SDMC DV8919 K3 Box Class B Digital Device User Manual
- May 15, 2024
- SDMC
Table of Contents
SDMC DV8919 K3 Box Class B Digital Device
Product Information
Specifications
- Product Name: K3 Box
- Model No: DV8919
- Dimensions: 152.5mm x 101.5mm
- Compliance: FCC Part 15
- Installation: Requires a separation distance of at least 20 cm from all persons
Product Usage Instructions
Installation
- Ensure the device is placed in an area with proper ventilation and at least 20 cm away from any individuals.
- Connect the device to a power outlet on a circuit different from other electronic equipment.
- Refer to the provided instructions for antenna installation to comply with FCC regulations.
Operation
- Power on the device using the designated button or switch.
- Follow the user manual for specific functions and features of the K3 Box.
- If experiencing interference, try repositioning the device or consulting a technician for assistance.
Maintenance
- Avoid making any changes or modifications to the device that are not approved by the manufacturer.
- Dispose of used batteries according to the provided instructions to prevent fire or explosion risks.
FAQ (Frequently Asked Questions)
Q: What should I do if I encounter interference while using the K3 Box?
A: Try repositioning the device to minimize interference, and consult the
user manual for troubleshooting tips. If the issue persists, contact customer
support for further assistance.
Q: How do I properly dispose of used batteries from the K3 Box?
A: Follow the instructions provided in the user manual for safe disposal
of used batteries. Do not dispose of them in regular household waste.
Compliance
Product Name: K3
Box Model No: DV8919
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reason- able protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The Environment for Device
Appropriate Operating Temperature: 0°C-40°C.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION!
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Risk of fire or explosion if the battery is replaced by an incorrect type.
Dispose of Used Batteries According to the Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>