EMOOR TOWER-D Paulownia Wooden Slatted Mat Instruction Manual

: June 16, 2024
: EMOOR

Table of Contents

ASSEMBLY INSTRUCTIONS
SAFETY PRECAUTIONS
WARNING
CAUTIONS
IMPORTANT
PARTS LIST
HOW TO ASSEMBLE
Useful Usage
HOW TO CARE
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EMOOR TOWER-D Paulownia Wooden Slatted Mat

EMOOR TOWER-D Paulownia Wooden Slatted Mat

ASSEMBLY INSTRUCTIONS

Thank you very much for your purchase. Read all instructions carefully before assembly.
Keep this instruction for future reference.

Paulownia Wooden Slatted Mat [FRANCO TOWER] zd-sunoko-t-d : Full size
zd-sunoko-t-q : Queen size

Material
Natural paulownia wood EVA
Dimensions
Full Size: 27.6×77.5in x2 (70x197cm) x2
Queen Size: 31.5×77.5in x2 (80x197cm) x2
Country of Origin
China

SAFETY PRECAUTIONS

We do not assume any liability or responsibility for any injury or damage arising from misuse or inappropriate use of the products.

WARNING

Failer to follow these warnings and the assembly instructions could result in serious injury or death.

Keep away from flame.
Do not smoke in bed. It may cause a fire.

CAUTIONS

Do not use on the tilted floor.
Direct sunlight or direct heating and cooling air from air conditioner may cause deformation or discoloration.
Keep away from heat and moisture to prevent rusted screws. Ventilate regularly.
Periodically re-tighten all bolts.
Be careful not to get injured by the packing materials.
Domestic use only, not for business, commercial or industrial purposes.
Do not modify or remodel. It may cause damage or injury.
Natural disasters or accidents or damage caused by carelessness, improper repair or modification by customers are not guaranteed.
When using on a floor that is easily scratched or dented, protect the floor before assembly.
In case of unusual shakes or sounds, stop using.
If the cause is unknown, contact a vendor.

IMPORTANT

Small parts included. Keep out of reach of small children and pets.
Secure enough space for assembly and cover the floor and furniture around to prevent scratches or damages.
Assemble the bed with all parts correctly as instructed.

PARTS LIST

Be sure all parts below are included before assembly.

Connecting Metal Fittings
Allen Bolt
Allen Key
Velcro tape

HOW TO ASSEMBLE

Assemble correctly as instructed below.
Assembly by two people is recommended.

STEP 1 Place Slats with the bottom side up, as it is shown in the picture.

STEP.2 Fix the Slats with Connecting Metal Fittings and Allen Bolt.

Fix the Slats with G)Connecting Metal Fittings and CI) Allen Bolt, using ® Allen Key.
Note the direction to fix the parts.
With the Connecting position A, please fix the Connecting Metal Fittings from outside.
With the Connecting position B, please fix the Connecting Metal Fittings from inside Fixing the Fittings from the wrong side may result in not being able to fold the slats. So please be careful.
Repeat Step 1 and Step 2 to make two sets of slats.
Do not tighten up the bolts from the beginning.

Tightening up the bolts from the beginning may cause misalignment of other bolt holes or overall distortion.
Tighten all bolts temporarily with about 80%, then tighten them over firmly.

STEP.3 Place the two slats side by side and fix them with (4) Velcro tape as shown in the illustration. Fix them with Velcro tape as shown in the illustration.

Useful Usage

A slatted Mat can be set up to stand and use it for drying a Japanese Futon Mattress like in the photo.

Fold the slatted mat into a mountainous shape and fasten the Velcro firmly as shown in the photo.
Spread out the slatted mat until the Velcro is firmly spread.
Place the mattress gently on the slatted mat and hang the mattress in a well-ventilated area.