VEVOR LFU4 Trailer Hitch Lock User Manual
- June 17, 2024
- VEVOR
Table of Contents
VEVOR LFU4 Trailer Hitch Lock
Safety Information
WARNING:
Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- Product capabilities apply to properly and completely assembled product only.
Use precautions
- This product is not a toy. Do not allow children to play with or near this item.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
TECHNICAL DETAILS
| Model | LFU4 |
|---|---|
| Pin Diameter | 5/8″ and 1/4″ |
| Pin length | 92mm and 64mm |
| Package included | 5/8″ and 1/4″ Towing Hitch Lock Pin;2 × Lock Head; 4 × Keys; |
1× Spring Clip; 4× Rubber O-rings
FEATURES
-
Push lock and 1/4-turn lock activation design, easy to lock.
-
Watertight dust cap The rubber cap protects the internal locking mechanism against rain water, dirt, road salt and other corrosive elements.
-
One set with two keys This allows you to carry one and store the other in a safe location or give a friend equal access to your trailer hitch setup.
-
Two hole for spring clip A separate spring clip (cotter pin) provides additional safety, can use the locking pin with or without the lock mechanism.
EASY TO INSTALL
- Open the protective rubber cap and place the pin in the lock head, then separating the lock head from the pin.
- Press the button on the lock head to securely lock the pin.
- Align and put the clip in place. Push the clip through the pin hole to add additional safety.
- A separate spring clip and 2 holes provide additional security if you use it with the lock. 2 clip holes in 2″ and 2.5″ for different size receivers.
Imported to USA : Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Made In China
Customer Support
NEED HELP? CONTACT US!
Technical Support and E-Warranty Certificate www.vevor.com/support
Have product questions? Need technical support? Please feel free to contact us: [email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
