kogan KAMN27Q18CSA 27 Curved QHD 180Hz 1ms Gaming Monitor User Guide

kogan KAMN27Q18CSA 27 Curved QHD 180Hz 1ms Gaming Monitor

SAFETY & WARNINGS

• Read all instructions before using the appliance and retain for reference.
• Unplug the monitor before cleaning it.
• Use a clean, slightly dampened cloth to wipe the main monitor body.
• To clean the screen, turn it off unplug it and wait for it to cool completely, then wipe it with a dry micro-fibre cloth.
• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

COMPONENTS

• Monitor
  

• Stand connector

• Stand base

• Stand base screw (M4 x 10mm, x2)

• VESA screws (M4 x 10mm, x4)

• DisplayPort cable

• Power Adapter

• User guide
  

OVERVIEW

Monitor Controls

1. Power button
   a. press and hold the “OK key” for 6 seconds to turn on and off.
   b. When the display is turned on, click “OK” to wake up the main menu for one second.
   c. Select “direction key” to select the items to be adjusted up and down in the main menu. Aer selecting the items, click “OK” to adjust. Click “OK” again to save and return to the upper menu.
   
   Monitor Ports

2. Power port (DC 12V)

3. HDMl2 connector

4. HDMl1 connector

5. DP2 connector

6. DP1 connector

7. AUDIO OUT
   

STAND ASSEMBLY

WARNING: The panel of the monitor is fragile.Keep the foam underneath the monitor screen while assembling the stand.

1. Carefully remove the monitor, stand connector and stand base from the box.
   

2. Attach the stand base to the stand connector using the M4 screw provided.
   

3. Insert the connection block into the back cabinet and push down until 1irmly connected.
   

4. Lift monitor up straight and remove the bottom foam. Stand the monitor up on the installed base.
   

VESA MOUNT

VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount or mounting accessories are NOT included.

1. Open the box, take out the monitor with protection form attached and gently place it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.
   

2. Assemble the mount as per the instructions provided with the mount.
   

CONNECTIVITY

Power cable

Connect the included Power Adapter to the monitor power port, then connect the other end to a power outlet.

Earphones (Audio Out)

Earphones, headphones or other audio devices can be connected to the 3.5mm output on the monitor. The monitor may need to be set as the PC’s default sound output device.

HDMI

In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.

DisplayPort

In order for the monitor to receive DisplayPort signals from the computer, use the DisplayPort cable to connect the monitor to the computer.

OPERATION

1. Connect the monitor to the input device via HDMI/ DisplayPort.
2. Connect the power cable to the monitor, then connect the other end directly to a power socket.
3. Use the power button to turn the monitor on.

FreeSync

• In order to use this feature, ensure your hardware has FreeSync capability and the graphics drivers are fully up to date.
• After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu.
• See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on the screen after turning on the monitor and pressing the “OK key” button.

When using the monitor for the first time, it will configure optimal settings automatically.

1. Press ” OK key “touch right to activate the navigation window.
   

2. Press” OK key ” to enter the OSD menu.
   

3. Select ” direction key” to select the items to be adjusted up and down in the main menu. After selecting the items, click” OK key ” to adjust. Click” OK key ” again to save and return to the upper menu.

Refer to the following pages for a detailed list of the OSD menu functions.

colour configuration (USER)
Warm
Cool
USER
Red| -0-100| Adjust red value (USER mode only)
Green| -0-100| Adjust green value (USER mode only)
Blue| -0-100| Adjust blue value (USER mode only)
| Language| English,| Set OSD language
OSD H-Position| 0-100| Adjust OSD horizontal position
OSD V-Position| 0-100| Adjust OSD vertical position
OSD Transparency| 0-100| Set OSD overall transparency
OSD TimeOut| 5-60| Set how long the OSD remains open after last input
| Input Source| Auto Source/DP2/DP1/ HDMl1/HDMl2| Select input source or allow manual selection
Mute| ON/OFF| Enable or disable monitor speaker output
Volume| 0-100| Adjust monitor speaker volume
Reset| I| Upstate monitor firmware via USB flash drive.
| Aspect Ratio| Wide Screen| Select the display’s aspect ratio
4:3
1:1
Auto
Low blue Light| Off| Blue light reduction adjustment
Low
Medium
High
Max High
Response Time| On/Off| Enable or disable overdrive for faster response time
FreeSync| On/Off| Enable or disable AMO FreeSync
HOR| On/Off/Auto| Enable or disable HOR
MPRT| On/Off| when the refresh rate reaches 85Hz can MPRT be turned on.

ECO MODES

1. Press” OK key” touch left button to switch ECO modes. These modes include STANDARD, PHOTO, GAME, MOVIE, FPS, RTS, sRGB and can be used to optimise settings according to your activity. Standard mode is suitable for most activities.
   

SPECIFICATIONS

Audio
Speakers| YES
Audio out| YES
Accessories
Power adapter| YES
DisplayPort Cable| YES
Additional functions
Low Blue Light| YES
Flicker Free| YES
Physical dimensions
Dimensions (w. Stand)| 614.1×463.7×202.9 (mm)
Dimensions (w/o Stand)| 614.1×364.3×88.3 (mm)
Net weight| 4.7 kg
Gross weight| 6.4 kg

CUSTOMERS SUPPOER

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

References

• GAN | Delivering your Business Online
• Kogan Help Centre
• JGAN.com is for sale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>