VEVOR AKS-Z1 Piano Keyboard Stand Instruction Manual
- May 15, 2024
- VEVOR
Table of Contents
VEVOR AKS-Z1 Piano Keyboard Stand
Technical Support and E-Warranty Certificate www.vevor.com/support
PIANO KEYBOARD STAND
MODEL: AKS-21 AKS-21 -AKT-1200E
We continue to be committed to provide you tools with competitive price. “Save Half’, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us
Technical Support and E-Warranty Certificate
www.vevor.com/support
- This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product. Warning-To reduce the risk of injury, user must read instructions manual carefully.
WARNING:
Read this material before using this product. Failure to do so can result in
serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- Weight Restrictions: Do not exceed the maximum weight capacity of this product.
- Do not use this product for any purpose not explicitly specified by the manufacturer. Manufactures are not responsible for damage or injury caused by incorrect assembly or use.
- Inspect before every use; do not use if parts are loose or damaged.
- This product is not a toy and cannot be used as toys for children to play with.
- When adjusting the bracket, prevent hand pinching.
- Before adjusting the bracket, ensure that there are no other items on the bracket.
SAVE THESE INSTRUCTIONS
PACKAGE INCLUSIONS
INSTALLATION GUIDELINES
Step 1: Adjust the crossbeam to the required length and then use the
adjustment knobs to lock it tightly. Adjust the Base to the required height
and then use the adjustment knob to lock it tightly
Step 2: Screw 2 Rubber Feet(or Casters) into each Base.
Step 3 : Attach the assembled Crossbeam to each Base. Pay attention to
the position of the screw hole when installing .
Step 4: Screw the Secure Straps into each Supports and then attach the
keyboards.
Step 5: Screw the Headphone Hook.
HOW TO ADJUST THE HEIGHT
- Loosen the Support adjustment knobs, then pull them out to adjust the proper height and width.
HOW TO ADJUST THE WIDTH
Loosen the Support adjustment knobs, then pull them out to adjust the proper height and width.
HOW TO ADJUST THE CHAIR
Only AKS-Z 1-AKT-1200E By installing bolts in different holes, different heights can be adjusted. Before use, please ensure that the bolts are locked tightly and the X feet are clamped in place. Made In China
- Technical Support and E-Warranty Certificate www.vevor.com/support