KNQZE P8 Foldable Motorized Foot Spa Massager Instruction Manual

June 16, 2024
KNQZE

KNQZE-logo

KNQZE P8 Foldable Motorized Foot Spa Massager

KNQZE-P8-Foldable-Motorized-Foot-Spa-Massager-product

Specifications

Model P8
Rated Voltage Not specified

Important Safeguards

  • Please read the manual carefully before use.

  • Do not pull the power cord forcefully or hang the product with
    the power cord to avoid damage.

  • The product should be placed horizontally during the use or after use.

  • Do not use this product without water inside the tub. Please disconnect it from the power supply after use. Dispose of the water after unplugging the power cord.

  • Do not use the product if it is damaged.

  • Please stop using the product if you feel unwell (such as dizziness, headache, etc.) during the use.

  • Make sure the power cord and plug are dry and away from heat source during use.

  • This product is not suitable for people with heart diseases, pregnant women, people with severe thrombosis, cerebral congestion,  and advanced diabetes, and people implanted with medical devices(such as a pacemaker), or can only be used after consulting a doctor.

  • Avoid excessive force or impact to prevent product deformation.

  • Do not use the product temporarily if there is inflammation, trauma or skin burns on feet.

  • Do not fill the product with corrosive liquids or liquids containing particulates or floccule.

  • Children, disabled (both physically and mentally), elderly people who are sluggish, and people with reduced sensitivity should be accompanied by others when using this product.

Operation Instruction

Remote Control

  • Digital display – Displays the current time setting.
  • Power button – Turns the product on or off.
  • Timing button – Press to view the current time setting and decrease the time by 10 minutes with each press (time setting range: 10-60 minutes).
  • Massage button – Press to activate or turn off the massage function. Press once to turn off the massage function, and press again to activate the massage function.

Replace the Control Battery
To replace the control battery, follow these steps:

  1. Locate the battery compartment on the remote control.
  2. Open the battery compartment cover.
  3. Remove the old battery.
  4. Insert a new battery with the correct polarity (+/-).
  5. Close the battery compartment cover.

Care and Maintenance
To ensure the longevity and proper functioning of your Foot Spa Massager, please follow these care and maintenance instructions:

  • After each use, unplug the power cord and drain the water from the tub.
  • Clean the tub and other parts of the massager with a soft cloth or sponge dampened with mild detergent.
  • Do not use abrasive cleaners or solvents.
  • Dry all parts thoroughly before storing.

Foot Spa Tips

  • Always check the water temperature before using the foot spa to avoid burns.
  • Add your preferred foot soak or essential oils to enhance your spa experience.
  • Do not exceed the recommended water level indicated on the product.
  • Use the product on a stable and flat surface to prevent accidents.

Shenzhen KNQZE Technology Co., Ltd. E-mail: knqzeservice@gmail.com Add :323 Bantian International Center Building C1 Longgang District, Shenzhen, Guangdong 518000

Introduction

Thanks for purchasing KNQZE Foot Spa Bath Massager. Please read the user manual carefully before use, and keep it in a safe place for future reference. If you need any support, please feel free to contact our customer service.

E-mail: knqzeservice@gmail.com

Package Includede

  • 1 x Foot spa massager
  • 1 x Remote control
  • 1 x User manual

Note :Before use, please make sure that the product is complete without any damage. If you have doubts please do not use and contact us.

Parameter

KNQZE-P8-Foldable-Motorized-Foot-Spa-Massager-fig- 6

Important Safeguard

  1. Please read the manual carefully before use.
  2. Do not pull the power cord forcefully or hang the product with the power cord to avoid damage.
  3. The product should be placed horizontally during the use or after use.
  4. Do not use this product without water inside the tub. Please disconnect it from the power supply after use. Dispose of the water after unplugging the power cord.
  5. Do not use the product if it is damaged,
  6. Please stop using the product if you feel unwell (such as dizziness, headache, etc.) during the use.
  7. Make sure the power cord and plug are dry and away from heat source during use.
  8. This product is not suitable for people with heart diseases, pregnant women, people severe thrombosis, cerebral congestion, and advanced diabetes, people implanted with medical devices (such as a pacemaker), or can only be used after consulting a doctor.
  9. Do not stand or place heavy objects in the tub.
  10. Do not fill the product with hot water above 113°F directly to avoid foot scalds or product deformation.
  11. Do not use the product temporarily if there is inflammation, trauma or skin burns on feet.
  12. Do not fill the product with corrosive liquids or liquids containing particulates or floccule.
  13. Children, disabled (both physically and mentally), elderly people who are sluggish, and people insensitive to heat or cold should use this product only under help from others.
  14. This product is not suitable for use within 30 minutes before and after a meal.
  15. The remote control and control box contains magnets, please stay away from people or things affected by magnetism.
  16. It is strictly forbidden to press and step on the upper cover or the edge of the upper cover in the presence of water.
  17. It is strictly forbidden for non-professionals to disassemble the machine.
  18. Do not put your feet on the edge of the basin or on the basin panel during a foot massage, so as not to cause the basin body to fold and the foot bath water to overflow.

Product Diagram

KNQZE-P8-Foldable-Motorized-Foot-Spa-Massager-fig-
\(1\)

Operation Instrution

ATTENTION

  • You must fill in water before turning on the foot bath massager.
  • Never try to operate this device without water inside.

Unfold
Press the bottom and pull the edge up,then put the supporting rod to the groove.

Fold
Move away the supporting rod and press the edge down.

Power button & the digital display
Press the power button to turn on all functions, and the current water temperature will be displayed on the screen (default working time: 60 minutes, default heating temperature setting: 42°C). Press this button again to turnoff with all functions off. Long press for 2 seconds to turn on/turnoff the bubble and massage functions only.

Remote Control

  • ON/OFF:
    Press the power button to turn on all functions, and the current water temperature will be displayed on the screen (default working time: 60 minutes, default heating temperature setting: 107°F).Press this button again to turnoff with all functions off.

  • Timing:
    Press this button to view the current time setting, and then decrease the time by 10 minutes with press of this button each time(time setting range: 10-60 minutes).

  • Massage:
    Press this button to activate or turn off the massage function. After press the power button to turn on with all functions on, press once to turn off massage function, and press again to activate the massage function.

  • Red Light Bublle:
    The red light and bubble functions are all turned on by default.Press once to turn off the red light, (red light off, bubble on).Press again to turn off the bubble, (red light off, bubble off).Press the third time to turn on the red light, (red light on, bubble off).Press the fourth time to open the bubble, (the red light is on, the bubble is on).Cycle in turn.

  • Temp – :
    Press the temperature “-” button to reduce 1 °. When the water temperature is lower than the preset temperature, the heating function will be turned on automatically(temperature range setting: 95-118°F).

  • Temp +:
    Press the temperature “+” button to add 1 °, when the water temperature reaches the preset temperature, the heating function will be automatically turned off (temperature range setting: 95-118°F).

Replace the Control Battery

  • Push ① and pull ② at the same time, remove the battery box from the remote control, and take out the original battery.
  • Install the CR2025 button battery on the battery box, pay attention to the positive and negative poles of the battery (the positive pole faces down). Install the battery case with the batteries on the remote control,
  • Remote control with fresh batteries.

Care and Maintenance

Drainage:
Before draining, turn off the device and unplug the unit and allow it to cool.

Clean:

  • Clean only with a soft, damp cloth and mild cleansing agent.
  • DO NOT immerse the massager in water or under faucet to do cleaning or filling in water.
  • If there is any dirt on the strainer/medicine box, take the strainer out and remove the dirt and rinse out with water.

Storage:
Before storage, please wipe off any residual moisture with the dry cloth or towel to avoid mold.

  • Store it in its box or in a clean, dry place.
  • Do NOT drag or hang the unit with the power cord.
  • Never put the appliance close to fireplace or other heating sources.

Foot Spa Tips

  • It’s recommended to use once a day (20-30 minutes) with recommended temperature range (100-107°F) for better sleep.
  • You will sweat easily while using the product, so please drink moderate amount of lukewarm water (200-250milliliters) before use.
  • While the body pores are dilated during the foot spa, do not aim body with a fan or air conditioner to avoid cold.
  • Clean promptly after use to prevent formation of water scale.

Questions & Answers

  • Problem: No power
  • Cause: The product is not connected to the power supply properly.
  • Solution: Please check and make sure that the product has been connected to the power supply.
  • Problem: The product does not heat.
  • Cause: Power is not turned on.
  • Solution: Please check and make sure that the product has been connected to the power supply.
  • Problem: The product does not work.
  • Cause: The product is not operated properly after being connected to the power supply.
  • Solution: Please use strictly following the user manual.
  • Problem: The product stops working during use.
  • Cause: The product has worked beyond the preset working time.
  • Solution: Please press the “ON/OFF” button to restart it.
  • Problem: Cannot turn on.
  • Cause: The water temperature exceeds 118°F. Change warm or cold water.

Shenzhen KNQZE Technology Co., Ltd. E-mail: knqzeservice@gmail.com Add:323 Bantian International Center Building C1 Longgang District, Shenzhen, Guangdong 518000

Made in China

Documents / Resources

| KNQZE P8 Foldable Motorized Foot Spa Massager [pdf] Instruction Manual
P8 Foldable Motorized Foot Spa Massager, P8, Foldable Motorized Foot Spa Massager, Motorized Foot Spa Massager, Foot Spa Massager, Spa Massager, Massager
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals