Polyester
Load Capacity: I 00kg
Product specifications can be changed without notice in advance.

SAFETY PRECAUTIONS

We do not assume any liability or responsibility for any injury or damage arising from misuse or inappropriate use of the products.

WARNING
Indicates a potentially hazardous situation that could result in death or serious injury if the product is mishandled.

Do not use a stove or other heater near this product. It may cause a fire.
Please do not use this product in an inclined place, as it is dangerous.
Please avoid direct sunlight or direct exposure to heat from a stove or other source of heat or air conditioning, as this may cause discoloration and damage.
Do not ride on the armrest as it is dangerous.
That may result in malfunction or injury from falling.
Do not use this product for purposes other than chairs.
Do not use this product for any purpose other than its intended use.
Do not step on the armrests as it is dangerous. It may cause an injury due to malfunction or falling.

CAUTION
Indicates a potentially hazardous situation that, if handled improperly, could result in personal injury or property loss.

ventilate the room from time to time. Rust may occur in high temperature and humidity circumstances.
Please be careful not to cut your hands on the edges of the packing material. Please be careful when opening the package.
Do not modify the structure or use of this product without permission. Doing so may cause damage or accidents and is extremely dangerous.
If abnormal shaking or noise is felt, stop using the product immediately and have it inspected.
If the cause is unknown, contact the seller.
To prevent scratches or dents on the floor, be sure to protect the floor before use.
If you are concerned about the smell after unpacking, please place it for a few days in a well-ventilated place in the shade.
Fasteners are necessary for the manufacturing process. Do not open or close them unnecessarily.
We do not guarantee against accidents or damage caused by force majeure such as natural disasters or unauthorized repair or modification.

HOW TO CARE

When cleaning, wipe with a soft cloth tightly dampened with mild detergent and/or water.
Do not use harsh cleaners or abrasives.

Parts List

Make sure that all the parts are included.

Items to be prepared by the customer : Gloves • Floor protection covering sheet

KEY POINTS
Secure enough space and assemble in the right order.

Do not tighten up each bolt from the first time.
Tighten each bolt temporarily with about 80%, correct distortion, and then tighten up all bolts.

Assembly

When assembling, be sure to work in a sufficiently large area and be sure to protect the floor.

Remove 2 Bolts and 3 Washers attached to the main unit using 4 Hex Wrench.
Use the removed 2 Bolts and 3 Washers to fix the body and legs.
Insert 2 Bolts with 3 Washers through 1 CD screw holes on the legs of the desired height.
Temporarily tighten with 4 Hex Wrench.
Then fully tighten after both are temporarily tightened.

Notes on Seat Height Adjustment

If the angle of the receiving nut is off, the bolt does not go in and spin.
In case the bolt is not fixed, adjust the angle with a screwdriver so that the bolt is parallel with the nut.

Legs have front and back sides

The screw holes that fit the bolt’s heads in.
The screw holes that let the bolt’s heads out.

1 Legs have front and back sides. Make sure to attach the legs the front side facing outward. If misattached, the bolts will not be tightened to the end and the height cannot be adjusted correctly.

Please make sure that there is no looseness or rattling of each part before use.

How to Recline

The backrest can be adjusted to the desired angle.
Pull the lever with your back off the backrest, and then slowly apply your weight to the backrest to move the recliner into the desired position.

Cautions for Reclining

Excessive force applied to the backrest may cause the chair to fall over.
When reclining up, be careful that the backrest will return vigorously if the lever is pulled while the body is in an upright position.
When reclining down, never pull the lever with your body weight on it. It is very dangerous as the reclining may fall down vigorously.

Headrest angle adjustment

Angle adjustment is possible. Use both hands when adjusting.