VEVOR TM16 Leaf Bowl Trimmer User Manual

VEVOR TM16 Leaf Bowl Trimmer

Product Information

Specifications:

• Model: TM16
• Package size: mm
• Size: inch
• N.W.: kg
• G.W.: kg
• Operating mode: Blade
• Container: Yes
• Transmission ratio: Yes
• Service life: Yes

Product Usage Instructions

Operation:

1. Remove the top from the flower trimmer’s base.
2. Place the untrimmed plants on the grill.
3. Place the top and handle back on the base.
4. Turn the handle clockwise for about 15-30 rounds.
5. Remove the top and collect the plants.
6. Repeat the process for more harvest.

Note: Ensure to clean every part of the trimmer and store it properly after each use.

Frequently Asked Questions

Q: Can I use this trimmer for wet plants?

A: The trimmer is recommended for use with dry plants to ensure optimal performance and longevity of the blades.

Q: How often should I clean the trimmer?

A: It is recommended to clean the trimmer thoroughly after each use to maintain its efficiency and prolong its service life.

Q: Can I purchase replacement blades for this trimmer?

A: Replacement blades are available for purchase. Please contact Customer Service at [email protected] for more information.

We continue to be committed to providing you tools with at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

• [email protected]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product

Warning-To reduce the risk of injury, the user must read the instructions manual carefully.

IMPORTANT SAFETY INSTRUCTIONS

WARNING：

Read all safety warnings, instructions, illustrations and specifications provided with this product. Failure to follow all instructions listed below may result in product damage or serious injury.

Basic Safety Information:

1. This product is for trimming leaves only.
2. The blade is very sharp,beware of injury when using the trimmer to work or replace the blade.
3. Put on the sheath for the blade if you are ready not to the trimmer for a long time.
4. Make sure the lid is on before use.
5. Be gentle with the trimmer when using it. Violent use can result in accidental injury and damage to the trimmer.
6. Never place your fingers, gloves or any other body part in contact with the grill or the blade.
7. Do not use scissors, knives or any instrument above the grill.
8. This product is not a toy. Do not allow children to play with or near this item.

Please Note:

The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from inadequate use or assembly. Please use the trimmers in accordance with existing laws and regulations

Basic parameters

OPERATION

1. Remove the top from the flower trimmer’s base.
   Remove the top from the flower trimmer’s base. The inside of the top contains the high-density rubber tong used to push the plant leaves into the blade grill. The cutting blades or wires are located below the grill.

2. Place the untrimmed plants on the grill
   Place the untrimmed plants on top of the grill. The plans should be enough to make sure the grill surface is covered(approximately 40 dry grams)

3. Place the top and handle back on the base.

4. Turn the handle clockwise for about 15-30 rounds.
   Using the handle, make 15-30 complete turns. While spinning the handle, the inside rubber twist tongues multiply the rate of the spinning plants and blades by over 30 times. A combination of the rubber tongues presses and rolls the plants into the spinning blades can improve the cutting efficiency. Only 30 seconds can yield one hour’s work.

5. Remove the top and collect the plants
   Open the top and the trimmed plants and their frag mental bud/leaves can be found individually on the middle grill and in the trimmer basin. Depending on the type of plants, the trimming can be used for the preparation of plants’ essential oils.

6. Repeat the process for more harvest.
   If you think the leave pieces are not small enough, keep repeating the above process as many times as you want, or until you have completed your harvest. When finished, easily clean every part of the trimmer and store it.

Sanven Technology Ltd.

• Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Technical Support and E-Warranty Certificate

• www.vevor.com/support

References

• Contact Us – Official VEVOR Support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>