TRITON NV100 StarStrike 3-18×50 HD Night Vision Rifle Scope and Optical Attachment User Manual

TRITON NV100 StarStrike 3-18×50 HD Night Vision Rifle Scope and Optical

Attachment

Specifications

• Battery: 18650 Rechargeable Lithium Ion
• IR Wavelength: 832~880NM @ 5W
• IR Range: 1000 feet (300M)
• Dimensions: 7.5 x 3.9 x 2.7 (192mm x 100mm x 69mm)
• Weight: 17oz (485g)
• Screen Size: 1.35″
• Resolution: 1920×1080
• Storage: MicroSD
• Focus Range: 15 –
• Frame Rate: 30fps
• Format: MOV

Product Usage Instructions

Battery Installation

1. Remove the battery cover.
2. Insert the battery with the positive end (+) first.

Mounting to a Picatinny Rail

• Install the included mount to the bottom of the Night Vision optic with the 4 included screws.
• Place it onto a Picatinny rail and tighten to 25 lbs/in.
• Press the Crosshair button to add a reticle to the screen.

Mounting to a Scope

• Mount and zero your scope.
• Select the correct Scope Adapter from the four sizes included.
• Fit the adapter over the end of the eyepiece.
• Insert the Night Vision scope into the sleeve and secure it with locking screws.

Focusing
If the graphics on the screen are blurry:

• NV100: Adjust the Diopter Ring until clear.
• NV101: Use the Focus Ring to sharpen the reticle; refocus when changing magnification.

Instructions

• On/Off – Hold the Power button for 1.5 seconds.
• Night Mode – Hold the Left / IR Light button for 1.5 seconds. Press briefly to cycle brightness levels.
• Record – Hold the Up / Record button to start and stop recording.
• Play – Hold the Menu / Play button to load the last video. OK Button plays/pauses, Left rewinds, Right fast forwards. Hold Menu / Play to return to Live Mode.
• Photo – Double-click the Right / Photo button to capture the screen; an icon indicates capture completion.
• Crosshair – Hold the Enter / Crosshair button to activate the reticle; adjust CenterPoint by pressing OK, then Up/Down/Left/Right, and lock by holding OK again.
• Menu – Adjust settings using the Up/Down keys, and save changes with OK, move between fields.
• Digital Magnification – Press Up to increase, Down to decrease.

FAQ

• Q: What should I do if the screen is blurry?
  A: Adjust the Diopter Ring for NV100 or the Focus Ring for NV101 until the image appears clear.

• Q: How do I capture a photo?
  A: Double-click the Right / Photo button; look for an icon at the top of the screen to confirm photo capture.

SPECIFICATIONS

• Battery: 18650 Rechargeable Lithium Ion
• IR Wavelength: 832~880NM @ 5W
• IR Range: 1000 feet (300M)
• Dimensions: 7.5” x 3.9” x 2.7” (192mm x 100mm x 69mm)
• Weight: 17oz (485g)
• Screen Size: 1.35” | Resolution: 1920×1080
• Storage: MicroSD | Focus Range: 15” –
• Frame Rate: 30fps | Format: .MOV

*NV101 Includes a 2x Magnifier that mounts directly into the scope adapter

WARNING:

• Do not look directly at the IR emitter or point at anyone.
• Avoid pointing directly at the sun to prevent damage.
• Turn off IR emitter when not in use.

INCLUDED

Night Vision Optic · Four (4) Scope Adapters · Picatinny Rail Mount · USB-C Cable · 3200mah 18650 Flat Top Rechargeable Battery

QUICK START

Press and hold the Power Button for 1.5 seconds to turn on/off.

BATTERY INSTALLATION

Remove the battery cover and insert the battery positive (+) end first.

MOUNTING TO A PICATINNY RAIL

• Install included mount to the bottom of the Night Vision optic with the 4 included screws.
• Place onto a picnic rail and tighten to 25 lbs/in.
• Press the “Crosshair” button to add a reticle to the screen.

MOUNTING TO A SCOPE:

• Mount and zero your scope.
• Select the correct Scope Adapter. Four different sizes are included. Fit over the end of the eyepiece.
• Insert the end of the Night Vision scope into the sleeve and screw in the locking screws.

FOCUSING:

• If the graphics on the screen are blurry, turn the Diopter Ring until it looks clear.
• NV100 – If the scope reticle is blurry, turn the Focus Ring until the reticle appears sharp. When you adjust your scopes magnification you will need to refocus.
• NV101 – The Focus Ring will focus on the target when the included magnifier is installed

INSTRUCTIONS

• On/Off – Hold the Power button for 1.5 seconds.
• Night Mode – Hold the Left / IR Light button for 1.5 seconds. Press briefly to cycle through the brightness levels.
• Record – Hold the Up / Record button to start and stop recording.
• Play – Hold the Menu / Play button to load the last video. The OK Button plays and pauses the video. Left to rewind, Right to fast forward. Hold Menu / Play to return to Live Mode.
• Photo – Double-click the Right / Photo button to capture the screen. An icon will appear at the top when the image is captured.
• Crosshair – Hold the Enter / Crosshair button to turn on the reticle. The centerpoint can be adjusted by first holding the OK button until it turns black, then pressing the Up, Down, Left and Right buttons to the new centerpoint and locking it in by holding down the OK button again (turns back to red).
• Menu – Adjust settings within the menu by using the Up and Down keys and Pressing the OK button to save your changes and move between fields.

DIGITAL MAGNIFICATION:
This model has a digital magnification feature. To adjust, Press the Up button to increase, the Down button to decrease.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>