VEVOR XJC-080-2 Trolley Moves Cars Motorcycles Under Wheels Instruction Manual
- May 15, 2024
- VEVOR
Table of Contents
WHEEL DOLLY
MODEL: XJC-080-2
User Manual 
XJC-080-2 Trolley Moves Cars Motorcycles Under Wheels
Technical Support and E-Warranty Certificate
www.vevor.com/support
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
**[CustomerService@vevor.com**](mailto:CustomerService@vevor.com)
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
**** Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- While assembling and using this product, keep work area clean and well lighted, and keep spectators and children out of the work area.
- Support load by appropriate means after lifting.
- Do not exceed rated capacity.
- Before moving the vehicle, ensure that the vehicle wheels are centered and secure.
- Activate the wheel- and/or caster-locking devices after moving a vehicle.
- Never work on, around, or under a vehicle supported by vehicle-moving dollies.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during use.
- Keep clear of load’s path while placing on and removing from dollies, and while moving.
- Use as intended only. Use only in pairs.
- Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Do not work under vehicle while on Dollies.
- Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
- Before each use, inspect the general condition of the wheel dolly.
- Check for: broken, cracked, or bent parts, loose or missing parts, and any condition that may affect the proper operation of the product.
- After every use, wipe with a clean cloth. Then, store the wheel dolly in a safe, dry location out of reach of children and other non-authorized people.
Specifications
| Model Series | XJC-080-2 |
|---|---|
| Maximum Load Capacity (lb) | 1500 |
| Range of Tyre Width (inch) | 0-12 |
| Net Weight (kg) | 13.5 |
| Gross Weight (kg) | 14 |
Figure of the Product
| Part | Description | Qty |
|---|---|---|
| 1 | Steel main body | 2 |
| 2 | Swivel Caster A | 4 |
| 3 | Swivel Caster B | 4 |
| 4 | Washer A | 8 |
| 5 | Washer B | 8 |
| 6 | Nut | 8 |
| 7 | Wrench | 1 |
Assembly Steps
Instructions
A. Assemble on a flat, level, hard and smooth surface.
B. Once dollies are assembled, roll dollies along surface to verify all
connections are secure and dollies roll freely.
C. Chock opposite end wheels to keep vehicle from rolling.
D. Place dolly in position under raised front or rear wheels and lower vehicle
slowly onto dollies.
E. To move a vehicle supported by four dollies; remove wheel chocks, unlock
casters, and use handles to guide vehicle to location.
F. Lock casters once vehicle is in location.
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
SHUNSHUN GmbH
Roémeracker 9 22021, 76351 Linkenheim-Hochstetten, Germany
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA,
California, 91730 United States of America
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>