VEVOR RC-1837B 4 Bike Storage Rack Instruction Manual

**VEVOR RC-1837B 4 Bike Storage Rack Instruction Manual

**

We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

Safety Notices

Risk of injury!

• Thoroughly read the assembly and operating instructions prior to assembly and follow the individual steps as described in the assembly instructions.

• WARNING! Do not exceed the maximum load capacity! Injuries or product damages may result.

• Routinely inspect all parts on the bike rack. Tighten loose screws and replace defective parts to avoid product damage.

• WARNING! Only set up the bike rack on solid and even surfaces to prevent the product from tipping.

• WARNING! Do not sit persons on the mounted bicycle. Risk of injury.

• DO NOT STEP, CLIMB, OR HANG ON THE STORAGE RACK.

• DO NOT ALLOW SMALL CHILDREN OR PETS TO PLAY IN, ON, OR AROUND THE STORAGE RACK. IMPROPER INSTALLATION AND/OR USE OF THE STORAGE RACK COULD CAUSE SERIOUS INJURY AND/OR DEATH.

• NOTE: Itis our policy to continually improve products and as such we reserve the right to alter data, specification and component parts without prior notice.

• IMPORTANT:
  No liability is accepted for incorrect use of this product.

• Do not exceed a max load of 65 Ibs. x 4Bikes

• Ensure that the storage rack is level before hanging the bicycle.

• Load heaviest bikes at bottom hanger first.

• Do not move your bike side to side after hanging.

• This storage rack is not a toy. Please keep children away from mounted/loaded unit.

CAUTION!
Unconventional or even improper use may put persons at risk or result in damage to the bicycle.

SAVE THESE INSTRUCTIONS

Lower Cantilever：306-850mm
Adjustment Range Of Cantilever（Left）| Upper Cantilever：1197-1958mm
Lower Cantilever：366-910mm
Product Size| 725×715×2047mm

Assembly

| 8pcs
---|---
| 9pcs
| 11pcs
| 38pcs
| 18pcs
| 2pcs

STEP 1: Assemble left support tube. (Need M8*45 2pcs. washer 3pcs and Nut M8 1pc. ).

STEP 2: Assemble right support tube. (Need M8*45 1pc. washer 2pcs and Nut M8 1pc. ).

STEP 3: Connect A the left and right support tubes. (Need M8*45 1pc and washer 1pc. )

STEP 4: Assemble the front connector. (Need M8*45 2pcs. washer 4pcs and Nut M8 2pcs. ).

STEP 5: Assemble the rear connector.(Need M8*45 2pcs. washer 4pcs and Nut M8 2pcs. ).

STEP 6: Assemble the cantilever.

STEP 7: Assemble upper strut and connecting plate.(Need M8*40 8pcs. washer 16pcs and Nut M8 8pcs. ).

STEP 8: Assemble the cantilever.

STEP 9: Assembly strip.(Need M8*40 2pcs. washer 4pcs and Nut M8 2pcs. ).

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730

SHUNSHUN GmbH
Romeracker 922021, 76351
Linkenheim-Hochstetten, Germany

Pooledas Group Ltd
Unit5Albert Edward House, The
Pavilions Preston, United Kingdom

Made In China

Technical Support and E-Warranty Certificate
Wwww.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>