XINLEI MAP3 Full Motion TV Wall Mount Instruction Manual
- June 15, 2024
- XINLEI
Table of Contents
MAP3 Full Motion TV Wall Mount
Instruction Manual
MAP3 Full Motion TV Wall Mount
Full Motion TV Wall Mount MAP3
[email protected]
Eull Please ensure your TV weight under 45kg.
WARNING!
- Do not exceed the max weight capacity, otherwise the device may fall or be damaged.
- Check your wall type, it is for wood stud, concrete and brick walls, not for plasterboard drywall.
- The wall must be able to carry 5 times the total weight of TV and bracket.
- Our company disclaim the loss and injury caused by incorrect use.
PACKING LIST
Please confirm all parts are included, if any parts damaged or
missing, please contact our customer service.
INSTALLATION TOOLS (not included)
STEP 1 Loosen the screws and remove the VESA panel
STEP 2 Confirm your TV VESA hole distance
Please confirm your TV using method A/B1/B2 before installation.
[Method] 100 x 100mm, 100x 200mm, 200 100mm, 200 200mm 
(A)/(B) connection
method refers to Method B1/B2.
Connect (A) and (B) to the VESA
panel, tighten them with marked parts.
STEP 3 Install TV and VESA panel
3.1 Choose below screws for your TV
Too short to fix the TV
Too long, damage the TV
3.2 Install TV and VESA panel as Figure I / II
TV Back /Without Spacers
TV Back/With Spacers
STEP 4 Wall mounting
4-1 Use metal detector to check wall wires, and install far away from it. 4-2
Mark wall installation holes with level and pencil
Tools required: Impact Drill+lOmm Drill Bit +(C)+(D)
Tools required: Impact Drill+Smm Drill Bit+(C)
STEP 5 Connect TV and bracket
Hook TV into the head frame
Tighten the screws loosen in step 1
Angles Adjustment
Cable Management