MyTana UVR-CB Digital Video Recorder User Guide

: May 15, 2024
: MyTana

Table of Contents

UVR-CB Digital Video Recorder
Specifications:
Product Usage Instructions:
Inspecting and Setting Up:
Mounting the UVR:
Getting Started:
Recording Video:
Audio Recording:
Taking Still Shots:
Wireless Streaming:

UVR-CB Digital Video Recorder

“`html

Specifications:

Model: UVR
Connectivity: WiFi and USB
Compatibility: Works with MyTana’s analog inspection
systems
Microphone: Built-in
Ports: USB Ports
Mounting: UVR-M fits Mid-Size and MSA Systems, UVR-CB fits
ACB13 or CBX15
Power: 12V DC

Product Usage Instructions:

Inspecting and Setting Up:

Inspect the UVR upon receipt for any damage.
Ensure the unit fits your Inspection System.
Connect the UVR to your phone or tablet via the Viewer
APP.

Mounting the UVR:

For UVR-M:

Mount to the front or side of the frame with 4 bolts.
Jacks will be underneath to protect from splashes.

For UVR-CB:

Slide into the control box horizontally and connect directly to
the jacks.

Getting Started:

Connect the DVR to the camera’s Control Box using RCA
cables.
Connect the power cord to the 12V DC OUT port on the Control
Box.
Turn on the camera and wait for the MyTana logo to appear on
the screen.

Recording Video:

Push REC/PAUSE on the Control Panel.
Select the drive to record to: Internal, External, or Both
using arrow buttons.
If using an external drive, insert a USB flash drive into the
USB port.
Start recording by pushing MENU/OK. A red dot appears on the
screen indicating recording.
To stop recording, push STOP/BACK.

Audio Recording:

MUTE is default for recording. To record sound:

Push UNMUTE to activate the built-in microphone.
Remove WiFi router to prevent sound interference during
recording.

Taking Still Shots:

To capture still shots:

Press the SCREEN SHOT button (not available during video
recording).

Wireless Streaming:

Refer to Viewer APP instruction sheet for WiFi operations.

Frequently Asked Questions (FAQ):

Q: How do I change the default file naming in the UVR?

A: You can customize file names in the Overlay menu. Refer to
the manual for detailed instructions.

Q: Can I move recordings between different drives on the

UVR?

A: Yes, you can copy or move recordings to a different drive
using the File Management menu selections. Check the next page in
your manual for guidance.

Q: How do I know if sound is being recorded during video

capture?

A: The default setting is MUTE. To record sound, press UNMUTE on
the Control Panel. Remember to remove WiFi routers to avoid
interference during recording.

“`

UVR User Guide

Please read these instructions and do a TEST RECORDING before you perform your first inspection in the field.
Inspect your UVR carefully upon receipt. Let us know right away of any damage you note. ** Make sure the unit you received fits your Inspection System
Included: · Removable USB (flash) drive · Router (dongle) to enable
WiFi connection to your phone or tablet via our Viewer APP
Plugs in to USB port. See separate instructions
for WiFi recording using the MyTana Viewer APP · RCA Cables (IN to OUT / OUT to IN) · Power cord (connect to 12V DC OUT port)

MyTana has developed this UVR to bring digital (WiFi and USB) recording to customers with our older analog inspection systems.

Microphone

USB Ports

USB Ports
UVR-M Fits our Mid-Size and MSA Systems designed to mount vertically — jacks will be underneath, to protect from splashes.
Mount to the front or side of the frame with 4 bolts.

Microphone
UVR-CB Fits our ACB13 or CBX15
Control Boxes designed to slide in to control box horizontally and connect
directly to the jacks

GETTING STARTED
1. Connect the DVR to the camera’s Control Box with the RCA cables and corresponding jacks: connect IN to OUT / OUT to IN
2. Connect the power cord to “12V DC OUT” port on bottom of the Control Box
3. Push the camera Power ON — give the unit 30 seconds to fully boot up. Wait for MyTana logo to appear on screen.

Use these CONTROL PANEL buttons for recording and
working with files. See next pages.

100623
Manufacturers of Quality Sewer and Drain Cleaning Equipment since 1957

www.MyTana.com
746 Selby Ave · St. Paul, MN 55104 fax: 651-222-1739

800-328-8170
Factory Direct Customer Service M F 7am 5pm CST Competent · Polite · Clear

PG 2 MyTana UVR DIGITAL VIDEO RECORDER User Manual

Operating the System

BASICS

We strongly recommend doing a test recording BEFORE you perform your first inspection in the field.

FILES — In this manual, the term “Files” refers to your recordings, whether video (.mp4) or snapshots (.jpg)
File Naming: By default, recording files are named with the date (YYYYMMDD) and a numbering sequence (-XX)
ex: 20180205-02.mp4 This would be the third video recorded on Feb. 5, 2018
the first file will be “20180205-00.mp4” the second “20180205-01.mp4”, etc.

You can also customize the names of files in the Overlay menu, see next column.

STARTUP — Push the POWER on. Blue light around switch will glow. Wait about 30 seconds for MyTana logo to appear.

RECORDING VIDEO

1. Push REC/PAUSE

2. Use the Control Panel arrow buttons

to choose

the drive you want to record to: Internal, External or Both.

If external, be sure to insert USB (flash) drive in USB port.

You can copy or move recordings to a different drive later. (see File Management menu selections next page)

3. Push MENU/OK to start recording. Red dot appears on screen and timer will start.

4. Push STOP/BACK to stop recording.

AUDIO
MUTE is the default setting for recording, meaning NO sound will be recorded (MUTE is ON if you see “MUTE” on the screen). NG units have no speaker for playback, so sound can only be heard when playing back on a computer.
To Record Sound
Push UNMUTE and “MUTE” will disappear from the screen, the built-in microphone is now active.
Remove the WiFi router to prevent sound interference if recording to either Internal drive or external USB drive

TO TAKE STILL SHOTS
Press the SCREEN SHOT button if you want still shots, (not available while recording video)

WIRELESS STREAMING
See our Viewer APP instruction sheet for WiFi operations.

Screen Menus

MAIN MENU
Push MENU/OK on the control panel to bring up the Main Menu on the screen.

= = Menu = =
Play Video
View snapshots Overlay

Use the arrow buttons on the control panel to move the cursor

File management Setup

to select any menu item.

see overview of each

Press STOP/BACK repeatedly to exit

menu item below

any menu and return to previous screens.

Play Video
View recordings by selecting the drive that you recorded to, Internal or external. See column at left for file naming information. Use the buttons on the control panel to FAST FORWARD or REWIND during playback.
View Snapshots
View your static (.jpg) images. See lower left for instructions on how to take still shots.
Overlay (see insert or online)
Lets you to add, change or move the overlays that appear on your videos or images.
Most tasks require a USB Keyboard to be connected to one of the USB ports. See insert or online (QR code)
File Management (see next page and back)
This is the menu where you will work most with your files. You can copy, move, or delete files.
Setup
Lets you change the time and date in the unit. Your unit will arrive preset. If you wish to reset or change the time:
Select Setup, then MENU/OK Select Set Date/Time, then MENU/OK Use and MENU/OK to set the date and time Push STOP/BACK repeatedly to exit menus You can change the time format in the Overlay Menu, see insert.

PG 3 MyTana UVR DIGITAL VIDEO RECORDER User Manual

FILE MANAGEMENT MENU PG 1
If an external (flash) drive is NOT inserted in one of the USB ports, this menu will show and you can only delete individual files from the internal drive.

more File Management menu items on back
= = File Management = =
Delete files from internal Select files : Individual

When a USB flash drive is inserted into one of the ports, there will be new options to copy (or move) files from one drive to the other, and you will be able to work with a group of files.
The default menu gives options to Copy or Delete files from the either the internal or external drive.
You can change the COPY option to MOVE ( read caution below ) Use the buttons to move the cursor to

Toggle Copy or Move Press MENU/OK
Menu items will now say “Move video from…” etc. Press STOP/BACK to return to previous screen.
CAUTION!
COPYING files duplicates file(s) from one drive (internal or external) to the other.
u The file(s) remain in the original location Recommended
MOVING files transfers file(s) from one drive (internal or external) to the other.
u The file(s) are then automatically deleted from the original location. Do this procedure with care

= = File Management = =
Copy video from internal Copy video from external Copy snapshots from internal Copy snapshots from external Delete files from internal Delete files from external Toggle Copy or Move Select files : Individual
The default menu is also setup to work with a single file (Individual)
You can change INDIVIDUAL to GROUP so you can select multiple files to work with at the same time
Use the buttons to move the cursor to

Select Files: Individual
Press MENU/OK Menu changes to “Select Files: Group”
Press STOP/BACK to return to previous screen.

FIRMWARE VERSIONS These instructions are current for MyTana Firmware ver. 1755. Older versions may have slightly different options in the screen menus. To find your system’s version, follow this path:
Main Menu > Setup > System Information > Firmware

PG 4 MyTana UVR DIGITAL VIDEO RECORDER User Manual

FILE MANAGEMENT MENU PG 2

continued from inside

TO COPY/MOVE OR DELETE FILES

There must be a flash drive inserted in the USB port to Copy or Move files. Read information in previous section (left) before doing these procedures.

Copying/moving files from a selected drive (internal or external) automatically chooses the other drive as the destination.
Use the buttons to move the cursor (>) to the procedure you want to do
Press MENU/OK
Your list of files will appear for selection.

= = File Management = =
Copy video from internal

Copy video from external
Copy snapshots from internal Copy snapshots from external Delete files from internal Delete files from external Toggle Copy or Move
Select files : Individual

Selecting an Individual file: (default)
Use the buttons to move the cursor to the file you want to Copy/Move or Delete Press MENU/OK File will automatically Copy/Move or be Deleted.
**Remember: if you MOVE a file, it will automatically be deleted from the original location (see CAUTION, opposite page).
Press STOP/BACK repeatedly to exit menus.

To select a GROUP of files:
Be sure the Menu shows “Select Files: Group” (see “change Individual to Group” left)
Use the buttons to move cursor to the first file you want to work with
Press MENU/OK File will be selected as indicated by [x] Move cursor to the next file Press MENU/OK Repeat until you have selected all the jobs you wish to work with
Press STOP/BACK A screen will appear to confirm selections, it also gives options to Change the selection or Cancel the process.

= = Copy video from internal = =
[ ]20100425-03.mp4 5.30 MB [ ]20100425-02.mp4 2.94 MB > [ ]20100425-01.mp4 6.34 MB [ ]20100425-00.mp4 4.94 MB
= = Copy video from internal = =
[ ]20100425-03.mp4 5.30 MB [ ]20100425-02.mp4 2.94 MB [ x ]20100425-01.mp4 6.34 MB > [ ]20100425-00.mp4 4.94 MB
= = 3 files selected = =

Copy files Change selection Cancel

Press STOP/BACK to apply the function and return to previous screens.

800-328-8170 | MyTana.com | EMAIL mytana@idexcorp.com

youtube.com/videoMyTana

MF | 7a – 5p CST

MYTANA LLC 746 SELBY AVE · ST. PAUL, MN 55104

INSERT 1 MyTana UVR DIGITAL VIDEO RECORDER User Manual

OVERLAY MENU PG 1

These instructions are available online at mytana.com/using-a-usb-keyboard- withmytana-cameras/

The Overlay menu lets you edit the text field overlays that appear on your videos or images. You can also change the time format of the time/date stamp. Most tasks require a USB Keyboard Connect the keyboard to one of the USB ports on the front of the camera.

continued on back
Tasks that do not require a keyboard are indicated >>

WORKING WITH CUSTOM TEXT

Adding Custom Text
Replaces date/time stamp at bottom of screen Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Set Up Primary Overlay, then MENU/OK Select Custom Text, then MENU/OK 5 custom text lines appear, select one then push MENU/OK
Each selection allows 2 lines with 20 characters each You can enter all 5 custom names while you are here, or just one at a time Push STOP/BACK repeatedly to return to the Main Screen
Reposition Custom Text on the screen
Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Set Up Primary Overlay, then MENU/OK Select movement you need, then
press MENU/OK repeatedly until the title is in the desired location. Use the buttons to toggle between the movement choices Push STOP/BACK repeatedly to return to the Main Screen
Delete Custom Text on a job
Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Set Up Primary Overlay, then MENU/OK Select Custom Text, then MENU/OK Select custom text to remove,
then MENU/OK Use backspace or Delete/Back keys to delete the title, then
MENU/OK
Push STOP/BACK repeatedly to return to the Main Screen

Replace Custom Text with the time/date stamp

Push MENU/OK on control panel to access the Main Screen

Select Overlay, then MENU/OK

Check that Primary Overlay at the top of the Overlays menu has 16 x 16 showing.

16 x 16 is the display size of the time stamp

= = Overlays = = > Primary Overlay: 16 x 16
Set Up Primary Overlay

8 x 13 will also

Secondary Overlay

show the stamp but very small

None will display nothing and the following steps won’t work

Press the MENU/OK while the arrow is next to Primary Overlay to toggle between these… once it says 16×16, continue on.

Select Set Up Primary Overlay (2nd menu item) then MENU/OK
Select Text , then MENU/OK Select ^d^t , then MENU/OK
Time/date stamp will display with CURRENT time/date

Push STOP/BACK repeatedly to return to the Main Screen

Find jobs with Custom Text
Push MENU/OK on control panel to access Main Screen
Select Overlay, then MENU/OK
Select Set Up Primary Overlay , then MENU/OK
Select Custom Text, then MENU/OK Choose the job you want to record that you have already
named, then MENU/OK
To display text, push MENU/OK
Push STOP/BACK repeatedly to return to the Main Screen and continue with recording

INSERT 2 MyTana UVR DIGITAL VIDEO RECORDER User Manual

OVERLAY MENU PG 2
continued from other side

WORKING WITH CUSTOM TITLES

CHANGE A FILE NAME

Entering a Custom Title
Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Secondary Overlay, then MENU/OK Select Title, then MENU/OK Enter your title using the keyboard. If a 2nd line is needed,
push MENU/OK to move cursor to the second line for typing Push STOP/BACK repeatedly to return to
the Main Screen
Reposition Title on the screen
Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Title Overlay, then MENU/OK Select movement you need, then
press MENU/OK repeatedly until the title is in your desired location Use the buttons to toggle between the movement choices Push STOP/BACK repeatedly to return to the Main Screen
Remove a Title
Push MENU/OK on control panel to access the Main Screen Select Overlay, then MENU/OK Select Title Overlay, then MENU/OK Select Edit Text, then MENU/OK Use backspace or Delete/Back on
the keyboard to delete the title, then MENU/OK Push STOP/BACK repeatedly to return to the Main Screen

Replaces the default file name (ex: 20171116-01.mp4) with your own text. Consider using what you use for Custom Title or Custom Text.
File names appear on your USB drive lists, or will display in Play Video Screen
Push MENU/OK on control panel to access the Main Screen Select File Management, then MENU/OK Select Rename, then MENU/OK Select Internal, External or Both, then MENU/OK Rename files
**Important Type in .mp4 at the end of the file name for videos, or .jpg at the end of the file name for snapshots be sure to include the . (dot) Press MENU/OK Push STOP/BACK repeatedly to return to the Main Screen
CHANGE TIME FORMAT
Select Overlays, then MENU/OK Select Primary Overlay, then MENU/OK Select Time Format, then MENU/OK There are 7 options to choose from,
Select HH:MM AM/PM, then MENU/OK Push STOP/BACK repeatedly to return to the Main Screen