FAME AUDIO MT-Series Multimedia Passiv Speaker User Manual

MT-Series Multimedia Passiv Speaker
User Manual

MT-Series Multimedia Passiv Speaker

• 6/2020
• PAH0002468-000 MT-118B
• PAH0002483-000 MT-218B
• PAH0009579-000 MT-15 MKII
• PAH0021535-000 MT-115B

Important safety instructions! Please read before connection!

DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective devices or housing parts. If this is the case, the device must not be used! Leave maintenance and repair work to a qualified service workshop or contact your dealer. In the case of a malfunction of the device, operation must also be stopped immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it must be replaced immediately with an original spare part from the manufacturer.
Always make sure that the grounding of the device is maintained. Only use the supplied power cables and always maintain the earthed protective contacts on the side. Make sure that the sockets used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out of the reach of babies and children due to the risk of suffocation. Ensure that children never use the appliance unattended! In addition, make sure that children do not remove (small) parts from the device, as they could suffocate by swallowing parts!
DANGER! (Hearing damage)
Professional speaker systems are able to generate harmful sound levels. Even the influence of seemingly harmless sound levels over a longer period of time can lead to permanent damage to the hearing (from approx. 95 dBA SPL).
Therefore, always wear professional hearing protection (earplugs or capsule ear protectors) during operation!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C. Ensure that the unit is placed in a well-ventilated location away from direct heat sources, naked flames, combustible materials, and liquids. A minimum distance of  1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.
Hint! (Operating conditions)
In advance, it must be clarified with the manufacturer whether the device is also suitable for outdoor use.
Always keep a minimum distance of 20 cm from walls or other structural objects. Never expose the device to direct rain, moisture or liquids, as this can lead to damage.
Vibrations, dust or sunlight can also cause damage, avoid them!
Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains voltage. It is highly recommended that you fuse your mains socket with a residual current circuit  breaker (FI).
If you do not use your device for a longer period of time or carry out maintenance work, disconnect the device from the mains in  order to minimize danger. The same applies to storm conditions such as thunderstorms, floods, etc.
Hint! (Fuses)
Replace fuses only with IEC127 type (5x20mm) and the correct rating to ensure optimum performance! It is forbidden to use short-circuited fuses or to bridge the fuse holder. Fuses may only be replaced by qualified personnel. Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient temperature before commissioning.
**Hint! (Unwanted odors)
A new product can sometimes lead to unwanted odours. This reaction is normal and disappears after a few minutes.
Hint! (Possible damage due to magnetic fields)
Speakers cause a static magnetic field. Ensure sufficient distance from equipment that may be affected.
Symbols on device and packaging:
** The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock.
The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual.
The lightning warns you of dangerous voltage accessible from the outside. A connection to any terminal marked with this symbol may only be made with a ready-made cable that complies with the manufacturer‘s recommendations or with cables installed by qualified personnel.
This symbol warns of hot surfaces. To avoid burns – DO NOT touch!
Only suitable for indoor use.
Read the manual.
Please read and follow the warnings and recommendations carefully to ensure safe and trouble-free use.

Installation:

Be sure to check the unit for damage before use. Use the original packaging or a suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use.
During assembly, suitable protective equipment (in particular head protection, gloves and safety shoes) must be worn and only suitable climbing aids (ladders, scaffolding, etc.) must be used. The responsibility for this lies solely with the installation company.
The installation may only be carried out by experts and only at mounting points with sufficient load-bearing capacity, if necessary taking construction requirements into account. The fixing material (screws, dowels, etc.) specified by the manufacturer in the assembly instructions must be used. Screw connections must be secured against loosening by suitable measures.
Fixed or mobile installations shall be protected against falling by two independently acting devices. Loose additional parts or parts which come loose must be able to be caught by suitable devices. National regulations must be observed when using fasteners and fixing elements as well as slings. With regard to the dimensioning of the securing devices, possible dynamic loads (jerking forces) must also be taken into account.
ATTENTION! (Inspection measures)
After installation, check the suspension of the system consisting of bracket and loudspeaker for secure fastening. The operator of loudspeaker systems (stationary or mobile) is obliged to regularly inspect all system components or have them inspected in accordance with the relevant national regulations and to have any damage repaired immediately. Furthermore, we urgently recommend detailed documentation of all inspection measures in test books or similar.
ATTENTION! (Load capacity)
When loudspeakers are longer or permanently used outdoors, wind loads, snow and ice loads as well as thermal influences must be taken into account for the stability and load-bearing capacity of structures and surfaces. In particular, the load-bearing points of flown systems should be dimensioned with sufficient safety reserves. The national regulations must be observed.
WARNING! (Risk of injury from overturning)
Improper installation can cause considerable injury and damage! During transport and installation, ensure that only aids specified by the manufacturer (e.g. trolleys, stands, tripods, brackets, etc.) are used and always follow the manufacturer‘s instructions!
Hint! (Special measures)
Special measures may also be required to prevent spectators from behaving dangerously. Tripods must not be set up in escape and rescue routes. When installing in traffic routes, the  required width of the paths and proper blocking and marking must be ensured. When setting up and setting down a special hazard. Suitable aids must be used for this purpose. he national regulations must be observed.
Using this device with sinusoidal, square-wave or other measuring signals at higher levels will cause serious damage to the device!
Congratulations on your new FAME Audio Speaker!
Thank you for choosing a FAME Audio product. Thanks to efficient development and economical production, FAME Audio makes high-quality products at a fantastic price possible.
Please read these operating instructions carefully to be informed about all functions of this product and keep them for future reference Have fun with your new product!
Your FAME Audio Team
Guarantee:
The current general terms and conditions and guarantee conditions of Music Store professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store professional GmbH Istanbulstr. 22-26 51103 Köln
Managing Director: Michael Sauer
WEEE-Reg.-Nr. DE 41617453
Tel: +49 221 8884-0
Fax: +49 221 8884-2500 info@musicstore.de Scope of Delivery:

Intended use

The product FAME Audio MT-115B, MT-118B, MT-218B und MT-15 MKII was designed for use in sound reinforcement. Incorrect use of the product is considered improper and can lead to personal injury or property damage. Damage resulting from improper use is not liable.
It must be ensured that the device is operated exclusively by trained and competent users who are in full possession of their mental, physical and sensory abilities. The use by other persons is only permitted under the supervision or guidance of a person responsible for their safety.
Set up:
All connections of the device should be made before switching on. Only use high-quality and undamaged cables that are as short as possible for the connections.

• Make sure that the passive speaker is switched off!
• Please note that the voltage setting corresponds to the local mains voltage. Connecting the speakers to the wrong power supply may cause damage!
• Turn the Level controls all the way to the left.
• Connect all relevant signal sources and make sure that they are switched on.
• Always turn on the speaker as the last component.
• Set the desired input and output levels and make sure that the Signal/Limit LED is not lit.

Configuration of the audio input/output connector (Speaker Twist 4 pin): Modell: MT-15 MKII
View:Transfer curve graph: Modell: MT-115B
View: Transfer curve graph: Modell: MT-118B
View: Transfer curve graph: Modell: MT-218B
View: Transfer curve graph:

Specifications:

3 dB)
Nominal impedance| 8 1-2| 8 SI| 8 II| 4 SI
Sensitivity| 97 dB (1M/1W)| 95 dB (1M/1W)| 96 dB (1M/1W)| 101 dB (1M/1W)
Max. SPL| 125 dB SPL| 124 dB SPL| 126 dB SPL, 129 dB SPL peak| 134 dB SPL, 137 dB SPL peak
Subwoofer| lx 15″ subwoofer (3″ voice coil)| lx 15″ subwoofer (4″ voice coil)| lx 18″ subwoofer (4″ voice coil)| 2x 18″ subwoofer (4″ voice coil)
Tweeter| lx 1″ compression driver (lx 1,7″ voice coil)| /| /| /
Output power| 350 W (AES)| 500 W (AES)| 500 W (AES)| 1000 W (AES)
Power handling (Program)| 700 W| 1000 W| 1000 W| 2000 W
Power handling (Peak)| 1400 W| 2000 W| 2000 W| 4000 W
Connector| 2x Speaker Twist 4 pin| 2x Speaker Twist
4 pin| 2x Speaker Twist
4 pin| 2x Speaker Twist 4 pin
Frequency| 2,5 KHz| /| /| /
Suspension| Flight point
Dimensions in mm (W x d x H)| 470 x 435 x 760| 450 x 480 x 560| 550 x 510 x 650| 1160 x 580 x 595
Weight| 19 Kg| 39 Kg| 39 Kg| 72 Kg
At the corner| 100° x 70° (H xV)| /| /| /

Troubleshooting:

The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own!

connections at the inputs and outputs.
The speaker or Speaker Twist cables may be defective. Please replace them.

If the specified corrections have not led to success, please contact our service staff. The contact details can be found at www.musicstore.de

Cleaning:

The ventilation grilles of the unit must be cleaned regularly from impurities such as dust and dirt. Switch off the unit before cleaning and disconnect mains operated units from the mains supply. Use a lint-free, damp cloth for cleaning. Never use alcohol or solvents for cleaning!
Do not open the device. The device does not contain any assemblies or components that can be replaced or maintained by the user.
In case of damage, do not put the device into operation under any circumstances. Service work or repairs may only be carried out by qualified service personnel, in particular in the following cases:

• Objects or liquids have penetrated into the device.
• The unit does not operate as normal.
• The unit has been dropped or the cabinet has been damaged.

Environmental Safety:
The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please recycle the packaging components after use.
Disposal of packaging:
Ensure that paper packaging, plastic materials, etc. are separately recycled. Observe the corresponding disposal instructions on the packaging.
Disposal of batteries and rechargeable batteries:
Batteries do not belong in the garbage! Please keep batteries in accordance with the official collection points or disposal stations in accordance with the specifications.
Disposal of your old device:
Do not dispose of the device with household waste! This device is subject to the WEEE Directive (Waste Electrical and Electronic Equipment) in its currently valid version.
The device will be disposed of by an approved waste disposal company or your local waste disposal office. The regulations valid in your country must be observed!

Hers teller: MUSIC STORE professional GmbH,
Istanbulstraße 22-26,
51103 Köln, Deutschland

References

• MUSIC STORE - Online Shop für Musikinstrumente - Deutschland | MUSIC STORE professional

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>