VEVOR HM2006-UL Digital Electric Hand Mixer User Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR HM2006-UL Digital Electric Hand Mixer
Important information
We continue to be committed to provide you tools with competitive price. “Save
Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.
MODEL: HM2006-UL
This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Warning-To reduce the risk of injury, user must read instructions manual carefully.
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions should always be followed including the following:
-
Read all instructions.
-
Before using, check and ensure that the voltage of your wall outlet corresponds to the one on the rating plate on the bottom of the appliance.
-
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
Contact the manufacturer at their customer service telephone number for information on examination repair, or adjustment -
Do not let the cord hang over the table’s edge, counter, or hot surface.
-
Do not immerse the cord or the mixer’s body in water and other liquid, as this would give rise to electric shock.
-
If the supply cord is damaged, it must be replaced by the manufacturer, service agent, or a similarly qualified person to avoid a hazard.
-
Close supervision is necessary when your appliance is being used near children or infirm persons.
-
Do not let the cord hang over the edge of a table or counter or touch a hot surface, including the stove.
-
Do not place on or near a hot gas or electric burner or in a heated oven.
-
Never eject beaters or dough hooks when the appliance is in operation.
-
Do not leave the mixer unattended while it is operating.
-
Turn any control to “OFF” before unplugging, operating and cleaning. Unplug from the outlet while not in use, before putting on or taking off parts, and before cleaning: To unplug, grasp the plug and pull from the
-
The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
-
Remove the attachments, such as beater, dough, etc., from the mixer before washing.
-
Always disconnect the appliance from the supply if left unattended before assembling, disassembling, or cleaning.
-
Switch off the appliance before changing accessories or approaching parts which move in use.
-
Avoid contacting with moving parts.
-
Keep hands, clothing, as well as spatulas and other utensils away from beaters during operation to reduce the risk of injury to persons, and/or damage to the mixer.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Keep the hand mixer and its cord out of reach of children when it is energized or cooling down.
-
Misuse may cause potential injury.
-
Do not use outdoors.
-
Notes of polarized plug: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way.
lf the plug does not fit fully in the outlet, reverse the plug. lf it still does not fit , contact a qualified electrician. Do not modify the plug in any way. -
Save these instructions.
HOUSEHOLD USE ONLY
EXPLODED DRAWING
NO.| Name of parts| Quantity| | NO.| Name of parts|
Quantity
---|---|---|---|---|---|---
1| right body| 1| 13| Press key2| 1
2| Button bracket| 1| 14| Handle cover| 1
3| Ejector rod| 1| 15| Power cord| 1
4| Wring Spring| 1| 16| Rear cover| 1
5| front cover| 1| 17| Motor rear foot mat| 2
6| Screw| 3| 18| Motor front foot mat| 2
7| PCB| 1| 19| motor| 1
8| Screw| 5| 20| left body| 1
9| Ejector button| 1| 21| Right dough hook| 1
10| screen| 1| 22| Left dough hook| 1
11| press keyl| 1| 23| Beater| 2
12| turbo button| 1| 24| Whisk| 2
PARAMETER SPECIFICATION
Model | Voltage frequency | Rated Power | Max Noise | Low Speed | High Speed |
---|---|---|---|---|---|
HM2006-UL | AC120V 60Hz | 200W | ≤85dB | 650RPM | 1100RPM |
KNOW YOUR MIXER
CONTROL PANEL
BEFORE USING MIXER
Remove any packages and disassemble any detachable parts. Clean the dough hooks and beaters. Before assembling the mixer, ensure the power cord is unplugged from the power outlet.
USING YOUR MIXER
-
Select the beaters or dough hooks according to your demand, and then insert the beaters or dough hooks into the connecting holes of the appliance correctly. The beaters are mainly used for whipping eggs, egg whites, butter, or cream, and the dough hooks are mainly used for kneading dough.
NOTE: The beaters and dough hooks should be installed correctly to prevent them from falling off during working. -
Put the food needed to be processed into a bowl and then put the bowl on a stable surface.
-
Grasp the handle and insert the appliance into the bowl.
-
Connect the appliance with a power source; push the Ejector button to the “ON” position. The display turns on and indicates “00:00”. “0”means the speed setting, while “0:00” means the operating time.
-
Press the “+” button or “-” button; the selected speed will be indicated in the display; and there are 6-speed settings for selection.
-
The appliance starts to work, and the timer begins to count the operating time. If you need to run the mixer at the highest speed, you can hold and press the “Turbo” button to activate the “Turbo” function. WARNING: Do not insert knife, metal spoons, fork and soon into bowl when operating.
-
Keep mixing the food until the food consistency you required is obtained. During this process, the display will indicate the actual operating time.
NOTE: The maximum operating time per time shall not exceed5minutes.An interval of at least 20 minutes must be maintained between continuous two cycles.
NOTE: During working, you can press Power button again to make the appliance stop working.
NOTE: When stirring the liquid ingredients, suggest using the lower speeds .And when kneading yeast dough, suggest using a lows peed firstly and then use a high speed to achieve the best results. -
When mixing is completed, Push the Ejector button to the “OFF” position and then unplug the cord from power outlet.
-
If necessary, you can scrape the excess food particles from the beaters or dough hooks by a rubber or wooden spatula.
-
Press the Ejector button down to remove the beaters or dough hooks.
NOTE: Always unplug the appliance before removing beaters or dough hooks. -
Follow the operation of “CLEANING AND MAINTENANCE” to perform cleaning after use.
COOKERY TIPS
- Refrigerated ingredients, ie. butter and eggs should be at room temperature before mixing begins. Set these ingredients out ahead of time.
- To eliminate the possibility of shells or deteriorated-off eggs in your recipe, break eggs into a separate container firstly, then add to the mixture.
- Do not over-beat. You should only process the mixtures according to the recommended recipe. Fold into dry ingredients only until just combined. Always use the low speeds.
- Climatic conditions. Seasonal temperature changes, temperature of ingredients and their texture variation from area to area all play a part in the required mixing time and the results achieved.
- Always start mixing at the lower speeds. Gradually increase to the recommended speed as stated in the recipe. minute.
Blending flour
Food: Flour, water
Using method: fill the flour 924g and water 665g mixture into bowl,
activating the product with installed dough hooks running at lower speed for
30 seconds, then running at highest speed for 4.30 minutes, the food can be
mixing well.
CLEANING AND MAINTENANCE
-
Unplug the appliance and make it cool down completely before cleaning.
-
Wipe over the outside surface of the head with a dampened cloth and then dry it with a soft dry cloth.
-
Wipe any excess food particles from the power cord.
-
Wash the beaters and dough hooks in warm soapy water and then dry them.
The beaters and dough hooks may be washed in the dishwasher.
CAUTION: The whole appliance can not be immersed in water or other liquid. -
The Hand Mixer should be stored at a dry environment with good draft.
SUGGESTED RECIPES
Recipe (for beaters):
Ingredients:
Maltose : 80g
Honey: 220g
Oatmeal: 60g
Operation:
-
Mix the wheat maltose, honey and Oatmeal , then put them into a bowl.
-
Choose beaters, run the appliance under setting 1 for 3s, then run the appliance under setting 6 for 5mins.
Bread (Dough hooks):
Ingredients:
Wheat flour: 250g
Salt: 5g
White sugar: 10g
Butter (with 80% fat): 10g
Water: 200g
Yeast powder: 3g (according to instruction manual)
Operation: -
Mix the wheat flour, salt and sugar, then put them into a bowl.
-
Put the yeast powder, butter and water into the bowl.
-
Choose dough hook, run the appliance under setting 1 for 10s-15s, then run the appliance under setting 2 for 20s-30s, then run the appliance under setting 5 for 2.5-3.5mins.
-
Warm the dough in a chamber for 45 mins at 35℃.
-
Bake the dough by a toaster oven.
Recipes
Note: These recipes are provided without guarantee.
All information regarding ingredients and preparation is provided as guide
values. Modify the suggested recipes to your personal.
TROUBLESHOOTING
Fault Phenomenon | Cause Analysis | Exclusion Methods |
---|---|---|
Indicator light is not on | The power cord is not plugged in. |
- Check the power cord to make sure it is plugged in.
Indicator Light on Product Inoperative|
- Long working hours, motor overheat protection.
- The machine itself is out of order.
|
- Wait an hour before reusing
- Send to after-sales service department.
Customer support
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>