nedis SPSB200BK Soundbar with 40 W Peak Power Sound User Manual
- May 15, 2024
- nedis
Table of Contents
Soundbar
With 40 W peak power sound
SPSB200BK
ned.is/spsb200bk
Quick start guide
SPSB200BK Soundbar with 40 W Peak Power Sound
Specifications
Product | Soundbar |
---|---|
Article number | SPSB200BK |
Peak power | 40 W (2x 20W) |
RMS | 40 W (2x 20W) |
Speaker channels | 2 |
Bluetooth® version | 5 |
Bluetooth® frequency range | 2402 – 2480 MHz |
Maximum transmission power | 2 dBm |
Driver diameter | 52 mm |
Connections | Optical Toslink Coax 3.5 mm AUX |
HDMI output (ARC) USB
Power input| 18.0 V DC / 1.5 A
Power input adapter| 100 – 240 v AC 50-60 Hz / 0.8 A
Soundbar
SPSB200BK
For more information see the extended manual online:
ned.is/spsb200bk
Intended use
This product is a soundbar that can be mounted on the wall or placed under
your tv to play audio from your media device via Bluetooth®, audio cable or a
USB device.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
Always store this information with the product for use in the future.
Main parts (image A)
1 USB port
2 AUX input
3 Coax input
4 Optical audio input
5 HDMI input
6 Power input| 7 Mounting holes
8 LED display
9 Control panel
q Mounting screws
w Power adapter
e Optical audio cable (Toslink)
---|---
Control panel (image B)
1 Power/Mode button
2 Play/pause button| 3 Next button/Volume up
4 Previous button/Volume down
---|---
Remote control (image C)
1 Power button
2 Volume up button
3 Previous button
4 Volume down button
5 Music mode button
6 Mute button| 7 Bass down button
8 Mode button
9 Play/pause button
q Next button
w Movie mode button
e Bass up button
---|---
Safety instructions
– WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Do not block ventilation openings and make sure that there is enough space around the product.
- Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
- Before use, always check that the mains voltage is the same as the voltage on the rating plate of the product.
- Unplug the product if you do not plan on using the product for an extended period of time.
Installation to the wall (image D)
- Drill 2 holes, as indicated in image D. Insert plugs into the holes.
- Insert the screws A10 into the plugs.
- Mount the product onto the screws A10 using the mounting holes A7
Connecting the product (image E)
Connect the cables to the product as shown in image E.
Placing batteries in the remote control
- Open the battery compartment on the back of the remote.
- Insert the two required AAA batteries (not included) into the battery compartment.
- Close the battery compartment.
Press and hold the Power/Mode button B1 to switch on the product.
Listening modes
To change listening mode:
- Press the music mode button C5 to optimize the audio settings for listening to music.
- Press the movie mode button C11 to optimize the audio settings for watching movies.
Input modes
To change input mode:
- Press the Power/Mode button B1 or the mode button C8.
Display | Input mode |
---|---|
OPT | Optical input mode |
COA | Coaxial input mode |
HD | HDMI input mode |
AUX | Aux input mode |
BT | Bluetooth input mode |
USB | USB input mode |
Playing music from a digital input source
- Plug the Toslink cable A12 in the optical audio input A4.
- Plug the other end of the Toslink cable into your source device.
- Press the Power/Source button B1 or the mode button C8 until LED display A8 shows “OPT”.
Playing music from a Bluetooth® audio source
- Press the Power/Mode button B1 or the mode button C8 until LED display A8 shows “bt”. Pairing is now active.
- Activate Bluetooth® on your audio source and connect with the product (SPSB200BK).
Playing music from an AUX audio source
- Plug the 3.5 mm audio cable (not included) into the AUX input A2.
- Plug the other end of the 3.5 mm audio cable (not included) into your source device.
- Press the Power/Source button B1 or the mode button C9 until LED display A8 shows “AUX”.
Playing music from an USB flash drive
- Plug the USB storage device (not included) in the USB input A1.
- Press the Power/Source button B1 or the mode button C8 until LED display A8 shows “USB”.
Controlling the video/music
- Press next button C10 (or next button/Volume up B3) or the previous button C4 (or Previous button/volume up B4) to skip between tracks.
- Press the increase volume level button C3 (or next button/Volume up B3) or decrease volume level button C4 (or Previous button/volume down B4) to control the volume.
- Press the pause/play button B2 or the pause / play button C9 to play or pause a track.
- Press the increase bass volume button C12 or the decrease bass volume button C8 to control the bass volume.
- Press the mute button C6 to mute or unmute the sound. You can also control music and volume from your audio source.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product SPSB200BK from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if
applicable) can be found and downloaded via:
nedis.com/spsb200bk#support
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
References
- Soundbar | 2.0 | DSP Programs | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optical / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Mountable | Black
- Soundbar | 2.0 | DSP Programs | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optical / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Mountable | Black
- Soundbar | 2.0 | Programy DSP | 40 W | 1x 3,5 mm / 1x koaxiální zvuk / 1x optický / 1x USB | 1x HDMI (s ARC) | Bluetooth® | Namontovatelné | Černá
- Soundbar | 2.0 | DSP-Programme | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optisch / 1x USB | 1x HDMI (mit ARC) | Bluetooth® | Montierbar | Schwarz
- Soundbar | 2.0 | DSP Programmer | 40 W | 1 x Optisk / 1x 3.5 mm / 1x Coax Audio / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Kan monteres | Sort
- Barra de Sonido | 2.0 | Programas DSP | 40 W | 1x 3.5 mm / 1x audio coaxial / 1x óptico / 1x USB | 1x HDMI (con ARC) | Bluetooth® | Montable | Negro
- Soundbar | 2.0 | DSP | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optinen / 1x USB | 1x HDMI (tukee ARC) | Bluetooth® | Kiinnitettävä | Musta
- Barre de son | 2.0 | Programmes DSP | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optique / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Montable | Noir
- Soundbar | 2.0 | DSP Programmi | 40 W | 1x 3,5 mm / 1x cavo audio coassiale / 1x Ottico / 1x USB | 1x HDMI (con ARC) | Bluetooth® | montabile | Nero
- Soundbar | 2.0 | DSP-Programma's | 40 W | 1x 3,5 mm / 1x Coax Audio / 1x Optisch / 1x USB | 1x HDMI™ (met ARC) | Bluetooth® | Monteerbaar | Zwart
- Soundbar | 2.0 | DSP Program | 40 W | 1 stk. optisk / 1x 3.5 mm / 1x Coax Audio / 1x USB | 1x HDMI (med ARC) | Bluetooth® | Kan monteres | Sort
- Offer to sell domain: nedis.pl
- Soundbar | 2.0 | DSP Programs | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optical / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Mountable | Black
- Soundbar | 2.0 | DSP-program | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optisk / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Monterbar | Svart
- Soundbar | 2.0 | DSP Programs | 40 W | 1x 3.5 mm / 1x Coax Audio / 1x Optical / 1x USB | 1x HDMI (with ARC) | Bluetooth® | Mountable | Black
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>