KNQZE WYC-16P Foot Spa Massager User Manual
- June 16, 2024
- KNQZE
Table of Contents
Foot Spa Massager
WYC-16P
WYC-16P Foot Spa Massager
Instruction Manual
Please read the instruction manual carefully prior to use
Introduction
Thanks for purchasing KNQZE Foot Spa Bath Massager. Please read the user
manual carefully before use, and keep it in a safe place for future reference.
If you need any support, please feel free to contact our customer service.
E-mail: knqzeservice@gmail.com
Package Included
1 x Foot spa bath massager
1x Remote control
1 x User manual
Note: Before use, please make sure that the product is complete without
any damage. If you have any doubtsplease do not use and contact us
Parameter
Model | WYC-16P |
---|---|
Name | KNQZE Foot Spa Massager |
Rated Voltage | 120V(US) |
Product dimensions | 42.1*34.5°15. Scm/16.57°13.58″6.1 in |
Product function | Remote Control, Electric Rotary Massage, Temperature |
Control, Bubble, LED & Timer, Collapsible
Rated Frequency| 60Hz(US)
Rated Power| 500W
Product weight| 3.86KG /8.5 Ib
Important Safeguard
- Please read the manual carefully before use.
- Do not pull the power cord forcefully or hang the product with the power cord to avoid damage.
- The product should be placed horizontally during the use or after use.
- Do not use this product without water inside the tub. Please disconnect it from the power supply after use. Dispose of the water after unplugging the power cord.
- Do not use the product if it is damaged.
- Please stop using the product if you feel unwell (such as dizziness, headache, etc.) during the use.
- Make sure the power cord and plug are dry and away from heat source during use.
- This product is not suitable for people with heart diseases, pregnant women, people with severe thrombosis, cerebral congestion, and advanced diabetes, and people implanted with medical devices (such as a pacemaker), or can only be used after consulting a doctor.
- Do not stand or place heavy objects in the tub.
- Do not fill the product with hot water above 113°F directly to avoid foot scalds or product deformation.
- Do not use the product temporarily if there is inflammation, trauma or skin burns on feet.
- Do not fill the product with corrosive liquids or liquids containing particulates or floccule.
- Children, disabled (both physically and mentally), elderly people who are sluggish, and people insensitive to heat or cold should use this product only under help from others.
- This product is not suitable for use within 30 minutes before and after a meal.
- The remote control and control box contains magnets, please stay away from people or things affected by magnetism.
- It is strictly forbidden to press and step on the upper cover or the edge of the upper cover in the presence of water.
- It is strictly forbidden for non-professionals to disassemble the machine.
- Do not put your feet on the edge of the basin or on the basin panel during a foot massage, 5o as not to cause the basin body to fold and the foot bath water to overflow.
Product Diagram
On/Off Button
- When the machine is power-off, press the power button one time to turn on, and the default temperature is set to 106°F. The red-light function and bubble function will be automatically turned on at the same time;
- When the machine is power-on, press the power button one time to turn on the massage function, press the button for the second time to adjust the temperature to 109°F and turn off the massage function, press the button for the third time to turn on the massage function again, press the button for the fourth time to power off;
- In the power-on mode, the heating system works as follows: when the water temperature is >125°F, it will enter the over-heat protection mode, at this time, it will automatically shut down, and the prompt sound will be issued “di di di”
Remote control
Note: remove the insulating plastic sheet on the remote control before
use.
Remote control
e The remote control power-on button part:
a. Press the remote power-on button to turn on; press the remote power-on
button again to turn off;
b. When the machine is power-on, the current temperature is displayed; when
the machine is power-off, it is displayed as OF ;
c. In the power-on mode, the heating system works as follows: when the water
temperature is 2125°F, it will enter the over-heat protection mode, at this
time, it will automatically shut down, and the prompt sound will be issued “di
di di”.
The remote control temperature setting part:
a. The default temperature at startup is 106°F;
b. Press to set the temperature; each press to the button of the temperature
“+” can only increase by 1, and the maximum can only be up to 118°F; the
button “-” can only be reduced by 1 per press, and the minimum can only reach
95°F;
c. Perform corresponding actions in real time according to the difference
between the water temperature and the preset temperature;
d. When the water temperature is lower than the preset temperature, the
heating function will be automatically turned on;
e. When the water temperature reaches the preset temperature, the heating
function will be automatically turned off; And there will be a prompt sound
“di di di”.
The timing button of the remote control:
a.The default time of booting is 60 minutes countdown;
b.The lowest setting to highest setting is 10, 20, 30, 40, 50, 60 minutes;
c.The system will shut down immediately after the setting time countdown and a
beep “di” is issued;
The bubble/red-light function part of the remote control:
a. The red-light function and bubble function will be automatically turned on
after opening the machine;
b. Press the button to turn off the red-light function and bubble function;
The massage function part of the remote control:
a. Press the button to turn on the massage function;
b. Press the button to switch from mode 1, 2, 3 and off;
c. The massage function will automatically turn off after 30 minutes;
Product Operation Guide
Step 1: Unfold the Collapsible Foot Spa Massager
a. Remove the remote control, put the foot bath flat, press the middle of the
foot bath with one hand, and pull up the front end with the other hand.
b. After pulling the front, press the middle part of the tub with one hand and
then pull up the rear end of the foot bath with the other hand.
c. Lightly press the tail of the support rod, rotate the support rod, make the
support rod to the supporting position. Step 2: Connect the power cord
Step
3: Add water & power up
Place the machine flat, fill in a proper amount of water (it is recommended to
fill in warm water around 95°F to reduce your waiting time), turn on the
household power supply(120V/60Hz), turn on the power foot bath, it will prompt
three times “dididi”, and enter the standby mode.
Water temperature Control
When the water temperature < the set temperature 4°F, it will reheat. When the
water temperature>the set temperature, the heating will be stopped, and the
water temperature will be maintained by circulating heating;
Replace the control battery
a. Press position (D) and remove the battery box from the remote control to
take out the original battery.
b. Install the CR2025 button battery on the battery box, please pay attention
to the positive and negative poles of the battery(Positive electrode down).
Install the battery box with the battery on the remote control.
c. The remote control with a new battery. **![KNQZE WYC-16P Foot Spa Massager
- Diagram 4](https://manuals.plus/wp-content/uploads/2024/01/KNQZE-WYC-16P-
Foot-Spa-Massager-Diagram-4.png)Range of remote control:
Within 1 meter
When using, the infrared transmitter on the remote control shall aim at the display screen, within a distance of one meter and at an angle of 90 ° to the red light. There can be no obstruction in between. When fininshing foot massage
Power off the footbath into standby mode, unplug the power supply, and pour out the water; Pull the support rod back by hand to move the support rod, rotate it and install it on the panel, and then press to fold the front and back ends of the footbath, and place the folded footbath
Clean
a. Please make sure the plug is unplugged before cleaning
b. Pour out the water from the tub
c . Wipe the surface of the foot spa with a soft cloth
d. Do not wipe the remote control and the power cord socket with a water- soaked towel
e. Do not clean the foot spa with corrosive liquids
Store**
a. Cut off the power supply, unplug the power cord from the machine, and pour out the water
b. Pour out the water and place it in a safe, ventilated, dry, and cool place to drain
c . Fold the foot bath, place the remote control, and fold the power cord. Put it in the packing box, and then place it in a safe, ventilated, dry and cool place
Questions & Answers
Problem | Cause | Solution |
---|---|---|
No power | The product is not connected to the power supply properly. | Please |
check and make sure that the product has been connected to the power supply.
The product does not heat.| Power is not turned on.| Please check and make
sure that the product has been connected to the power supply.
The product does not work| The product is not operated properly after being
connected to the power supply.| Please use strictly following the user manual.
The product stops working during the use.| The product has worked beyond the
preset working time.| Please press the *ON/OFFs button to restart it.
Can not turn on| The water temperature exceeds 125°F.| Change warm or cold
water.
Shenzhen KNQZE Technology Co., Ltd.
E-mail: kngzeservice@gmail.com
Add:323 Bantian International Center Building C1 Longgang
District, Shenzhen, Guangdong 518000
Made in China
Documents / Resources
|
KNQZE WYC-16P Foot Spa
Massager
[pdf] User Manual
WYC-16P Foot Spa Massager, WYC-16P, Foot Spa Massager, Spa Massager, Massager
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>