VEVOR AQL36-36 Forklift Platform User Manual
- May 15, 2024
- VEVOR
Table of Contents
- VEVOR AQL36-36 Forklift Platform
- Product Specifications
- Product Usage Instructions
- SAFE INSTRUCTIONS
- PRODUCT INTRODUCTION
- PACKAGE CONTENT
- PRODUCT DIAGRAM
- INSTALLATION INSTRUCTION
- OPERATION GUIDE
- TROUBLESHOOTING, MAINTENANCE AND REPAIR
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VEVOR AQL36-36 Forklift Platform
Product Specifications
- Model: 6XSSRUW and (:ZDUUDQW &HUWLILFDWH
- Product Website: https://www.vevor.com
- Dimensions: 25.0 x 7.0 x 3.0 inches
- Weight: 86.5 lbs
- Power Source: $18$
- Compatible with: $4/$4/
Product Usage Instructions
Preparation
To begin using the product, ensure that it is properly assembled and all
components are securely connected. Place the product on a stable surface with
sufficient ventilation.
Powering On
Connect the power source and switch on the product using the designated
power button. Wait for the product to initialize and be ready for operation.
Operating the Product
Use the provided remote control or onboard controls to navigate through the
available settings and functions. Follow the user manual for specific
instructions on different modes and features.
Maintenance
Regularly clean the product using a soft cloth dampened with water or mild
cleaning solution. Avoid using abrasive materials that may damage the surface.
Frequently Asked Questions (FAQ)
-
Q: How do I troubleshoot if the product is not powering on?
A: Check the power source connection and ensure it is secure. Try using a different power outlet to rule out electrical issues. -
Q: Can I use third-party accessories with this product?
A: It is recommended to use only accessories approved by the manufacturer to ensure compatibility and safety. -
Q: What should I do if there is a malfunction during operation?
A: Turn off the product immediately and refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for assistance.
Support and E-Warranty Certificate https://www.vevor.com/support
FORKLIFT PLATFORM
USER MANUAL
Applicable mode l: AQL36-36/AQL45-43
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
FORKLIFT PLATFORM
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFE INSTRUCTIONS
This equipment must be used with care by capable and competent individuals under supervision, if necessary. The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non- economic), and losses of any type, which may occur, and you fully and forever release and discharge VEVOR, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment. VEVOR MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN USE OF THE EQUIPMENT.
WARNING:
- Check whether the screws or pins are loose before use
- The door buckle must be fastened firmly
- The chain shall be fixed
- The safety belt and safety rope shall be fixed
- Minors are not allowed to enter the equipment!
- When working, no one is allowed to stand under the forklift platform
- Do not exceed the load capacity of the forklift platform
Failure to observe these warnings could result in severe injury or death.
CAUTION: carefully read instructions and procedures for safe operations.
PRODUCT INTRODUCTION
| M ODEL SPEC. | AQL36-36 | AQL45-43 |
|---|---|---|
| Product size | L36W36H37 inch | L45W43H80inch |
| Load Capacity | 1200lbs | 1500lbs |
| Fork slot | 6.3*2.55inch | 6.3*2.55inch |
| Floor | Non-slip floor, thickness: 1.5mm | Non-slip floor, thickness: 1.5mm |
| G.W | 73.85lbs | 136.68lbs |
| N.W | 68.34lbs | 130.07lbs |
PACKAGE CONTENT
| MODEL NO. Parts | AQL36-36 | AQL45-43 |
|---|---|---|
| 1 | Forklift Platform*1 | Forklift Platform *1 |
| 2 | Safety Chain * 3 | Elastic Rope with Hook*1 |
| 3 | User Manual *1 |
4″ Swivel Casters2
4″ Directional Casters2
4| /| Iron Basket 1
5| /| Safety Belt1
6| /| Non-Slip Adhesive Strip3
7| /| Safety Chain1
8| /| User Manual *1
PRODUCT DIAGRAM
- AQL36-36
- AQL45-43
| # | Description | Qty | # | Description | Qty |
|---|---|---|---|---|---|
| 1 | Upper guardrail | 1 | 8 | Screw with nut | 8 |
| 2 | Lower guardrail | 2 | 9 | screw | 12 |
| 3 | Side crossbar | 6 | 10 | Screw with nut | 1 |
| 4 | Right mast | 1 | 11 | Screw with nut | 2 |
| 5 | Left mast | 1 | 12 | casters | 4 |
| 6 | Safety latch | 1 | 13 | emergency door | 1 |
| 7 | base | 1 |
INSTALLATION INSTRUCTION
AQL36-36
AQL45-43
- Install the four casters on the base in turn.
- Fix the front side guardrail and safety door on the base.
- Fix the rear safety net on the opposite side of the safety door.
- Connect 6 cross bar tubes to the front and rear guardrails in turn.
- Finally, connect the other safety mesh with the lower mesh, and tighten all bolts.
1.Prepare the components of the iron basket.
| 2.Lock the screw as shown in the picture.
| 3.Lock the four screws as shown in the picture.
---|---|---
OPERATION GUIDE
- Before use, please check whether there is water stain on the skid plate and remove the residual water stain to prevent personnel from slipping. Then check whether all screws on the equipment are loose to ensure safe operation
- Before entering the forklift platform, the personnel shall fix the safety belt and lock the safety lock after entering
- Before lifting the forklift platform, make sure the forklift fork is inserted into the bottom of the platform as shown in the picture.
- Before lifting the forklift platform, make sure that lock the forklift platform and forklift truck with safety chain as shown in the picture.
When lifting and lowering the forklift platform, the speed should be slow to avoid causing damage to it or causing injury to personnel. Minors are not allowed to enter the equipment! This forklift platform can help you complete air missions. Use it to change lights and repair roofs. You can also use it to draw the exterior of a house or to perform tree services. The cage has a baking varnish surface coating, so it can effectively prevent rust and corrosion.
TROUBLESHOOTING, MAINTENANCE AND REPAIR
- Regularly check whether the screws are loose.
- Regularly check whether the coating has scratch on the surface. The collision shall be repaired in time to prevent the product from rusting and corrosion, affecting the safety
- Before each use, check whether the safety buckle can be effectively locked.
Manufacturer: Kunshan qiangjun electronic technology co., Ita
Address:Room 18, No.288, Shipu Lidu Road, Qiandeng Town, Kunshan City
TOUGH TOOLS, HALF PRICE
Support and E-Warranty Certificate https://www.vevor.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>