SDMC NP1257GB AC1200 Dual Band WiFi GPON Terminal Installation Guide

NP1257GB
Quick Installation Guide
AC1200 Dual Band WiFi GPON Terminal

Package Content

• NP1257GB x 1
• Power Adapter x 1
• Ethernet Cable x 1
• Quick Installation Guide x 1

Ports and indicators

Hardware connections

1. Use the included power adapter to connect the power socket to a power outlet. Press the ON/OFF button to turn on the device.
2. Connect a fiber optic cable to the PON port.
3. Connect a computer to the GE port using the Ethernet cable (optional).

WiFi connection

• Using SSID
  Use the SSID and Wireless Key on the device label to connect wireless to the device. On your smartphone or notebook, find this SSID. Enter the Wireless Key to connect.

• Using WPS
  Press the WPS button on the device and the WPS indicator will blink. Then press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection.

Configure on the web

Configure the device on the web page according to the information on the device label.
Open a web browser, enter the IP address, default User Name and Login Password, and then click Login.

LED Indicator Explanation

through LAN port.
| Off| The LAN port is not connected.
---|---|---
WIFI| On| Wi-Fi has been turned on.
Blinking| Wi-Fi data are being transmitted by WLAN band.
Off| Wi-Fi is closed.
WPS| On| The device is successfully connected through WPS function.
Blinking| The device is being connected through WPS function.
Off| The WPS function is not enabled, or 5 minutes after the device is successfully connected through WPS function.

Button Explanation

settings.
WPS| Hold down the WPS button for 1 second and release it to build mesh network.
Hold down the WPS button for 5 seconds and release it to use the WPS connect the device
WiFi| Enable/Disable wireless network.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitier must be installed to provide a separation distance of at least 20 cm from all persons.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>