TRITON ENVi Next Generation Electric Shower User Guide
- May 15, 2024
- TRITON
Table of Contents
TRITON ENVi Next Generation Electric Shower
Product Specifications
- Model Number: 2181684A
- Manufacturer: Triton Showers
- Customer Support: tritonshowers.co.uk/envisupport
- Customer Experience Team Contact: 02476 372 222
Product Usage Instructions
Switching the Shower On
To switch the shower on, follow these steps:
- Touch the circular symbol under the tick to select the desired option.
- Press the Start/Stop icon to return the shower to Standby mode.
Switching the Shower Off
To switch the shower off, make sure to purge it of hot water before turning it fully off.
User Profiles and Personalized Settings
Use the circular symbols under the left and right chevrons to browse through six User Profiles. Select a User Profile by touching the circular symbol under the tick. The shower will automatically adjust the temperature and timer to the personalized settings of the selected profile.
Showering Controls
Adjust the shower temperature using the icons provided. You can also run the shower at ambient water temperature by touching a specific icon. Decrease the shower timer by one minute by touching the corresponding icon.
System Settings and Menu Controls
In system settings, use the circular symbol under the tick to select options. Press the Start/Stop icon to return to Standby mode. Control the showering water temperature through menu controls, including COLD Control and ECO Control.
Frequently Asked Questions
- Q: How do I adjust the shower temperature?
- A: You can adjust the shower temperature by touching the icons provided for temperature control. Use the up and down icons to increase or decrease the temperature.
- Q: Can I save personalized settings for multiple users?
- A: Yes, you can select between six User Profiles, each with its personalized settings. Choose a User Profile to automatically adjust the shower temperature and timer.
- Q: What is Standby mode?
- A: Standby mode is when the shower is not actively running but is ready to be switched on. Press the Start/Stop icon to return to Standby after selecting options or adjusting settings.
Product Overview
System Settings
Touch and hold the Start/Stop icon for five seconds whilst ENVi® is in Standby to enter the System Settings. Touch the circular symbols under the Up and Down chevrons to browse System Settings Menu, and use the circular symbol under the tick to select the option. Press the Start/Stop icon to return to Standby.
Switching the Shower Off
Once the timer has elapsed, or if the Start/Stop icon is touched whilst showering, ENVi® will enter phased shut down, which protects the Tri-HUB by purging it of hot water before turning fully off.
Switching the Shower On
Once Commissioned, and upon connecting ENVi® to power, the Start/Stop icon on the controller is illuminated, touch it to start showering. The shower temperature and timer will be set to their default values.
ENVi® Mode and User Profiles
Touch the circular symbols under the chevrons to browse and the circular symbol under the tick to select between six User Profiles. Upon selecting a User Profile, the shower will automatically adjust the shower temperature and timer to the personalised settings.
Showering Controls
Touch the – icons + to change the shower temperature. Touch the icon to run the shower at ambient water temperature. Touch the icon to decrease the shower timer by one minute
Scan for ENVi® Product Support Page
Or call our Customer Experience team:
- 02476 372 222
Quick-Start User Guide
Documents / Resources
|
TRITON ENVi Next Generation Electric
Shower
[pdf] User Guide
ENVi Next Generation Electric Shower, ENVi, Next Generation Electric Shower,
Generation Electric Shower, Electric Shower, Shower
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>