VEVOR Vinyl Cutter 53 Inch Vinyl Cutter Machine User Guide

VEVOR Vinyl Cutter 53 Inch Vinyl Cutter Machine

Specifications

• Model: KH, KI, EH, SK
• Max. Feeding Width: 375mm, 720mm, 870mm, 1350mm
• Max. Cutting Width: 285mm, 630mm, 780mm, 1260mm
• Cutting Thickness: 1mm
• Speed/Pressure: 20-800mm/s, 20-500g
• Buffer: 1-4M
• LCD Display: CN/EN Support
• Real-time Speed Adjusting: Yes
• Interface: COM+USB Support
• Re-cutting Function: Yes
• Re-cutting Accuracy: 0.127mm
• Resolution Ratio: 0.0245mm/step DMPL/HPGL
• Language Format: Support
• Voltage: AC85-264V

Product Usage Instructions

Precautions

1. Protective material must be removed before turning on the cutting plotter.
2. Check the label on the back side of the plotter to confirm the rated voltage matches the power base.

Main Parts Introduction
Technical Parameters
Accessory Box Contents

• Cutting plotter x1

FAQ

• Q: What should I do if there is an abnormal sound after powering on the machine?
  A: Turn off the power immediately and contact the after-sales department for feedback.

Precautions

1. Protective material must be removed before turning on the cutting plotter.
2. Check the label on the back side of the plotter to confirm that the rated voltage required by the plotter matches the voltage of the power base.
3. Firstly make sure that the power switch is off, then plug the power supply into grounded power outlet.
4. Please do not touch the power cord with wet hands to avoid electric shock.
5. Please only use the power cord, data cable provided with this product, or manufacturer-approved replacements.
6. Please do not drop metal objects and liquids into the machine to avoid malfunction.
7. After shutting down, you must wait another 5 seconds to turn on the cutting plotter again, otherwise it will cause damage to the cutting plotter.
8. In thunderstorms, turn the power switch to OFF and unplug the power cord.
9. Please do not privately change the manufacturer’s components.
10. Manufacturer reserves the right to change product specifications without prior notice.
11. The manufacturer only bears the legal obligations of the product itself sold to the users, and does not bear other losses caused by the malfunction of the products.
12. Without our company’s permit, no part of this manual can be copied or transmitted in any name.
13. Do NOT drag the carriage by hand.
14. If there is an abnormal sound after powering on the machine, please turn off the power immediately and contact the after-sales department for feedback.

Introduction for main parts

KH Model

Left side

Right side

11.Power connection

12.Fuse holder
13.Power switch
14.USB port
15.COM port

KI Model

Left side

Right side

11.Power connection

12.Fuse holder
13.Power switch
14.USB port
15.COM port

EH Model

Left side

Right side

11.Power connection

12.Fuse holder
13.Power switch
14.USB port
15.COM port
16.U-disk port

SK Model

Left side

Right side

11.Power connection

12.Fuse holder
13.Power switch
14.USB port
15.COM port

Technical parameters

Model
Item| 375| 720| 870| **** 1350
---|---|---|---|---
Max. feeding width| 375mm| 720mm| 870mm| 1350mm
Max. cutting width| 285mm| 630mm| 780mm| 1260mm
Cutting thickness| ≤1mm
Speed/Pressure| 20-800mm/s      20-500g
Buffer| 1-4M
LCD display| CN/EN
Real-time Speed adjusting| Support
Interface| COM+USB
Re-cutting function| Support
Re-cutting accuracy| 0.127mm
Resolution Ratio| 0.0245mm/step
Language format| DMPL/HPGL
Voltage| AC85-264V

Accessory box

| Item| Quantity| Unit
---|---|---|---
1| Cutting plotter| 1| Set
2| Power supply cable| 1| Pc
3| Blade| 1| Box
4| Blade holder| 1| Pc
5| Pen holder| 1| Pc
6| Ball pen core| 1| Pc
7| COM connection cable| 1| Pc
8| USB cable| 1| Pc
9| Spanner| 1| Pc
10| USB driver| 1| Pc
11| Bracket screws| 1| Bag
**** To protect the machine, use only the accessories in this accessory box

Bracket assembly diagram

Iron bracket assembly diagram

1. Right column 1pc
2. Left column 1pc
3. Paper roller 1pc
4. Beam 1pc
5. Foot 2pcs
6. M6*40 Hex bolts 8pcs

Al bracket assembly diagram

1. Left column 1pc
2. Beam 1pc
3. Paper roller 2pcs
4. Right column 1pc
5. Paper holder 2pcs
6. Foot 2pcs
7. Screws 6 sets
8. Screw sleeve 4 sets
9. Self-tapping screw 4*16 4pcs
10. Self-tapping screw 4*40 8pcs

Al bracket assembly diagram

1. Self-tapping screw 4*16 Gpcs
2. Self-tapping screw 4*40 8pcs

Control buttons description and operation instructions

Blade assembly

1. Assembly the blade into holder, see as below:
   (Appearance view) (Exploded view)

2. Loosen the blade adjustment nut and rotate the shank to adjust the length of the exposed blade tip. Determine the tip length according to the thickness of the material.

Correct

Blade tip is too long

Blade tip is too short

1. Press the pressing rod when you want to change blade. Take out the blade when it is exposed.
2. Assembly the blade holder into wagon:
   • Loosen the fixed screw on tool holder
   • Put the blade holder into tool holder
   • Tighten and fix the blade holder when it arrives to correct position

Tips:
Do not touch the blade tip by finger, otherwise, your finger will be injured and the tip will be blunt.

Software and driver installation

1. Open the software box (pic 1), take the disk and put it into CD optical drive
2. Open the computer, double click or right click optical drive to install the software.
3. After opening optical drive, click Install Software

Default installation path, click next

Select machine model

Activation successful, exit

Connection of software and machine

1. Open the software, select cut content, and click send to the cutting plotter

Click the cutter icon in the red box

Graph-cut software operation instructions select the cut file and click Cut

Artcut software operation instructions select the cut file and click Cut

Please click cut after follow the below settings

Complete the cutting

Note: Specific operation can refer to USB flash drive operation video, including as follows

1. Ordinary cutting video
2. Automatic contour video
3. Automatic deviation correction video
4. Software installation video

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>