KNQZE MM-20A-1 Foot Spa Massager User Guide
- May 15, 2024
- KNQZE
Table of Contents
KNQZE MM-20A-1 Foot Spa Massager
Introduction
Thanks for purchasing KNQZE Foot Spa Massager. Please read the user manual carefully before use and keep it in a safe place for future reference. lfyou need any assistance, please contact our customer support.
Package Content
- 1 * Foot Spa Massager
- 1 * User Manual
- (Before use, please make sure that the product is complete without any damage. If you have any doubt, please do not use and contact our customer service.)
Model | WYC-02A |
---|---|
Name | KNQZE Foot Spa Massager |
Rated voltage | 120V(US) |
Rated frequency | 60Hz(US) |
Rated power | 500W |
Product weight | 1.6KG /3.53 lb |
Product dimensions | 413410cm /16.1413.393.94 in |
Product function | Heating Red light Bubble Timing |
Important Safeguards
- Please read the manual carefully before use.
- This product can only be used for the purposes described in this instruction manual.
- Before using this product, please fill with an appropriate amount of water (between “MAX” and “MIN” lines).
- Do not pull the power cord forcefully or hang the product with the power cord to avoid damage.
- Do not immerse the product or any part of it in water.
- The product should be placed horizontally during the use or after use for storage.
- Do not use this product without water inside the tub. After use, please disconnect it from the power supply. Dispose of the water after unplugging the power cord.
- 8. Do not use the product if it is damaged.
- Please stop using the product if you feel discomfort (such as dizziness, headache, etc.) during the use.
- Make sure the power cord and plug are dry and away from heat sources during the use.
- This product is not suitable for people with heart diseases, pregnant women, people with severe thrombosis and cerebral congestion, people with advanced diabetes, and people implanted with medical devices (such as a pacemaker), or can only be used after consulting a doctor.
- Do not stand or place heavy objects in the product.
- Do not fill the product with hot water above 45 t: / 113 “F directly to avoid foot scalds or product deformation.
- Do not use the product temporarily if there is inflammation, trauma or skin burns on feet.
- Do not fill the product with corrosive liquids or liquids containing particulates or floccule.
- Children, the disabled (both physically and mentally), the elderly people who are sluggish, and people insensitive to heat or cold should use this product only under help from others.
- Please place the product in a place beyond reach of children and pets.
- This product is not suitable for use within 30 minutes before and after a meal.
Questions & Answers
Problem | Cause | Solution |
---|---|---|
The product does not heat. | The product has not been connected to the power | |
supply. | Please check and make sure that the product has been connected to the |
power supply.
The product does not work.| The product is not operated properly after being
connected to the power supply.| Please use strictly following the user manual.
The product stops working during the use.| The product has worked beyond the
preset working time.| Please re-start the product.
Please contact our customer service if the above suggestions cannot help solve
your problems.
Product Diagram
-
Panel
-
Control panel
-
Bubble hole
-
Roller
-
Pumice stones
-
Red light
-
Heat source
-
Support rod
-
Folding bucket
-
Bottom board
Control Panel
Product Operation Guide
Before Use
Place the product horizontally, fill with an appropriate amount of water (it
is recommended to fill with warm water of approx. 35°C / 95°F to reduce your
time of waiting), then connect it to the appropriate power supply whose
voltage conforms to that of the product (“OF” will be displayed on the
screen).
ON/OFF
Press the “ON/OFF” button to turn on the product, and the current water
temperature will be displayed. Press this button again to turn off the product
(“OF” will be displayed on the screen).
Temp+ (to turn on the heating function after the product is turned on, you have to press the “TEMP” button first) Press the TEMP ” button to increase the temp by 1°. When the current temp is 48 C/118 ‘JI, press this button once and the temp will shift to 35 C/95 ·p.
Temp – Press the TEMP- ” button to reduce the temp by 1°. That means press this button once and the temp will shift from 48 t:/118 r to 35 ·c ;95 ·F.
Time
The default automatic shutdown time of this product is 60 minutes (automatic
shutdown time can be set to 10 minutes – 20 minutes – 30 minutes – 40 minutes
– 50 minutes – 60 minutes). Click the timer button to display the shutdown
time in turn. When the running time reaches the set time, the product will
automatically shut down. The product will beep three times when counting down
5 minutes. When the time is up, it beeps and shuts down. To restart the VM,
press the ON/OFF key
Red Light + Bubbles
Press the “Red Light + BUBBLE” button to turn on the red light and bubble
function Press this button again to turn off the red light and bubble
function.
After Use
After use, press the “POWER” button to turn off the product (“OF” will be
displayed), disconnect it from the power supply, and dispose of the water.
Environmental Protection
Please do not dispose of the product together with the general household garbage. Hand it over to the government-designated recycling center for environment protection.
Electromotive force (EMF)
This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
Operating steps
Turn on the electricity and add water
- The foot bath is laid flat on the ground
- Place the foot tub flat, press the middle of the foot tub bottom, and pull up the outer front of the foot tub. (NOTE: PULL UP FROM THE FOOT TUB OUTSIDE, NO PULL THE CONTROL PANEL, OTHERWISE WILL DAMAGE THE MACHINE.)
- After the front end is pulled, press down the middle of the foot tub bottom again, and then pull up the outer back end of the foot tub.
- Rotate and push the support rod straight to the groove under the control panel. And add a proper amount of water. (it is recommended to add warm water at about 35 degrees to reduce the waiting time.)
Contact us
Thanks for your purchase KNQZE foot spa massager
Massage roller can offer a deep kneading massage on your feet while and acu- nodes on the bottom well apply pressure to acupoints on the soles to effectively reinvigorate you with added com for and help relieve stress and fatigue, improve your sleeping quality. We usually pack product well and strict check it quality before shipping, but if you have receive the problematic product unfortunately, please don’t worry and feel free to contact us at KNQZEservice@gmail.com
with following information:
- Your order number
- Image of damage product or any questions about product We will try our best to solve it for you and make it right. All of your responses will be used to further improve the quality of our service and product.
Shenzhen KNQZE Technology Co., Ltd.
E-mail:knqzeservice@gmail.com
Add:323 Bantian International Center Building C1 Longing
District, Shenzhen, Guangdong 518000
Documents / Resources
|
KNQZE MM-20A-1 Foot Spa
Massager
[pdf] User Guide
MM-20A-1 Foot Spa Massager, MM-20A-1, Foot Spa Massager, Spa Massager,
Massager
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>