Triton Style 2 2-9.5 KW Aspirante I WHITE GLOSS Electric Shower Instructions
- May 15, 2024
- TRITON
Table of Contents
Triton Style 2 2-9.5 KW Aspirante I WHITE GLOSS Electric Shower
Specifications
- Intended for permanent connection to water mains
- Requires regular descaling of the showerhead
- Recommended to use only manufacturer-recommended shower heads
- Double pole isolation switch required for supply disconnections
Operating Guidelines
- Before using the shower, ensure it is not frozen or suspected of being frozen.
- Thaw it out completely before operation. Avoid operating the unit if the shower head or spray hose is damaged.
- Do not restrict the flow of water by placing the shower head directly against your body.
- If water flow ceases during use or if water enters the unit due to an incorrectly fitted cover, stop using the shower immediately.
Restarting the Shower
When restarting the shower immediately after stopping, expect a slug of hot water to be expelled for the first few seconds.
Maintenance
Regularly descale the shower head as per manufacturer guidelines. Fit only recommended shower heads and avoid attaching any devices that may restrict water flow.
Installation Requirements
This appliance must be permanently connected to the water mains and should not be connected via a hose set. Ensure a suitable double pole isolation switch is incorporated in the fixed wiring circuit for supply disconnections as per wiring rules.
Troubleshooting Guide
- WARNING: DO NOT operate the shower if frozen or suspected of being frozen. It must thaw out before using.
- DO NOT operate the unit if the shower head or spray hose becomes damaged.
- DO NOT restrict flow out of the shower by placing the shower head in direct contact with your body.
- DO NOT operate the shower if water ceases to flow during use or if water has entered inside the unit because of an incorrectly fitted cover.
- WARNING: If restarting the shower immediately after stopping, be aware that a slug of hot water will be expelled for the first few seconds.
- The shower head must be descaled regularly.
- Fit only shower heads recommended by the manufacturer and never fit any additional device to restrict the water outlet flow.
- The outlet must not be connected to any tap or fitting other than those specified.
- This appliance is intended to be permanently connected to the water mains and not connected by a hose set.
- A suitable double pole isolation switch for supply disconnections must be incorporated in the fixed wiring circuit per current wiring rules.
- See the Electrical Installation section for further details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>