DS18 VMSE High Voltage Voltmeter User Manual
- June 5, 2024
- DS18
Table of Contents
VMSE
USER MANUAL
HIGH VOLTAGE
500V
VOLTMETER
PRESENTATION
The voltmeter and sequencer VSEQ was developed to perform three functions in the same equipment they are:
- Low voltage voltmeter up to 17V
- High-voltage voltmeter up to 500V
- Remote command sequencer
DESCRIPTION
- Selector functions: HOL (Hold) – LIG (ON) – OFF
- Voltmeter selector: LOW – HIGH
- Five remote control outputs
- High input voltage (battery bank)
- GND
- Remote control input
- Low input voltage (+12V)
INSTALLATION EXAMPLE
FUNCTIONS
| FUNCTION | PLAYER | OUTS | VOLTMETER |
|---|---|---|---|
| HOL (Hold) | On | On | Stores lower voltage |
| Off | Off | ||
| LIG (ON) | On | On | On |
| Off | Off | ||
| DES | On | On | On |
| Off | Off | Off |
TECHNICAL FEATURES
VOLTMETER
Low Voltage Measurement| Maximum 17V
High Voltage Measurement| Maximum 500V
SEQUENCER REMOTE CONTROL
Current at output| 150 mA
Low voltage protection| <9.5V
against high voltage protection| >17.0V
DIMENSIONS IN MM| 10x57x17 (WxHxD)
RECOMMENDATIONS AND COMMENTS
- Due to the risk of shock high voltage, look for a speacialized service to perform the installation of this equipment.
- Do not use cables with damaged insulation cover for this installation. Make sure the cables are not being pressed at any point of the installation.
SERVICE WARRANTY
Should your VMSE require service please consult with the dealer from which it
was purchased or DS18 Local Dealer. Do not attempt to return your VMSE
directly to us without first calling for a Return Authorization Number. Units
received without an accompanying Return Authorization Number will be processed
slower.
Additionally, you must include a copy of your purchase receipt from an
authorized dealer for consideration of in-warranty service; otherwise, repair
charges will apply.
Units received without a receipt will be held for 30 days, all units will be
returned to you, unrepaired.