SDMC S905X4 4K Android TV OTT Box User Guide

SDMC S905X4 4K Android TV OTT Box User Guide

Safety instructions

• Presence of live parts inside the device! Do not open. Risk of electric shock!
• No parts should be repaired by users.
• Place the device on a flat, firm and stable surface. Do not put it on a carpet or rug.
• Place the device in a well-ventilated location to prevent the accumulation of internal heat.
• Protect the device from high temperatures, humidity, water and dust.
• Do not place any objects near your device that may damage it (e.g. liquid-filled objects or candles).
• Do not mix old and new batteries and Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cab, ni-mh, etc.) batteries.

Accessory List

Please open the package and check the following accessories:

• TV Box x1
  

• Remote Control x1 Battery x2
  

• User Manual x1
  

• Power Adapter x1
  

• HDMI Cable x1
  

Hardware Structure

Front Panel

Left Side Panel

Back Panel

Remote Control

Instructions

• Indicator Light: Pressed any keys and indicator light flashes and the indicator will flashes quickly when the voltage is low.
• Bluetooth Pairing: Pressed the “OK+ Volume-”keys together on your Remote Control for 10 seconds.
• Google assistant: Press the dedicated button on your remote to quickly access entertainment, get answers on screen, and more using your voice.
• Google and Android are trademarks of Google LLC.

System Connection

Please refer to below instructions to connect TV, Power, Network and other devices.

Note: Please turn off all equipment before connecting. HDMI HDMI

Step1: Connection with TV
Connect HDMI cable to HDMI port of the TV box and TV set.

Step2: Connection with Power
Connect the power adapter to the TV box. After power is on, it can start automatically.

Step3: Set up your device
Follow the on-screen instructions to set up your device.

Step4: Connection with network
The TV box supports both Ethernet and Wi-Fi connections.

• Ethernet: Use the Ethernet cable to connect the LAN port of the TV box and the port of the home broadband network.
• Wi-Fi: Select your Wi-Fi network & key in the password.

Troubleshooting

• No display after power on?
  Confirm your device connected to the TV well and set the correct HDMI Input from your TV configuration.

• TV has images but no sound?
  Make sure your TV is not in mute and low volume.

• Fail to connect to network?
  Make sure the Ethernet cable is properly connected. Make sure Wi-Fi is functional and your box has a strong enough signal from your router.

• Remote Control Failure?

  • Replace the battery of the remote control with a new one, and make sure it is placed in the correct polarity.
  • Make sure the remote control is within the range of the TV box.
  • Go to the Setting menu to unpair and re-pair the remote control.

• Please use our accessories to avoid any risk.

Compliance

The terms HDMI, HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC.
Netfiix is a trademark of Netfiix, Inc. All brands contained herein are trademarks of their respective owners.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>